(2021):
Durchgängige Simulation der Herstellung und des Einsatzverhaltens sintermetallisch gebundener Schleifscheiben,
dihw - Diamant Hochleistungswerkzeuge, 13 (2021) 1, S. 20-27.
| Datei |
Zeitschriften/Aufsätze
(2021):
Modelling of Process Forces for Complex Multiaxial Turning Processes,
16th International Conference on High Speed Machining, MM Science Journal (2021), October 26-27, 2021, Darmstadt, Germany, S. 5023-5029.
| Datei |
DOI: 10.17973/MMSJ.2021_11_2021147
ISSN: 1803-1269 (Print), 1805-0476 (Online)
DOI: 10.17973/MMSJ.2021_11_2021147
ISSN: 1803-1269 (Print), 1805-0476 (Online)
Konferenz (reviewed)
(2021):
Recycled titanium chips as initial product for the atomisation process of powders for additive manufacturing to increase resource efficiency,
21st Machining Innovations Conference for Aerospace Industry 2021, MIC Procedia (2021), December 1st and 2nd 2021, Hannover, Germany, S. 89–97.
| Datei |
Konferenz (reviewed)
(2021):
Artificial Wear for the Assessment of Monitoring Performance,
54th CIRP Conference on Manufacturing Systems, Procedia CIRP 104 (2021), September 22-24, 2021, Virtual Conference, 1023-1028.
| Datei |
DOI: 10.1016/j.procir.2021.11.172
DOI: 10.1016/j.procir.2021.11.172
Konferenz (reviewed)
(2021):
Sensing linear roller guide carriages for condition monitoring applications,
21st Machining Innovations Conference for Aerospace Industry 2021, MIC Procedia (2021), December 1st and 2nd 2021, Hannover, Germany, S. 78-81.
| Datei |
Konferenz (reviewed)
(2021):
Time Series Search and Similarity Identification for Single Item Monitoring,
Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), September 2021, Dresden, S. 479-487
| Datei |
DOI: https://doi.org/10.1007/978-3-030-78424-9_53
DOI: https://doi.org/10.1007/978-3-030-78424-9_53
Konferenz (reviewed)
(2021):
Parametric grinding wheel model for material removal simulation of tool grinding processes,
18th CIRP Conference on Modeling of Machining Operations, Procedia CIRP 102 (2021), June 15-17, 2021, Ljubljana, Slovenia, S. 381-386.
| Datei |
DOI: 10.1016/j.procir.2021.09.065
DOI: 10.1016/j.procir.2021.09.065
Konferenz (reviewed)
(2021):
Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid components,
The International Journal of Advanced Manufacturing Technology (2021, published online 25. October 2021), 18 Seiten.
| Datei |
DOI: https://doi.org/10.1007/s00170-021-08066-3
DOI: https://doi.org/10.1007/s00170-021-08066-3
Zeitschriften/Aufsätze (reviewed)
(2021):
Charakterisierung thermischer und mechanischer Eigenschaften von bronzegebundenen CBN-Schleifscheiben,
dihw - Diamant Hochleistungswerkzeuge, 13 (2021) 2, S. 12- 17.
| Datei |
Zeitschriften/Aufsätze
(2021):
Einfluss des Pulvers bei der Herstellung sintermetallischer Schleifscheiben – die richtige Wahl entscheidet,
dihw - Diamant Hochleistungswerkzeuge, 13 (2021) 2, S. 16-21.
| Datei |
Zeitschriften/Aufsätze
(2021):
Leistungssteigerung von pCBN-Drehwerkzeugen durch angepasste Schneidkantenmikrogeometrie,
Diamond Business, 2 (2021) 77, S.16-21.
| Datei |
Zeitschriften/Aufsätze
(2021):
Betriebsdaten und ihre aktuellen Potenziale,
ZWF, 116 (2021) 11, S. 852-855.
| Datei |
Zeitschriften/Aufsätze
(2021):
Etablierung eines mechanischen Abrichtverfahrens für das Trennschleifen,
dihw - Diamant Hochleistungswerkzeuge, 13 (2021) 4, S. 8- 12.
| Datei |
Zeitschriften/Aufsätze
(2021):
Kostenkontrolle beim Instandsetzen,
IT&Production (2021) 22, S. 32-33.
| Datei |
Zeitschriften/Aufsätze
(2021):
Data-based ensemble approach for semi-supervised anomaly detection in machine tool condition monitoring,
CIRP Journal of Manufacturing Science and Technology Vol. 35 (2021), S. 795–802.
| Datei |
DOI: https://doi.org/10.1016/j.cirpj.2021.09.003
DOI: https://doi.org/10.1016/j.cirpj.2021.09.003
Zeitschriften/Aufsätze (reviewed)
(2021):
Einsatz von Industrie 4.0-Technologien in der Gastronomie,
Mittelstand-Digital Magazin (2021), Nr. 15, S. 24-29.
| Datei |
Zeitschriften/Aufsätze
(2021):
Cutting inserts made of glass and glass ceramics,
SN Applied Sciences (2021) 3:892, 9 Seiten.
| Datei |
DOI: https://doi.org/10.1007/s42452-021-04887-9
DOI: https://doi.org/10.1007/s42452-021-04887-9
Zeitschriften/Aufsätze (reviewed)
(2021):
Sensorlose Überwachung der Einzelteilfertigung,
WT Werkstattstechnik, 111 (2021), Nr. 5, S. 305-308
| Datei |
DOI: DOI 10.37544/1436–4980–2021–05–39
DOI: DOI 10.37544/1436–4980–2021–05–39
Zeitschriften/Aufsätze (reviewed)
(2020):
Continuous modelling of machine tool failure durations for improved production scheduling,
Production Engineering Research and Development (WGP), Volume 14 (2020) Number 2, April 2020, S. 207-215.
| Datei |
DOI: 10.1007/s11740-020-00955-y
DOI: 10.1007/s11740-020-00955-y
Zeitschriften/Aufsätze (reviewed)
(2020):
Wear mechanism model for grinding of PcBN cutting inserts,
Journal of Materials Processing Technology, Vol. 277 (2020), 11 Seiten.
| Datei |
DOI: 10.1016/j.jmatprotec.2019.116474
DOI: 10.1016/j.jmatprotec.2019.116474
Zeitschriften/Aufsätze (reviewed)
Vortrag
Anzahl der gefundenen Publikationen:
683
(2012):
Bearbeitungsstrategien für Imlantate aus resorbierbaren Magnesiumlegierungen,
Seminar "Werkzeuge für die Zerspanung : Spanende Fertigung für die Medizintechnik, 21. März 2012, Hannover, 34 Seiten.
Vortrag
(2012):
Restrukturierung der Großteilefertigung. Anforderungen an die Fertigungstechnologien und Organisationsabläufe für das Jahr 2015,
MIN Workshop "Die Zukunft der Aluminium-Großteilefertigung", 13. Februar 2012, Varel, 13 Seiten.
Vortrag
(2012):
Development of a Calorimeter to Determine the Chip Heat in Drilling of C45EN,
15th ESAFORM Conference, March 15th, Erlangen, 10 Seiten.
Vortrag
(2012):
Kostenberechnung im Werkzeug- und Formenbau,
EuroGuss, 17. Januar 2012, Nürnberg, 12 Seiten.
Vortrag
(2011):
ZIM Inno True, Höhere Produktivität durch innovatives Abrichten von keramisch gebundenen Wälzschleifwerkzeugen,
Werkstattgespräche, Optimierung spanender Fertigungsprozesse, Fertigungsplanung, Prozessqualifizierung, Bauteilqualität, Garbsen, 20. Januar 2011, 10 Seiten.
Vortrag
(2011):
Tool Concepts for Wire Cutting of Reinforced Concrete,
1st International Conference on Stone and Concrete Machining, November 23rd, 2011, Hannover, 25 Seiten.
Vortrag
(2011):
Machining of Iron-Aluminum Alloys,
European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2011), September 13, 2011, Montpellier, France, 18 Seiten.
Vortrag
(2011):
Simulation of Process Induced Part Distortion for Milling of Aircraft Components,
3rd International Conference on Distortion Engineering (IDE 2011), September 16, 2011, Bremen, 20 Seiten.
Vortrag
(2011):
Grinding of precision forging dies,
Fachmesse EMO Hannover 2011, September 24th, 10 Seiten.
Vortrag
(2011):
Entwicklung von Lösungen für die Bearbeitung bleifreier Messinglegierungen,
Hochschulkupfersymposium, 09. November 2011, Garbsen, 19 Seiten.
Vortrag
(2011):
Formreparaturkosten im Werkzeug- und Formenbau,
Euromold, 01. Dezember 2011, Frankfurt am Main, 15 Seiten.
Vortrag
(2011):
5-Axis Grinding of Micro-Patterns with Adjusted Grinding Wheels. ,
26th Annual Meeting of the American Society for Precision Engineering (ASPE), November 17th, 2011, Denver, 14 Seiten.
Vortrag
(2011):
Optimization of non-cutting tool paths.,
13th CIRP Conference on Modelling of Machining Operations, 13th May 2011, Sintra, Portugal, 12 Seiten.
Vortrag
(2011):
Design and machining of resorbable interference screws.,
SFB 599 Colloquium 2011 "The Modular Man", October 14th - 15th 2011, Hannover, 14 Seiten.
Vortrag
(2011):
Gentelligent Components in Their Lifecycle. Nature-inspired approach for future component generations,
28th International Manufacturing Conference, 31st of August 2011, Dublin, Ireland, 21 Seiten.
Vortrag
(2011):
Design of an Aerostatic Linear Direct Drive,
CIRP January Meetings 2011, 26-28 January, Paris, 20 Seiten.
Vortrag
(2011):
Konstrukteur 2020 - Projektergebnisse der empirischen Studiengangsanalyse.,
1. projektbegleitender acatech Workshop, 27.09.2011, Karlsruhe, 15 Seiten.
Vortrag
(2011):
Model Based Optimization of Forging Process Chains by the Use of a Genetic Algorithm.,
10th ICTP 2011, 26th of September, 2011, Aachen, 18 Seiten.
Vortrag
(2011):
Cohesive Damage of PVD-Coated Cuting Tools - A Result of the Residual Stress Distribution.,
9th International Conference THE "A" Coatings in Manufacturing Engineering, October 3rd, 2011, Thessaloniki, 23 Seiten.
Vortrag
(2011):
Design of Folded Tubulars for Expandable Casing Applications.,
Celle Drilling 2011, 13.09.2011, Celle, 23 Seiten.
Vortrag