Prof. Dr.-Ing. Berend Denkena


Prof. Dr.-Ing. Berend Denkena
Geschäftsführende Leitung
Telefon
Fax
E-Mail
Adresse
An der Universität 2
30823 Garbsen
30823 Garbsen
Gebäude
Raum


Prof. Dr.-Ing. Berend Denkena
Geschäftsführende Leitung
Veröffentlichungen
Zeitschriften/Aufsätze (reviewed)
-
(2023): Reibkoeffizientenermittlung in der Zerspanung auf Basis von Hochgeschwindigkeitsaufnahmen, Tribologie und Schmierungstechnik Vol. 69 (2023), Nr. 5-6, S. 21-27.
DOI: 10.24053/TuS-2022-0041 -
(2023): Identification of the process damping coeffcient in dry and wet machining of steel, The International Journal of Advanced Manufacturing Technology (2023) Nr. 125, published online 16. February 2023, S. 5409–5417
DOI: https://doi.org/10.1007/s00170-023-11082-0 -
(2023): Sharpening of graded diamond grinding wheels, SN Applied Sciences, Vol. 5 (2023), Nr. 145, 10 Seiten.
DOI: https://doi.org/10.1007/s42452-023-05362-3 -
(2023): Investigation of chip formation of Ti–6Al–4V in oxygen‑free atmosphere, The International Journal of Advanced Manufacturing Technology (2023), published online 11. January 2023, 12 Seiten.
DOI: https://doi.org/10.1007/s00170-022-10655-9 -
(2023): Simulation of local contact conditions in the secondary shear zone in dry and wet metal cutting, 19th CIRP Conference on Modeling of Machining Operations, Procedia CIRP, Vol. 117 (2023), S. 293–298.
DOI: 10.1016/j.procir.2023.03.050
ISSN: 2212-8271 -
(2023): Energy efficient supply of cutting fluids in machining by utilizing flow rate control, CIRP Annals - Manufacturing Technology (2023), 4 Seiten.
DOI: https://doi.org/10.1016/j.cirp.2023.04.082 -
(2023): Automated process planning in milling of hybrid components, Production Engineering (2023), published online 10. January 2023, 10 Seiten.
DOI: https://doi.org/10.1007/s11740-022-01180-5 -
(2023): Prozesskettenplanung unter Unsicherheit, WT Werkstattstechnik Vol. 113 (2023) Nr. 4, S. 146-152.
DOI: doi.org/10.37544/1436–4980–2023–04–46 -
(2023): Automatisierte Angebotskalkulation, ZWF (2023), Band 118, Nr. 1-2, S. 79-83.
DOI: 10.1515/zwf-2023-1002
ISSN: 0947-0085 -
(2023): Virtual process for evaluating the influence of real combined module variations on the overall performance of an aircraft engine, GPPS Journal Vol. 7 (2023), S. 95-112.
DOI: https://doi.org/10.33737/jgpps/160055 -
(2023): Tribological Effects of Metalworking Fluids in Cutting Processes, Lubricants Vol. 11 (2023), Nr. 224, 15 Seiten.
DOI: https://doi.org/10.3390/lubricants11050224 -
(2022): Tool wear when using natural rocks as cutting material for the turning of aluminum alloys and plastics, Production Engineering (2022), published online 15. September 2022, 11 Seiten.
DOI: https://doi.org/10.1007/s11740-022-01159-2 -
(2022): Turning Copper and Aluminum Alloys with Natural Rocks as Cutting Tools, materials (2022), Vol. 15, Nr. 5, 12 Seiten.
DOI: https://doi.org/10.3390/ma15062187
ISSN: 1996-1944 -
(2022): Material dependent surface and subsurface properties of hybrid components, Production Engineering (2022), 13 Seiten.
DOI: https://doi.org/10.1007/s11740-022-01128-9 -
(2022): Linear-rotary direct drive for multi-functional machine tools, Cirp Annals - Manufacturing Technology, Vol. 71 (2022) Nr. 1, published online 12. April 2022, S. 349-352.
DOI: https://doi.org/10.1016/j.cirp.2022.03.015 -
(2022): Influence of the atmosphere and temperature on the properties of the oxygen‑affine bonding system titanium‑diamond during sintering, The International Journal of Advanced Manufacturing Technology (2022), 10 Seiten.
DOI: https://doi.org/10.1007/s00170-022-09171-7 -
(2022): Approaches to tailor the cooling supply to the grinding process, SN Applied Sciences, Vol. 309 (2022) Nr. 4, 10 Seiten.
DOI: https://doi.org/10.1007/s42452-022-05198-3 -
(2022): Die Porosität eines Schleifwerkzeugs schon beim Mischen einstellen, WT WerkstattsTechnik BD. 112 (2022), Nr. 3, S. 191-195.
DOI: 10.37544/1436–4980–2021–3–89 -
(2022): Infuence of the powder metallurgy route on the mechanical properties of Cu–Cr–diamond composites, SN Applied Sciences, Vol. 161 (2022), Nr. 4, 10 Seiten.
DOI: https://doi.org/10.1007/s42452-022-05048-2 -
(2022): Operational behaviour of graded diamond grinding wheels for end mill cutter machining, SN Applied Sciences (2022), 10 Seiten.
DOI: https://doi.org/10.1007/s42452-022-04970-9 -
(2022): Dressing of hybrid‑bonded graded diamond grinding wheels, Production Engineering (2022), published online 17. September 2022, 7 Seiten.
DOI: https://doi.org/10.1007/s11740-022-01163-6
ISSN: 0944-6524 -
(2022): Geometrical process design during continuous generating grinding of cutting tools, The International Journal of Advanced Manufacturing Technology (2022), published online 28. June 2022, 12 Seiten.
DOI: https://doi.org/10.1007/s00170-022-09573-7 -
(2022): Simulation‑based design of flank face modification for the milling of Ti‑6Al‑4V and Inconel 718, The International Journal of Advanced Manufacturing Technology (2022), 12 Seiten.
DOI: https://doi.org/10.1007/s00170-022-09016-3 -
(2022): Investigation of the material separation behaviour of rocks using scratch tests for the design of tool grinding processes, SN Applied Sciences (2022), 17 Seiten.
DOI: https://doi.org/10.1007/s42452-022-05038-4 -
(2022): Funktionsorientierte Stellgrößenauslegung beim Drehen, WT Werkstattstechnik Bd. 112 (2022), Nr. 11-12, S. 767-772.
DOI: doi.org/10.37544/1436-4980-2022-11-12-41 -
(2022): Numerical investigation of the infuence of process parameters and tool path on the temperature in the laser glass deposition (LGD) process, Production Engineering (2022), published online 14. September 2022, 10 Seiten.
DOI: https://doi.org/10.1007/s11740-022-01157-4 -
(2022): Effizientes Schmieren der Spanbildungszone, WT Werkstattstechnik, BD. 112 (2022), Nr. 01-02, S. 44-49.
DOI: 10.37544/1436–4980–2021–1–2–48 -
(2022): User-Specifc Parameterization of Process Monitoring Systems, Production Engineering (2022), published online 16. April 2022, 8 Seiten.
DOI: https://doi.org/10.1007/s11740-022-01130-1 -
(2022): Sensorische Schleifspindel fühlt Prozesskräfte beim Werkzeugschleifen, ZWF, Vol. 117 (2022), Nr. 10, S.682-685.
DOI: 10.1515/zwf-2022-1130
ISSN: 0947-0085 -
(2022): Intelligent Manufacturing Cell for Implants, 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (2022), 07.-10. December 2022, Kuala Lumpur, Malaysia, S. 1578-1582.
DOI: 10.1109/IEEM55944.2022.9989587 -
(2022): Process limits in high‑performance peel grinding of hardened steel components with coarse CBN grinding wheels, The International Journal of Advanced Manufacturing Technology (2022), published online 04. April 2022, 12 Seiten.
DOI: https://doi.org/10.1007/s00170-022-09026-1 -
(2022): Wear‑adaptive optimization of in‑process conditioning parameters during face plunge grinding of PcBN, Scientifc Reports (2022), 11 Seiten.
DOI: https://doi.org/10.1038/s41598-022-05066-5 -
(2022): A Contribution to the Understanding of the Grinding of PcBN – Influence of Diamond Specification on Wear during Peripheral Grinding, International Journal of Materials Science and Engineering, Vol 10 (2022), Nr. 3, S. 42-56.
DOI: 10.17706/ijmse.2022.10.3.42-56 -
(2022): Experimental Investigation on the Use of a PEI Foam as Core Material for the In-Situ Production of Thermoplastic Sandwich Structures Using Laser-Based Thermoplastic Automated Fiber Placement, Materials, Vol 15 (2022), Nr. 7141, 15 Seiten.
DOI: https://doi.org/10.3390/ma15207141 -
(2022): Erfasste Betriebsdaten und ihre Qualität, ZWF, Vol. 117 (2022), Nr. 12, S. 847-850.
DOI: 10.1515/zwf-2022-1161
ISSN: 0947-0085 -
(2022): Laser Scanning Based Object Detection to Realize Digital Blank Shadows for Autonomous Process Planning in Machining, Journal of Manufacturing and Materials Processing (2022), 6, 1, 16 Seiten.
DOI: https://doi.org/10.3390/jmmp6010001 -
(2022): Digitale Werkstückmodelle in der Prozessplanung, WT WerkstattsTechnik, Bd. 112 (2022), Nr. 11-12, S. 762-766.
DOI: doi.org/10.37644/1436-4980-2022-11-12-36 -
(2022): Ecological Planning of Manufacturing Process Chains, sustainability (2022), Vol. 14, Nr. 5, 17 Seiten.
DOI: https://doi.org/10.3390/su14052681 -
(2022): Kostenvorteile durch adaptive Prüfplanung, ZWF (2022), Band 117, Nr. 4, S. 178-181.
-
(2022): Evaluation of methods for measuring tool‑chip contact length in wet machining using diferent approaches (microtextured tool, in‑situ visualization and restricted contact tool), Production Engineering (2022), published online 02. April 2022, S. 635–646.
DOI: https://doi.org/10.1007/s11740-022-01127-w -
(2022): Development and analysis of a mechatronic system for in-process monitoring and compensation of straightness deviation in BTA deep hole drilling, Mechanical Systems and Signal Processing 170 (2022), 19 Seiten.
DOI: https://doi.org/10.1016/j.ymssp.2022.108838 -
(2022): A regeneration process chain with an integrated decision support system for individual regeneration processes based on a virtual twin, International Journal of Production Research (2022), published online 04. April 2022, 22 Seiten.
DOI: 10.1080/00207543.2022.2051089 -
(2022): On the Elastohydrodynamic Film‑Forming Properties of Metalworking Fluids and Oil‑in‑Water Emulsions, Tribology Letters, Vol. 71 (2023), Nr. 10, published online 07. December 2022, 13 Seiten.
DOI: https://doi.org/10.1007/s11249-022-01684-2 -
(2022): Influence of Metal Working Fluids in Cutting Processes, Defect and Diffusion Forum, Vol. 414 (2022), S. 51-57.
DOI: https://doi.org/10.4028/p-dnly6l
ISSN: 1662-9507 -
(2022): Infuence of XHV‑adequate atmosphere on surface integrity, Production Engineering (2022), published online 02. July 2022, 7 Seiten.
DOI: https://doi.org/10.1007/s11740-022-01143-w -
(2022): Digital surface twin for ultra-precision high performance cutting, Precision Engineering, Vol. 77 (2022), S. 349–359.
DOI: https://doi.org/10.1016/j.precisioneng.2022.06.010
ISSN: 0141-6359 -
(2022): Design of tool grinding processes for indexable inserts made of rocks, The International Journal of Advanced Manufacturing Technology (2022) Nr. 124, published online 25. November 2022, S.887–905.
DOI: https://doi.org/10.1007/s00170-022-10557-w -
(2021): FE-Simulation Based Design of Wear-Optimized Cutting Edge Roundings, Journal of Manufacturing and Materials Processing, Volume 5 (2021) Issue 4, https://www.mdpi.com/journal/jmmp, 18 Seiten.
DOI: https://doi.org/10.3390/jmmp5040126 -
(2021): Dexel‐Based Simulation of Directed Energy Deposition Additive Manufacturing, Journal of Manufacturing and Materials Processing, Vol. 5 (2021) 1, S. 1-12.
DOI: 10.3390/jmmp5010009 -
(2021): Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid components, The International Journal of Advanced Manufacturing Technology (2021, published online 25. October 2021), 18 Seiten.
DOI: https://doi.org/10.1007/s00170-021-08066-3 -
(2021): Potential of process information transfer along the process chain of hybrid components for process monitoring of the cutting process, Production Engineering Research and Development (WGP), Volume 15 (2021) Nr. 2, April 2021, S. 199-209.
DOI: 10.1007/s11740-021-01023-9 -
(2021): Sensorlose Überwachung der Einzelteilfertigung, WT Werkstattstechnik, 111 (2021), Nr. 5, S. 305-308
DOI: DOI 10.37544/1436–4980–2021–05–39 -
(2021): Controlled turning process for the production of friction-reduced cylinder liners with a defined free-from geometry, Journal of Machine Engineering, Vol. 21 (2021) No. 3, S. 47–59.
DOI: https://doi.org/10.36897/jme/139207
ISSN: 1895-7595 -
(2021): CHARACTERIZATION OF HEAT CONDUCTIVITY OF ECCENTRICALLY ROTATING HEAT PIPES USED FOR COOLING OF MOTOR SPINDLES, MM Science Journal (Special Issue on ICTIMT 2021), July 2021, S. 4698-4705.
DOI: 10.17973/MMSJ.2021_07_2021078 -
(2021): A novel tool monitoring approach for diamond wire sawing, Production Engineering (2021, published online 10. November 2021), 8 Seiten.
DOI: https://doi.org/10.1007/s11740-021-01087-7 -
(2021): Preload monitoring of single nut ball screws based on sensor fusion, CIRP Journal of Manufacturing Science and Technology, Vol. 33 (2021), S. 63-70.
DOI: 10.1016/j.cirpj.2021.02.006 -
(2021): Wirtschaftliche und zuverlässige Zustandsüberwachung - WiZuBe, iGF Industrielle Gemeinschaftsforschung, Schlussbericht Nr. 19882 N (2021), 45 Seiten.
-
(2021): Präzise Mikrostrukturen produktiv fertigen, WT Werkstattstechnik BD. 111 (2021) Nr. 11-12, S. 792-795.
DOI: 10.37544/1436–4980–2021–11–12–22 -
(2021): Magnetführung in der Optikfertigung - Ein magnetgelagerter Linearaktor ermöglicht adaptive Prozesse in der Optikfertigung, ZWF, 116 (2021) 5, S. 279-283.
DOI: 10.1515/zwf-2021-0071 -
(2021): Anticipatory Online Compensation of Tool Deflection Using a Priori Information from Process Planning, Journal of Manufacturing and Materials Processing, 5 (2021) 90, 16 Seiten.
DOI: https://doi.org/10.3390/jmmp5030090 -
(2021): Transfer of Process References between Machine Tools for Online Tool Condition Monitoring, Machines, 9 (2021) 282, 13 Seiten.
DOI: https://doi.org/10.3390/machines9110282 -
(2021): Feeling Machine for Process Monitoring of Components with Stock Allowance, Machines, 9 (2021) 3, S. 1-11.
DOI: 10.3390/ machines9030053 -
(2021): Effects on the deformation-induced martensitic transformation in AISI 304 in external longitudinal turning, Advances in Industrial and Manufacturing Engineering, Vol. 2 (2021), 8 Seiten.
DOI: 10.1016/j.aime.2021.100044 -
(2021): Suitability of natural rocks as materials for cutting tools, SN Applied Sciences (2022) 4:2, 21 Seiten.
DOI: https://doi.org/10.1007/s42452-021-04883-z -
(2021): Performance evaluation of the edge preparation of tungsten carbide inserts applied to hard turning, The International Journal of Advanced Manufacturing Technology, Published online 19th January 2021, 13 Seiten.
DOI: doi.org/10.1007/s00170-020-06585-z -
(2021): Selbstoptimierende Reihenfolgebildung in der Fertigung - Selbstoptimierende Reihenfolgebildung in der Werkstattfertigung durch bestärkendes Lernen, WT Werkstattstechnik, 111 (2021), Nr. 4, S. 212-216.
DOI: 10.37544/1436–4980–2021–04–34 -
(2021): Ontology-based production planning under the consideration of system robustness, 54th CIRP Conference on Manufacturing Systems, Procedia CIRP 104 (2021), 22.-24. September 2021, Virtual Conference, S. 547-552.
DOI: 10.1016/j.procir.2021.11.092 -
(2021): Self‑optimizing process planning of multi‑step polishing processes, Production Engineering Research and Development (WGP), Volume 15 (2021), Juni 2021, S. 563-571.
DOI: 10.1007/s11740-021-01042-6 -
(2021): Data-based ensemble approach for semi-supervised anomaly detection in machine tool condition monitoring, CIRP Journal of Manufacturing Science and Technology Vol. 35 (2021), S. 795–802.
DOI: https://doi.org/10.1016/j.cirpj.2021.09.003 -
(2021): Gentelligent processes in biologically inspired manufacturing, CIRP Journal of Manufacturing Science and Technology, Vol. 32 (2021), S. 1-15.
DOI: 10.1016/j.cirpj.2020.09.015 -
(2021): Ressourceneffizientes Umschleifen verschlissener VHM-Werkzeuge, WT WerkstattsTechnik Bd. 111 (2021) Nr. 6, S.430-434.
DOI: 10.37544/1436-4980-2021-06-74 -
(2021): A novel approach to determine the velocity dependency of the friction behavior during machining by means of digital particle image velocimetry (DPIV), CIRP Journal of Manufacturing Science and Technology 32 (2021), S. 81–90.
DOI: https://doi.org/10.1016/j.cirpj.2020.11.007 -
(2021): Influence of the Sintering Process on Productivity and Energy Efficiency in the Production of Bronze-Bonded Grinding Wheels, International Journal of Materials Science and Engineering, Vol. 9 (2021) Nr. 4, S. 48-58.
DOI: 10.17706/ijmse.2021.9.4.48-58 -
(2021): Influence of metal working fluid on chip formation and mechanical loads in orthogonal cutting, The International Journal of Advanced Manufacturing Technology (2022, published online 08. October 2021), 9 Seiten.
DOI: https://doi.org/10.1007/s00170-021-08164-2 -
(2021): Process design of a novel combination of peel grinding and deep rolling, Production Engineering (2021, published online 04. December 2021), 10 Seiten.
DOI: https://doi.org/10.1007/s11740-021-01092-w -
(2021): Numerical and experimental analysis of thermal and mechanical tool load when turning AISI 52100 with ground cutting edge microgeometries, CIRP Journal of Manufacturing Science and Technology 35 (2021), S. 494–501.
DOI: https://doi.org/10.1016/j.cirpj.2021.08.006 -
(2021): Surface topography after deep rolling with milling kinematics, Production Engineering Research and Development (WGP), Volume 15 (2021), Juni 2021, S. 587-593.
DOI: 10.1007/s11740-021-01031-9 -
(2021): Entwicklung von Seilschleifwerkzeugen, WT Werkstattstechnik BD. 111 (2021) NR. 4, S. 265-269.
DOI: 10.37544/1436–4980–2021–04–87 -
(2021): Fabrication and use of Cu-Cr-diamond composites for the application in deep feed grinding of tungsten carbide, Diamond & Related Materials, Vol. 120 (2021), S. 1-6.
DOI: https://doi.org/10.1016/j.diamond.2021.108668 -
(2021): Prediction of plastic surface defects for 5-axis ball end milling of Ti-6Al-4 V with rounded cutting edges using a material removal simulation, CIRP Annals - Manufacturing Technology, Vol. 70 (2021), S. 91-94.
DOI: 10.1016/j.cirp.2021.04.013 -
(2021): Produktive Schleifbearbeitung von PcBN, WT Werkstattstechnik BD. 111 (2021), Nr. 10, S. 740-744
DOI: 10.37544/1436–4980–2021–10–86 -
(2021): Identification of rake and flank face engagement parameters using a dexel-based material removal simulation with an oriented sweep volume, CIRP Journal of Manufacturing Science and Technology, Vol. 35 (2021), S. 146-157.
DOI: 10.1016/j.cirpj.2021.06.002 -
(2021): Gradierte Schleifscheiben beim Nutentiefschliff, WT WerkstattsTechnik Bd. 111 (2021) Nr. 11-12, S. 829-832.
DOI: 10.37544/1436-4980-2021-11-12-59 -
(2021): Using tool wear to increase process stability when milling Al7075 and AISI 4140+QT, Production Engineering Research and Development (WGP), published online: 13 May 2021, 11 Seiten.
DOI: 10.1007/s11740-021-01059-x -
(2021): High performance peel grinding of steel shafts using coarse electroplated CBN grinding wheels, Production Engineering Research and Development (WGP), published online: 31 March 2021, 8 Seiten.
DOI: 10.1007/s11740-021-01047-1 -
(2021): Influence of End Mill Manufacturing on Cutting Edge Quality and Wear Behavior, Journal of Manufacturing and Materials Processing, 5 (2021) 77, 16 Seiten.
DOI: https://doi.org/10.3390/jmmp5030077 -
(2021): Influence of dressing strategy on tool wear and performance behavior in grinding of forming tools with toric grinding pins, Production Engineering (2021, published online 02. December 2021), 10 Seiten
DOI: https://doi.org/10.1007/s11740-021-01089-5 -
(2021): Influence of Turn-Rolling on the Residual Stresses and Microstructure of C45E and the Effects on Fatigue Life under Cyclic Loading, HTM, J. Heat Treatm. Mat., 76 (2021) 3, S. 195-204.
DOI: 10.1515/htm-2021-0003 -
(2021): Praxisbericht: Gestaltung einer Online-Lernplattform über die Digitalisierung in der Produktion unter Verwendung von OER-Bildungsmaterialien, Journal of Technical Education (JOTED), 9 (2021) 1, S. 128-154.
ISSN: 2198-0306 -
(2021): Quantum algorithms for process parallel flexible job shop scheduling, CIRP Journal of Manufacturing Science and Technology, Vol. 33 (2021), S. 100-114.
DOI: 10.1016/j.cirpj.2021.03.006 -
(2021): Influence of a Dynamic Consolidation Force on In Situ Consolidation Quality of Thermoplastic Composite Laminate, Journal of Composites Science, Vol. 5 (2021) 3, 12 Seiten.
DOI: 10.3390/jcs5030088 -
(2021): An optical‑fow‑based monitoring method for measuring translational motion in infrared‑thermographic images of AFP processes, Production Engineering (2021, punlished online, 19. October 2021), 10 Seiten.
DOI: https://doi.org/10.1007/s11740-021-01084-w -
(2021): Development of a Shape Replicating Draping Unit for Continuous Layup of Unidirectional Non-Crimp Fabrics on Complex Surface Geometries, Journal of Composites Science, Vol. 5 (2021) 4, 13 Seiten.
DOI: 10.3390/jcs5040093 -
(2021): Integration additiver Herstellverfahren in die industrielle Prozess-, Fertigungs- und IT-Kette, Frauenhofer IAPT (2021), 144 Seiten.
DOI: 10.24406/IAPT-N-637938 -
(2021): Hochdynamisches Festwalzwerkzeug, WT Werkstattstechnik BD. 111 (2021) NR. 11-12, S. 851-856.
DOI: 10.37544/1436–4980–2021–11–12–82 -
(2021): Investigation on the temperature dependent morphology of deposited fibers for laser based glass additive manufacturing, Engineered Transparency (2021), Glass in Architecture and Structural Engineering John Wiley & Sons, Inc. Berlin (2021), 10 Seiten.
-
(2020): Prediction of part distortion in re-contouring processes, CIRP Journal of Manufacturing Science and Technology, Vol. 29 (2020), S. 25-35.
DOI: 10.1016/j.cirpj.2020.01.006 -
(2020): Influence of the Manufacturing Process on the Local Properties of Bronze-Bonded Grinding Tools, Journal of Manufacturing Science and Engineering, Vol. 142 (2020), S. 061004-1 - 061004-8.
DOI: 10.1115/1.4046744 -
(2020): Correlation between Coating Properties and Thermal Load of CrAlN-Coated Cutting Tools During Machining of AISI4140, Defect and Diffusion Forum, Vol. 404 (2020), S. 53-60.
DOI: 10.4028/www.scientific.net/DDF.404.53
ISSN: 1662-9507 -
(2020): Production-Related Surface and Subsurface Properties and Fatigue Life of Hybrid Roller Bearing Components, Metals, Vol. 10 (2020) 10, 17 Seiten.
DOI: 10.3390/met10101339 -
(2020): Modelagem e análise numéricas da operação de roleteamento do aço ABNT 4140, Revista Matéria, Vol. 25 (2020) Nr. 2, 21 Seiten.
DOI: 10.1590/S1517-707620200002.1065 -
(2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing Raceway, Metals, Vol. 10 (2020) 10, 19 Seiten.
DOI: 10.3390/met10101363 -
(2020): Analytic roughness prediction by deep rolling, Production Engineering Research and Development (WGP), Volume 14 (2020) Number 3, June 2020, S. 345-354.
DOI: 10.1007/s11740-020-00961-0 -
(2020): Cooling of motor spindles—a review, The International Journal of Advanced Manufacturing Technology, Vol. 110 (2020) 11-12, S. 3273-3294.
DOI: 10.1007/s00170-020-06069-0 -
(2020): Die fühlende Seilschleifmaschine - Entwicklung einer kraftgeregelten vollelektrischen mobilen Seilschleifmaschine, wt Werkstattstechnik online, 110 (2020) Nr. 9, S. 602-607.
-
(2020): KI-gestützte Prozessüberwachung in der Zerspanung, ZWF, 115 (2020) 5, S. 295-298.
DOI: 10.3139/104.112282 -
(2020): Anwenderfreundliche Prozessüberwachungssysteme - Nachvollziehbare und automatische Parametrierung durch aufgabenorientierte Modularisierung, wt Werkstattstechnik online, Jahrgang 110 (2020), Nr. 6, S. 435-439.
-
(2020): Reconstruction of Process Forces in a Five-Axis Milling Center with a LSTM Neural Network in Comparison to a Model-Based Approach, Journal of Manufacturing and Materials Processing, Vol. 4 (2020) 3, S. 1-13.
DOI: 10.3390/jmmp4030062 -
(2020): Feeling Machine for Process Monitoring of Turning Hybrid Solid Components, Metals, Vol. 10 (2020) 7, 12 Seiten.
DOI: 10.3390/met10070930 -
(2020): Single grain grinding: a novel approach to model the interactions at the grain/bond interface during grinding, The International Journal of Advanced Manufacturing Technology, Vol. 107 (2020) 11-12, S. 4811-4822.
DOI: 10.1007/s00170-020-05219-8 -
(2020): Chip formation in machining hybrid components of SAE1020 and SAE5140, Production Engineering Research and Development (WGP), published online: 13 November 2020, 11 Seiten.
DOI: 10.1007/s11740-020-00993-6 -
(2020): Influence of Residual Stresses in heat-treated High-Speed Steels on the Adhesion of CrAlN Coatings, HTM, J. Heat Treatm. Mat., 75 (2020) 3, S. 163-176.
DOI: 10.3139/105.110413 -
(2020): Continuous modelling of machine tool failure durations for improved production scheduling, Production Engineering Research and Development (WGP), Volume 14 (2020) Number 2, April 2020, S. 207-215.
DOI: 10.1007/s11740-020-00955-y -
(2020): Wear Behaviour of Coated Cemented Carbide Inserts in an Oxygen-Free Atmosphere when Machining Ti-6Al-4V, Defect and Diffusion Forum, Vol. 404 (2020), S. 28-35.
DOI: 10.4028/www.scientific.net/DDF.404.28
ISSN: 1662-9507 -
(2020): Statistical approaches for semi-supervised anomaly detection in machining, Production Engineering Research and Development (WGP), Volume 14 (2020) Number 2, April 2020, S. 385-393.
DOI: 10.1007/s11740-020-00958-9 -
(2020): Digitalisierung mit Weiterbildung gestalten - Handlungsfelder für die Weiterbildung zur Digitalisierung nutzen, wt Werkstattstechnik online, Jahrgang 110 (2020), Nr. 4, S. 241-244.
-
(2020): Optimization of delivery adherence based on capacity planning and bid pricing, Production Engineering Research and Development (WGP), Volume 14 (2020) Number 3, April 2020, S. 309-318.
DOI: 10.1007/s11740-020-00959-8 -
(2020): Process stability of a novel roughing‑finishing end mill, Production Engineering Research and Development (WGP), Volume 14 (2020) Number 3, S. 395-405.
DOI: 10.1007/s11740-020-00963-y -
(2020): Time-domain simulation of milling processes including process damping, CIRP Journal of Manufacturing Science and Technology, Vol. 30 (2020), S. 149-156.
DOI: 10.1016/j.cirpj.2020.05.003 -
(2020): Wear mechanism model for grinding of PcBN cutting inserts, Journal of Materials Processing Technology, Vol. 277 (2020), 11 Seiten.
DOI: 10.1016/j.jmatprotec.2019.116474 -
(2020): Influence of the cutting direction angle on the tool wear behavior in face plunge grinding of PcBN, Wear, Vol. 454-455 (2020), 12 Seiten.
DOI: 10.1016/j.wear.2020.203325 -
(2020): Additive manufacturing of metal-bonded grinding tools, The International Journal of Advanced Manufacturing Technology, Vol. 107 (2020) 5-6, S. 2387-2395.
DOI: 10.1007/s00170-020-05199-9 -
(2020): Novel continuous generating grinding process for the production of cutting tools, CIRP Journal of Manufacturing Science and Technology, Vol. 28 (2020), S. 1-7.
DOI: 10.1016/j.cirpj.2020.02.001 -
(2020): Einfluss der Schleifscheibenanstellung auf die Oberflächenqualität - Bearbeitungswinkel zur Produktivitätsoptimierung beim Schleifen freigeformter Oberflächen, wt Werkstattstechnik online, Jahrgang 110 (2020), Nr. 6, S. 389-392.
-
(2020): Grinding of transformation-toughened mixed oxide ceramic, The International Journal of Advanced Manufacturing Technology, Vol. 109 (2020), S. 1463-1478.
DOI: 10.1007/s00170-020-05728-6 -
(2020): Influence of tool material properties on the wear behavior of cemented carbide tools with rounded cutting edges, Wear, Vol. 456-457 (2020), 8 Seiten.
DOI: 10.1016/j.wear.2020.203395 -
(2020): Process design for 5‑axis ball end milling using a real‑time capable dynamic material removal simulation, Production Engineering Research and Development (WGP), Volume 15 (2021) Number 1, February 2021, S. 89-95.
DOI: 10.1007/s11740-020-01003-5 -
(2020): Influência da operação de roleteamento sobre a integridade superficial do aço ABNT 1020, Revista Matéria, Vol. 25 (2020) Nr. 2, 13 Seiten.
DOI: 10.1590/S1517-707620200002.1051 -
(2020): Influence of the Carbon Content on the Surface Integrity of Deep Rolled Steels, Journal of Tribology, published online: November 25, 2020, 10 Seiten.
DOI: 10.1115/1.4049109 -
(2020): Generation of tailored subsurface zones in steels containing metastable austenite by adaptive machining and validation by eddy current testing, tm - Technisches Messen, online veröffentlicht: 15.10.2020, 9 Seiten.
DOI: 10.1515/teme-2020-0045 -
(2020): Grinding Strategies for Local and Stress Orientated Subsurface Modification of Sheet-Bulk Metal Forming Tools, Industrial Colloquium of the Transregional Collaborative Research Centre 73; TCRC73 2020: Sheet Bulk Metal Forming (published online 05. November 2020), S. 286-306.
DOI: 10.1007/978-3-030-61902-2_13
ISBN: 978-3-030-61902-2 -
(2020): Experimental and numerical analysis of hard turning with multi-chamfered cutting edges, Journal of Manufacturing Processes, Vol. 49 (2020), S. 126-134.
DOI: 10.1016/j.jmapro.2019.11.025 -
(2020): Towards Dry Machining of Titanium-Based Alloys: A New Approach Using an Oxygen-Free Environment, Metals, Vol. 10 (2020) 9, 8 Seiten.
DOI: 10.3390/met10091161 -
(2020): Estudo sobre a integridade superficial do aço ABNT 4140 após a operação de torneamento, Revista Matéria, Vol. 25 (2020) Nr. 2, 12 Seiten.
DOI: 10.1590/S1517-707620200002.1027 -
(2020): Synergistic approaches to ultra-precision high performance cutting, CIRP Journal of Manufacturing Science and Technology, Vol. 28 (2020), S. 38-51.
DOI: 10.1016/j.cirpj.2019.12.001 -
(2020): Formation of White Etching Layers by Deep Rolling of AISI 4140 Steel, Journal of Materials Engineering and Performance, Vol. 29 (7) 2020, S. 4351-4359.
DOI: 10.1007/s11665-020-04988-3 -
(2020): Influence of Cemented Carbide Composition on Cutting Temperatures and Corresponding Hot Hardnesses, Materials, Vol. 13 (2020), 14 Seiten.
DOI: 10.3390/ma13204571 -
(2020): Electrical energy and material efficiency analysis of machining, additive and hybrid manufacturing, Journal of Cleaner Production, 251 (2020), 10 S.
DOI: 10.1016/j.jclepro.2019.119731 -
(2019): Chip Formation of Rounded Cutting Edges, International Journal of Precision Engineering and Manufacturing, published online: 07 February 2019, 8 Seiten.
DOI: 10.1007/s12541-019-00020-4 -
(2019): Increasing the measuring accuracy of a sensory swing clamp by multi-sensor evaluation, Journal of Manufacturing Science and Engineering, Vol. 141 (2019), S. 111007-1 - 111007-8.
DOI: 10.1115/1.4044714 -
(2019): Ein Roboter für die effiziente Zerspanung, wt Werkstattstechnik online, Jahrgang 109 (2019), Heft 3, S. 194 - 198.
-
(2019): Einzelteilüberwachung in Beschleunigungsphasen, wt Werkstattstechnik online, Jahrgang 109 (2019), Heft 5, S. 347 - 351.
-
(2019): Surface integrity of turned laser-welded hybrid shafts, Production Engineering Research and Development, published online: 04th December 2018, 9 Seiten.
DOI: 10.1007/s11740-018-0862-8 -
(2019): Self‑optimizing process planning for helical flute grinding, Production Engineering Research and Development (WGP), published online: 7 June 2019, 8 Seiten.
DOI: 10.1007/s11740-019-00908-0 -
(2019): Berücksichtigung von Oberflächeneigenschaften in der CAD/CAM-Kette - Automatische Auswahl von Prozessstellgrößen durch integrierte Prozessmodelle, ZWF, 114 (2019) 11, S. 702-706.
-
(2019): Methodology for integrative production planning in highly dynamic environments, Production Engineering Research and Development (WGP), published online: 23 February 2019, 8 Seiten.
DOI: 10.1007/s11740-019-00889-0 -
(2019): Kontinuierliches Wälzschleifen - Thermische und mechanische Belastung beim kontinuierlichen Wälzschleifen mit cBN-Schleifwerkzeugen, wt Werkstattstechnik online, Jahrgang 109 (2019), Heft 6, S. 471 - 476.
-
(2019): Wear mechanisms of CVD diamond tools for patterning vitrified corundum grinding wheels, Wear, published online: 13 August 2019, 8 Seiten.
DOI: 10.1016/j.wear.2019.203007 -
(2019): Model-based manufacturing and application of metal-bonded grinding wheels, CIRP Annals-Manufacturing Technology, 68 (2019), S. 321-324.
-
(2019): Computerunterstützte Schleifwerkzeugherstellung - Simulation der Prozesskette zur Herstellung metallisch gebundener Schleifwerkzeuge, wt Werkstattstechnik online, Jahrgang 109 (2019), Heft 6, S. 462 - 465.
-
(2019): New profiling approach with geometrically defined cutting edges for sintered metal bonded CBN grinding layers, Journal of Materials Processing Technology, published online: 25 October 2019, 11 Seiten.
-
(2019): On the pulsed laser ablation of polycrystalline cubic boron nitride — Influence of pulse duration and material properties on Ablation characteristics, Journal of Laser Applications, 31, 022004 (2019), 12 Seiten.
DOI: 10.2351/1.5084724 -
(2019): Suitability of integrated sensors for the determination of chatter characteristics in a cylindrical grinding machine, The International Journal of Advanced Manufacturing Technology, published online: 01 February 2019, 6 Seiten.
DOI: 10.1007/s00170-019-03323-y -
(2019): Simulation-based compensation of deflection errors in helical flute grinding, CIRP Journal of Manufacturing Science and Technology, published online: 27 November 2019, 7 Seiten.
DOI: 10.1016/j.cirpj.2019.11.002 -
(2019): AUTONOMOUS MACHINING – RECENT ADVANCES IN PROCESS PLANNING AND CONTROL, Journal of Machine Engineering, Vol. 19, No. 1 (2019), S. 28-37.
-
(2019): Prediction of Ground Surfaces by Using the Actual Tool Topography, Journal of Manufacturing and Materials Processing, Vol. 3 (2019) 2, S. 1-9.
DOI: 10.3390/jmmp3020040 -
(2019): Chamfer texturing of tungsten carbide inserts applied to turning of grey cast iron, The International Journal of Advanced Manufacturing Technology, published online: 30 August 2019, 10 Seiten.
DOI: 10.1007/s00170-019-04358-x -
(2019): Prediction of surface residual stress and hardness induced by ball burnishing through neural networks, International Journal of Manufacturing Research, Vol. 14 (2019) 3, S.295-310.
-
(2019): Energy efficiency improvement of machine tool spindle cooling system with on–off control, CIRP Journal of Manufacturing Science and Technology, Vol. 25 (2019), S. 14-21.
DOI: 10.1016/j.cirpj.2019.04.003 -
(2019): Surface Integrity of Laser Beam Welded Steel–Aluminium Alloy Hybrid Shafts after Turning, metals, Vol. 9 (2019) 134, published online: 26 January 2019, 13 Seiten.
DOI: 10.3390/met9020134 -
(2019): Deep learning-based classification of production defects in automated-fiber-placement processes, Production Engineering Research and Development (WGP), published online: 21 March 2019, 9 Seiten.
DOI: 10.1007/s11740-019-00893-4 -
(2019): Artificial intelligence for non‑destructive testing of CFRP prepreg materials, Production Engineering Research and Development, published online: 06 July 2019, 10 Seiten.
-
(2018): Analysis of potentials to improve the machining of hybrid workpieces, Production Engineering Research and Development, published online: 19th December 2018, 9 Seiten.
DOI: 10.1007/s11740-018-00870-3 -
(2018): Highly Dynamic Spindle Integrated Magnet Actuators for Chatter Reduction, Int. J. of Automation Technology, Vol. 12 (2018) No. 5, S. 669-677.
-
(2018): Frictionally damped tool holder for long projection cutting tools, Production Engineering Research and Development (WGP), Volume 12 (2018) Number 6, S. 715 - 722.
-
(2018): Investigations on a predictive process parameter adaptation for machining of hybrid workpieces, CIRP Journal of Manufacturing Science and Technology, published online: 31. Oktober 2018, 5 Seiten.
DOI: 10.1016/j.cirpj.2018.10.004 -
(2018): Impact of hybrid workpieces on statistical process monitoring of machining operations, The International Journal of Advanced Manufacturing Technology, Published online 10 August 2018, 7 Seiten.
-
(2018): Material identification based on machine learning algorithms for hybrid workpieces during cylindrical operations, Journal of Intelligent Manufacturing, published online: 22 February 2018, 8 Seiten.
-
(2018): Feeling machines for online detection and compensation of tool deflection in milling, CIRP Annals - Manufacturing Technology 67 (2018), S. 423–426.
-
(2018): Laser material removal on cutting tools from different materials and its effect on wear behavior, Metal Powder Report, Vol. 73 (2018) 1, S. 26-31.
-
(2018): Effect of Post-Process Machining on Surface Properties of Additively Manufactured H13 Tool Steel. Einfluss der Nachbearbeitung auf Oberflächeneigenschaften von additiv gefertigtem H13-Werkzeugstahl , HTM, J. Heat Treatm. Mat., 73 (2018) 4, S. 173-185.
-
(2018): Influence of Tool Properties on the Thermomechanical Load during Turning of Hybrid Components and the Resulting Surface Properties. Einfluss von Werkzeugeigenschaften auf die thermomechanische Belastung beim Außenlängsdrehen hybrider Bauteile und die resultierenden Oberflächeneigenschaften , HTM, J. Heat Treatm. Mat. 73 (2018) 4, S. 223-231.
-
(2018): Influence of customized cutting edge geometries on the workpiece residual stress in hard turning, Journal of Engineering Manufacture, 2018, Vol. 232 (12), S. 2132 - 2139.
-
(2018): Fertigungsplanung und -steuerung für die vernetzte Produktion von morgen, wt Werkstattstechnik online, Jahrgang 108 (2018) H. 4, Seite 235-239.
-
(2018): A new process chain for recycling of cemented carbide milling tools, Production Engineering Research and Development (WGP), Volume 12 (2018) Number 3-4, S. 547-553.
-
(2018): Process parallel simulation of workpiece temperatures using sensory workpieces, CIRP Journal of Manufacturing Science and Technology, Vol. 21 (2018), S. 140-149.
DOI: 10.1016/j.cirpj.2018.01.004 -
(2018): Self-optimizing tool path generation for 5-axis machining processes, CIRP Journal of Manufacturing Science and Technology, published online: 07 December 2018, 6 Seiten.
DOI: 10.1016/j.cirpj.2018.11.005 -
(2018): Grinding tool design for the manufacturing of UHC-steel, The International Journal of Advanced Manufacturing Technology, Vol. 95 (2018), S. 267-275.
DOI: 10.1007/s00170-017-1029-z -
(2018): Influence of pulsed laser ablation on the surface integrity of PCBN cutting tool materials, The International Journal of Advanced Manufacturing Technology, published online: 23 November 2018, 12 Seiten.
DOI: 10.1007/s00170-018-3032-4 -
(2018): Cutting mechanism and surface integrity in milling of Ti-5553 processed by selective laser melting†, Journal of Mechanical Science and Technology, Vol. 32 (2018) 10, S. 4883 - 4892.
-
(2018): Micro crack formation in hardmetall milling tools, International Journal of Refractory Metals & Hard Materials, 70 (2018), S. 210-214.
-
(2018): Technology-Based Recontouring of Blade Integrated Disks After Weld Repair, Journal of Engineering for Gas Turbines and Power, Vol. 140 (2018), S. 121015/1 - 121015/8.
DOI: 10.1115/1.4040738 -
(2018): Production-based design of a hybrid load introduction element for thin-walled CFRP Structures, Production Engineering Research and Development (WGP), Volume 12 (2018) Number 2, April 2018, S. 113-120.
DOI: 10.1007/s11740-018-0821-4 -
(2018): COMPUTATIONAL APPROACH TO IMPROVE BEARINGS BY RESIDUAL STRESSES BASED ON THEIR REQUIRED BEARING FATIGUE LIFE, International Journal of Computational Methods and Experimental Measurements, Vol. 6 (2018) 4, S. 656-666.
-
(2017): Effect of HM substrates’ cutting edge roundness manufactured by laser machining and micro-blasting on the coated tools’ cutting performance, CIRP Journal of Manufacturing Science and Technology, Vol. 18 (2017), S. 188 - 197.
DOI: 10.1016/j.cirpj.2017.02.003 -
(2017): Non-Destructive Determination of Residual Stress Depth Profiles of Hybrid Components by Energy Dispersive Residual Stress Measurement, Key Engineering Materials, Vol. 742 (2017), S. 613 - 620.
DOI: 10.4028/www.scientific.net/KEM.742.613 -
(2017): Sensorüberwacht in die Tiefe, WB -Werkstatt und Betrieb, 12/2017, S. 40-42.
-
(2017): Korrekte Dimensionierung der Maschine spart Kosten, mav, 11/2017, S. 34-37.
-
(2017): Automatic process parameter adaption for a hybrid workpiece during cylindrical operations , International Journal Advanced Manufacturing Technology, Published online 20 October 2017, 6 Seiten.
-
(2017): Magnetlager für Werkzeugmaschinenrundtische, antriebstechnik, 10/2017, S. 108-111.
-
(2017): Holistic process planning chain for robot machining, Production Engineering Research and Development, published online 03. November 2017, 8 Seiten.
-
(2017): MODEL BASED COMPENSATION OF GEOMETRICAL DEVIATIONS DUE TO PROCESS FORCES , Journal of Machine Engineering, Vol. 17, No. 1 (2017), S. 5 - 16.
-
(2017): Smart and energy-efficient dust suction concept for milling of fibrereinforced plastics, Production Engineering Research and Development (WGP), Volume 11 (2017) Number 6, S. 723-729.
-
(2017): Das Einzelkornschleifen - Methode zur Analyse der Einzelkornbelastung und deren Auswirkungen auf den Verschleiß beim Schleifen, wt Werkstattstechnik online, Jahrgang 107 (2017), Heft 6, S. 448 - 452.
-
(2017): Material removal and chip formation mechanisms of UHC-steel during grinding, International Journal of Advanced Manufacturing Technology, 16.03.2017, 9 S.
DOI: 10.1007/s00170-017-0270-9 -
(2017): New tool concept for grinding a plateau‑like surface for tribological applications, Production Engineering Research and Development (WGP), Juli 2017, 6 S.
DOI: 10.1007/s11740-017-0758-z -
(2017): Surface texturing of rolling elements by hard ball-end milling and burnishing, International Journal of Advanced Manufacturing Technology, 25.07.2017, 9 S.
DOI: 10.1007/s00170-017-0809-9 -
(2017): Residual stress formation after re-contouring of micro-plasma welded Ti6Al4 V parts by means of ball end milling. Eigenspannungsprofile an mikroplasmageschweißten und spanend rekonturierten Komponenten der Legierung Ti6Al4V , Mat.-wiss. u. Werkstofftech. 2017, 48, S. 1034–1039.
DOI: DOI 10.1002/mawe.2016007431034 -
(2017): Effects of an innovative deep rolling process on the subsurface properties of thin-walled components, Proceedings ICSP -13, Polytechnique Montreál, 18.09.-21.09.2017, S. 516-520.
-
(2017): Performance of a piezo-hydraulic fine positioning device: Experimental analyses with a scaled model, Production Engineering Research and Development (WGP), Juli 2017, 7 S.
DOI: 10.1007/s11740-017-0752-5 -
(2017): Optimale Prozesskettenauslegung in der additiven Fertigung, productivity 22 (2017), 2 Seiten.
-
(2017): Selbstparametrierende Prozessüberwachungssysteme. Selbstanpassende Prozessüberwachunsgsstrategien für die Serienfertigung, wt Werkstattstechnik online, 107 (2017) H. 7/8, S. 487-491.
-
(2017): Kompetenzorientierte Arbeitsplatzwechsel, ZWF, 112 (2017) 10, S. 640-643.
-
(2017): Personaleinsatz zielgerichtet planen und steuern , ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, Jahrgang 112 (2017), Ausgabe 6, S. 406 - 409.
-
(2017): Comparison of residual strength behavior after indentation, scratching and grinding of zirconia-based ceramics for medical-technical applications, Journal of the European Ceramic Society (2017), https://doi.org/10.1016/j.jeurceramsoc.2017.11.042, 9 Seiten.
-
(2017): Influence of asymmetric cutting edge roundings on surface topography, Production Engineering Research and Development (WGP), Juli 2017, 6 S.
DOI: 10.1007/s11740-017-0742-7 -
(2017): Influence of Residual Stresses Introduced by Manufacturing Processes on Bearing Endurance Time, Tribology Letters, (2017), S. 65 - 70.
DOI: 10.1007/s11249-017-0855-3 -
(2016): Geometrical Contact Zone Analysis of the Skive Hobbing Process, Advanced Materials Research, Vol. 1140 (2016), S. 157 - 164.
-
(2016): Repairing parts from nickel base material alloy by laser cladding and ball end milling, Production Engineering Research and Development (WGP), Vol. 10, Issue 4, S. 433 – 441.
DOI: 10.1007/s11740-016-0690-7 -
(2016): Markierungsfreie Bauteil-Identifikation, wt Werkstattstechnik online, Jahrgang 106 (2016), Heft 6, S. 412 - 415.
-
(2016): Sensorische Werkstücke, wt Werkstattstechnik online, Jahrgang 106 (2016), Heft 11/12, S. 815 - 820.
-
(2016): Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems, Production Engineering Research and Development (WGP), Vol. 10, Issue 4, S. 489 – 496.
DOI: 10.1007/s11740-016-0693-4 -
(2016): Nutzung von Betriebsdaten zur Produktionsplanung, wt Werkstattstechnik online, Jahrgang 106 (2016), Heft 3, S. 141 - 145.
-
(2016): Design of bronze-bonded grinding wheel properties, CIRP Annals - Manufacturing Technology, Vol. 65 (2016), S. 333 – 336.
DOI: 10.1016/j.cirp.2016.04.096 -
(2016): The effect of different manufacturing process parameters on the bond strength between Y-TZP and a veneering ceramic , Biomedical Engineering, Vol. 61 (2016), S. 184.
DOI: 10.1515/bmt-2016-5014 -
(2016): Grinding of Riblets on Curved Paths, Materials Science Forum, Vol. 874 (2016), S. 28 - 33.
DOI: 10.4028/www.scientific.net/MSF.874.28 -
(2016): Influences of grinding with Toric CBN grinding tools on surface and subsurface of 1.3344 PM steel, Journal of Materials Processing Technology, Vol. 229 (2016), S. 541 – 548.
DOI: 10.1016/j.jmatprotec.2015.09.039 -
(2016): Innovatives Zangenwalzwerkzeug, wt Werkstattstechnik online, Jahrgang 106 (2016), Heft 7/8, S. 571 - 575.
-
(2016): Internally Cooled Toric Tools for Grinding of Medical Ceramics, Advanced Materials Research, Vol. 1136 (2016), S. 678 - 683.
DOI: 10.4028/www.scientific.net/AMR.1136.678 -
(2016): A Mechanical Model of Diamond Wire Sawing of Steel Structures, Materials Science Forum, Vol. 874 (2016), S. 22 - 27.
DOI: 10.4028/www.scientific.net/MSF.874.22 -
(2016): Calculation method of the contact area in flank machining for continuous generating grinding, Applied Mathematical Modelling, Vol. 40 (2016), S. 7138 – 7146.
DOI: 10.1016/j.apm.2016.02.030 -
(2016): Thermographic online monitoring system for Automated Fiber Placement processes, Composites Part B, Vol. 97 (2016), S. 239 - 243.
DOI: 10.1016/j.compositesb.2016.04.076 -
(2016): Simulation based reduction of residual stress related part distortion, Materials Science and Engineering Technology, Vol. 47, No. 8 (2016), S. 710 - 717.
DOI: 10.1002/mawe.201600604 -
(2016): Tribological measures for controlling material flow in sheet-bulk metal forming, Production Engineering Research and Development (WGP), Vol. 10, Issue 4, S. 459 - 470.
DOI: 10.1007/s11740-016-0695-2 -
(2016): Analytical Modeling of Surface Roughness, Hardness and Residual Stress Induced by Deep Rolling, Journal of Materials Engineering and Performance, Dezember 2016, 9 S.
DOI: 10.1007/s11665-016-2486-5 -
(2016): Hybrid machining of roller bearing inner rings by hard turning and deep rolling, Journal of Materials Processing Technology, Vol. 230 (2016), S. 211 - 216.
DOI: 10.1016/j.jmatprotec.2015.11.029 -
(2016): Simulationsbasierte Bewertung von Weiterbildungen , wt Werkstattstechnik online, Jahrgang 106 (2016), Heft 4, S. 282 - 287.
-
(2016): Investigation on the Dynamic Behaviour of an Ultrasonic-Levitation Magnetic Guiding System, Advanced Materials Research, Vol. 1140 (2016), S. 377 - 383.
DOI: 10.4028/www.scientific.net/AMR.1140.377 -
(2016): Effect of PVD film’s residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools, CIRP Journal of Manufacturing Science and Technology, Dezember 2016, 7 S.
DOI: 10.1016/j.cirpj.2016.11.003 -
(2016): Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools, Production Engineering Research and Development (WGP), Vol. 10, Issue 1, S. 17 - 24.
DOI: 10.1007/s11740-015-0653-4 -
(2016): The influence of the cutting tool microgeometry on the machinability of hardened AISI 4140 steel, International Journal of Advanced Manufacturing Technology, 19.10.2016, 9 S.
DOI: 10.1007/s00170-016-9582-4 -
(2016): Influence of customized cutting edge geometries on the workpiece residual stress in hard turning, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, November 2016, 8 S.
DOI: 10.1177/0954405416685388 -
(2016): Receptance coupling based algorithm for the identification of contact parameters at holder–tool interface, CIRP Journal of Manufacturing Science and Technology, Vol. 13 (2016), S. 37 – 45.
DOI: 10.1016/j.cirpj.2016.02.005 -
(2015): The inducement of residual stress through deep rolling of AISI 1060 steel and its subsequent relaxation under cyclic loading , International Journal of Advanced Manufacturing Technology, Vol. 79, Issue 9 - 12 (2015), S. 1939 - 1947.
DOI: 10.1007/s00170-015-6946-0 -
(2015): Laser preparation of cBN inserts and its effect on tool surface integrity and tool life , DIAMANTE Applicazioni & Tecnologia, Vol. 80 (2015), S. 35 - 43.
-
(2015): Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti–6Al–4V, Production Engineering Research and Development (WGP), Vol. 10, Issue 2, S. 147 – 155.
DOI: 10.1007/s11740-015-0650-7 -
(2015): Engine blade regeneration: a literature review on common technologies in terms of machining, International Journal of Advanced Manufacturing Technology, Vol. 81, Issue 5 (2015), S. 917 - 924.
DOI: 10.1007/s00170-015-7256-2 -
(2015): Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines , International Journal of Automation Technology, Vol. 9, No. 4 (2015), S. 425 - 435.
-
(2015): Design and analysis of a 2-DOF synchronous planar drive for machine tools, Production Engineering Research and Development (WGP), Vol. 9, Issue 1 (2015), S. 125 - 132.
DOI: 10.1007/s11740-014-0582-7 -
(2015): Wear Mechanisms in Grinding of PCBN , Applied Mechanics and Materials, Vol. 806 (2015), S. 555 - 560.
DOI: 10.4028/www.scientific.net/AMM.806.555 -
(2015): Significant influence factors on the grinding tool wear and cutting mechanisms during grinding of PCBN inserts , Production Engineering Research and Development (WGP), Vol. 9, Issue 2 (2015), S. 187 - 193.
DOI: 10.1007/s11740-015-0599-6 -
(2015): Effects of alloying elements in UHC-steels and consequences for the machinability , CIRP Journal of Manufacturing Science and Technology, Vol. 10 (2015), S. 102 - 109.
DOI: 10.1016/j.cirpj.2015.04.001 -
(2015): Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steel , Production Engineering Research and Development (WGP), Vol. 9, Issue 3, S. 337 - 342.
DOI: 10.1007/s11740-015-0627-6 -
(2015): Grinding with patterned grinding wheels, CIRP Journal of Manufacturing Science and Technology, Vol. 8 (2015), S. 12 – 21.
DOI: 10.1016/j.cirpj.2014.10.005 -
(2015): Workpiece shape deviations in face milling of hybrid structures , Materials Science Forum, Vol. 825 - 826 (2015), S. 336 - 343.
DOI: 10.4028/www.scientific.net/MSF.825-826.336 -
(2015): Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings , Production Engineering Research and Development (WGP), Vol. 9, Issue 3 (2015), S. 299 - 305.
DOI: 10.1007/s11740-015-0615-x -
(2015): Chip root analyses in peripheral longitudinal up-grinding by means of a new quick-stop device, International Journal of Abrasive Technology, Vol. 7, No. 1 (2015), S. 59 - 72.
-
(2015): Energy efficient machining of Ti–6Al–4V, CIRP Annals - Manufacturing Technology, Vol. 64 (2015), S. 61 – 64.
DOI: 10.1016/j.cirp.2015.04.056 -
(2015): Strain gauge based sensing hydraulic fixtures, Mechatronics, Vol. 34 (2016), S. 111 – 118.
DOI: 10.1016/j.mechatronics.2015.05.008 -
(2015): Development of cutting edge geometries for hard milling operations, CIRP Journal of Manufacturing Science and Technology, Vol. 8 (2015), S. 43 – 52.
DOI: 10.1016/j.cirpj.2014.10.002 -
(2015): Detection of tool deflection in milling by asensory axis slide for machine tools, Mechatronics Vol. 34 (2016), S. 95 – 99.
DOI: 10.1016/j.mechatronics.2015.09.008 -
(2015): Modeling and compensation of the interactions between geometrical errors and drive currents in directly driven gantry machine Tools , Production Engineering Research and Development (WGP), Vol. 9, Issue 2 (2015), S. 257 - 267.
DOI: 10.1007/s11740-015-0600-4 -
(2015): Simulationsbasierte PPS-Optimierung für Instandhaltungsunternehmen, wt Werkstattstechnik online, Jahrgang 105 (2015), Heft 4, S. 215 - 219.
-
(2015): Correlation between friction and wear of CBN cutting tools in precision hard machining , Journal of Manufacturing Science and Engineering, Vol. 137 (2015), 19 S.
-
(2015): Analysis of Residual Stress States of Structured Surfaces Manufactured by High-Feed and Micromilling , Journal of Heat Treatment and Materials, Vol. 70, No. 4 (2015), S. 183 - 189.
DOI: 10.3139/105.110265 -
(2015): Fine Grinding of Bioceramics for Knee Implants with Elastically Bonded Abrasives: Process Modeling and Validation, Journal of Ceramic Science and Technology, Vol. 6, No. 1 (2015), S. 31 - 40.
DOI: 10.4416/JCST2014-00024 -
(2015): Differences and similarities between the induced residual stresses after ball end milling and orthogonal cutting of Ti–6Al–4V, Journal of Materials Processing Technology, Vol. 226 (2015), S. 15 - 24.
DOI: 10.1016/j.jmatprotec.2015.06.033 -
(2015): Surface topography after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling, International Journal of Advanced Manufacturing Technology, 11.11.2015, S. 1 - 18.
DOI: 10.1007/s00170-015-7885-5 -
(2015): Ultrapräzise Hochgeschwindigkeitsbearbeitung, wt Werkstattstechnik online, Jahrgang 105 (2015), Heft 7/8, S. 469 - 474.
-
(2015): Influence of cutting edge geometry on tool wear performance in interrupted hard turning , Journal of Manufacturing Processes, Vol. 19 (2015), S. 129 – 134.
DOI: 10.1016/j.jmapro.2015.06.010 -
(2014): Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel , Production Engineering Research and Development (WGP), Vol. 8, Issue 5, (2014), S. 551 - 558.
DOI: 10.1007/s11740-014-0539-x -
(2014): The influence of heat treatment and deep rolling on the mechanical properties and integrity of AISI 1060 steel, Journal of Materials Processing Technology, Vol. 214, Issue 12, (2014), S. 3020 - 3030.
DOI: 10.1016/j.jmatprotec.2014.07.013 -
(2014): The influence of deep rolling on the surface integrity of AISI 1060 high carbon steel, 2nd CIRP Conference on Surface Integrity (CSI), Procedia CIRP 13 (2014), S. 31 – 36.
DOI: 10.1016/j.procir.2014.04.006 -
(2014): Virtual process systems for part machining operations, CIRP Annals-Manufacturing Technology, 63 (2014), S. 585-605.
-
(2014): Cutting edge orthogonal contact-zone analysis using detailed tool shape representation, The International Journal of Advanced Manufacturing Technology, 2014, S. 1-10.
DOI: 10.1007/s00170-014-6230-8 -
(2014): Effect of cutting edge preparation of coated tools on their performancev in milling various materials, CIRP Journal of Manufacturing Science and Technology 7/2014, S. 264–273.
DOI: 10.1016/j.cirpj.2014.05.003 -
(2014): Residual Stress Development in Laser Machined PVD-Coated Carbide Cutting Tools, Materials Science Forum 768-769 (2014) S. 391 - 397.
DOI: 10.4028/www.scientific.net/MSF.768-769.391 -
(2014): Influence of Laser Ablation on Wear Behavior of cBN Cutting Inserts, Diamante A & T, Issue 78, Year XX, September 2014, S. 67-74.
-
(2014): Optimierung alternativer Schmiedeprozessketten, wt Werkstatttechnik online, Jahrgang 104 (2014), Heft 10, S. 691 - 695.
-
(2014): Modeling and simulation of milling processes including process damping effects, German Academic Society for Production Engineering (WGP) 2014, Published online: 13. April 2014, S. 453 - 459.
DOI: 10.1007/s11740-014-0544-0 -
(2014): Cutting edge geometries, CIRP Annals-Manufacturing Technology, 63 (2014), S. 631-653.
DOI: 10.1016/j.cirp.2014.05.009 -
(2014): Zeitkritische Fertigung individueller Implantate* - Operationsparallele Formbestimmung und Fertigung von Kniescheibenimplantaten, wt Werkstattstechnik online, Jahrgang 104 (2014) H. 9, S. 592 - 596.
-
(2014): Interpretation and optimization of material flow via System behavior reconstruction, German Academic Society for Production Engineering (WGP), Vol. 8, Issue 5, (2014), S. 659 - 668.
DOI: 10.1007/s11740-014-0545-z -
(2014): Enhanced grinding performance by means of patterned grinding wheels, The International Journal of Advanced Manufacturing Technology, Springer Verlag, Vol. 77, Issue 9 - 12 (2014), S. 1935 - 1941.
DOI: 10.1007/s00170-014-6579-8 -
(2014): Mit geschliffenen Riblets zur effizienteren Pumpe - Schleifstrategien zur Mikrostrukturierung von Pumpenlaufrädern , wt Werkstattstechnik online, Jahrgang 104, H 11/12, 2014, S. 716 - 721.
-
(2014): Interaction of load and residual stresses in sintered 1.3344 high speed steel, Advanced Materials Research Vol. 1018 (2014), S. 145 - 152.
DOI: 10.4028/www.scientific.net/AMR.1018.145 -
(2014): Evaluation of electromagnetic guides in machine tools, CIRP Annals - Manufacturing Technology 63, 2014, S. 357 – 360.
DOI: 10.1016/j.cirp.2014.03.130 -
(2014): Influence of the cutting edge preparation method on characteristics and performance of PVD coated carbide inserts in hard turning, Surface & Coatings Technology 254 (2014), S. 447–454.
DOI: 10.1016/j.surfcoat.2014.07.003 -
(2014): Chip formation and tool wear in turning of aluminum-alloyed UHC-steels, Production Engineering Research and Development (WGP), August 2014, Volume 8, Issue 4, S. 415-421.
DOI: 10.1007/s11740-013-0525-8 -
(2014): Grinding of Riblet Structures on Free Formed Compressor Blades, Advanced Materials Research Vol. 907 (2014), S. 463-473.
DOI: 10.4028/www.scientific.net/AMR.907.463 -
(2014): Kinematic analysis of the cutting speed for continuous generating grinding, Production Engineering (WGP), Vol. 9, Issue 1, (2014), S. 35 - 40.
DOI: 10.1007/s11740-014-0578-3 -
(2014): Continuous generating grinding — Material engagement in gear tooth root machining, Mechanism and Machine Theory 81 (2014), S. 11-20.
DOI: 10.1016/j.mechmachtheory.2014.06.008 -
(2014): Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end mills, Production Engineering (WGP), Vol. 8, Issue 5 (2014), S. 627 - 633.
DOI: 10.1007/s11740-014-0569-4 -
(2014): Schleifen konkaver Bauteile aus Biokeramik - Einsatzverhalten unterschiedlicher Bindungssysteme für torische Schleifstifte, wt Werkstattstechnik online 6-2014, S. 382-387.
-
(2014): Strategies for grinding of chamfers in cutting inserts, Precision Engineering 38 (2014), S. 749–758.
DOI: 10.1016/j.precisioneng.2014.04.002 -
(2014): Flexibles Polierwerkzeug zur konturtreuen Bearbeitung dentaler Werkstoffe, Bearbeitung von Kobalt-Chrom Legierungen, Flexibles Polierwerkzeug zur konturtreuen Bearbeitung dentaler Werkstoffe, Quintessenz Zahntechnik 2014 Vol. 40 Ausgabe 7, S. 876-885.
-
(2014): Dressing of vitrified bonded CBN tools for continuous generating grinding, Production Engineering Research and Development (WGP), Vol. 8, Issue 5 (2014), S. 585 - 591.
DOI: 10.1007/s11740-014-0541-3 -
(2014): Condition-based tool management for small batch production, The International Journal of Advanced Manufacturing Technology, September 2014, Volume 74, Issue 1-4, S. 471-480.
DOI: 10.1007/s00170-014-6013-2 -
(2014): Residual stresses formation after re-contouring of welded Ti-6Al-4V parts by means of 5-axis ball nose end milling , CIRP Journal of Manufacturing Science and Technology, Vol. 7, Issue 4 (2014), S. 347 - 360.
DOI: 10.1016/j.cirpj.2014.07.001 -
(2014): Monitoring of grinding wheel defects using recursive estimation, The International Journal of Advanced Manufacturing Technology (2014) 75, S. 1005–1015.
DOI: 10.1007/s00170-014-6170-3 -
(2014): Compensation of geometrical deviations via model based-observers, The International Journal of Advanced Manufacturing Technology, Volume 73, Numbers 5-8, 2014, S. 989-998.
DOI: 10.1007/s00170-014-5885-5 -
(2014): Gear profile grinding with metal bonded CBN Tools , Production Engineering Research and Development (WGP), Vol. 9, Issue 1 (2014),S. 73 - 77.
DOI: 10.1007/s11740-014-0588-1 -
(2014): Data mining approach for knowledge-based process planning, Procedia Technology 15 (2014), S. 406-415.
DOI: 10.1016/j.protcy.2014.09.095 -
(2014): Chip formation in monocrystalline iron-aluminum, CIRP Journal of Manufacturing Science and Technology, 7 (2014), S. 71–82.
DOI: 10.1016/j.cirpj.2014.01.004 -
(2014): Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminum, Production Engineering Research and Development (WGP), Vol. 8, Issue 3 (2014), S. 273 - 282.
DOI: 10.1007/s11740-013-0520-0 -
(2014): Identification of the specific cutting force for geometrically defined cutting edges and varying cutting conditions, International Journal of Machine Tools & Manufacture, 82-83 (2014), S. 42–49.
DOI: 10.1016/j.ijmachtools.2014.03.009 -
(2014): Development and first applications of gentelligent components over their lifecycle, CIRP Journal of Manufacturing Science and Technology, 7 (2014), S. 139-150.
DOI: 10.1016/j.cirpj.2013.12.006 -
(2014): Residual Stresses in Milled Beta-Annealed Ti6Al4V, Procedia CIRP, Vol. 13 (2014), S. 320 - 326.
-
(2014): Simulation of thermal and mechanical workpiece load, CIRP Journal of Manufacturing Science and Technology 7 (2014), S. 315–323.
-
(2014): Strategies for grinding of chamfers in cutting inserts, Precision Engineering, Vol. 38, Issue 4 (2014), S. 749 - 758.
DOI: 10.1016/j.precisioneng.2014.04.002 -
(2013): Abrasion Monitoring and Automatic Chatter Detection in Cylindrical Plunge Grinding, 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Procedia CIRP 8 ( 2013 ), S. 374 – 378.
DOI: 10.1016/j.procir.2013.06.119 -
(2013): A Software Architecture to Synchronize Interactivity of Concurrent Simulations in Systems Engineering, In Proceedings of the 20th ISPE International Conference on Concurrent Engineering, 2013, 10 S.
-
(2013): Application of methods for ecological optimization of crank shaft forging process, Production Engineering Research and Development (WGP), 2013, 9 S.
DOI: DOI 10.1007/s11740-013-0517-8 -
(2013): Anlernarme Prozessüberwachung. Prozessüberwachungsstrategien für die Serienfertigung auf Basis multikriterieller Sensorauswertung, wt Werkstattstechnik online, Jahrgang 103 (2013) H. 7/8, S. 631-636.
-
(2013): Surface Characterization of Components Subjected to Deep Rolling for Cyclic Loading Applications, New Production Technologies in Aerospace Industry Proceedings of the 4th Machining Innovations Conference, Hannover, September 2013, S. 47-53.
DOI: 10.1007/978-3-319-01964-2
ISBN: 978-3-319-01963-5 -
(2013): Increase of Process Stability with Innovative Spindle Drives, New Production Technologies in Aerospace Industry , Lecture Notes in Production Engineering 2014, S. 145-151.
ISBN: ISBN 978-3-319-01963-5 -
(2013): Numerical simulation of process forces during re-contouring of welded parts considering different material properties, CIRP Journal of Manufacturing Science and Technology, 6 (2013) S. 167–174.
DOI: 10.1016/j.cirpj.2013.05.001 -
(2013): Residual Stress Development in Laser Machined PVD-Coated Carbide Cutting Tools, Materials Science Forum, Vols. 768-769 (2014), S. 391-397.
DOI: 10.4028/www.scientific.net/MSF.768-769.391 -
(2013): Surface Integrity of Laser Machined Carbide Cutting Tools within the PVD-Coating Process Chain, 10th The "A" Coatings, 2013, S. 3-13.
-
(2013): Influence of shot peening and laser ablation on residual stress state an phase composition of cemented carbide cutting inserts, Int. Journal of Refractory Metals and Hard Materials 36 (2013), S. 85-89.
-
(2013): Significance of residual stress in PVD-coated carbide cutting tools, CIRP Annals - Manufacturing Technology, Volume 62 (2013), S. 67-70.
-
(2013): Competence-based process planning for the workshop production, Production Engineering, Research and Development (WGP), published online 4. March 2013, 10 S.
DOI: 10.1007/s11740-013-0453-7 -
(2013): Bauteilregeneration bei einkristalliner Gefügestruktur, wt Werkstatttechnik online, 103 (2013) H. 6, S. 476-480.
-
(2013): Adaptive Cutting Force Control with a Hybrid Axis System, Int. J. of Automation Technology, Vol.7, No.4, 2013, S. 378-384.
-
(2013): Efficient Production of CFRP Lightweight Structures on the Basis of Manufacturing Considerations at an Early Design Stage, New Production Technologies in Aerospace Industry, Lecture Notes in Production Engineering, S. 131-136.
DOI: 10.1007/978-3-319-01964-2_18 -
(2013): XY-table for desktop machine tools based on a new fluidic planar drive, Production Engineering Research and Development (WGP), Published online 17 May 2013, 5 S.
DOI: 10.1007/s11740-013-0477-z -
(2013): Influence of Laser Ablation on Wear Behavior of cBN Cutting Inserts, Euro PM2013, congress & Exhibition, Proceedings Volume 1 - Diamant Tools. S. 75-81.
-
(2013): Surface Integrity - an Inherent Load Sensor, Advanced Materials Research, Vol. 797 (2013), Trans Tech Publications, Switzerland, S. 679-684.
DOI: 10.4028/www.scientific.net/AMR.797.679 -
(2013): Modeling of workpiece shape deviations in face milling of parallel workpiece compounds, 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Procedia CIRP 8 (2013), S. 175-180.
-
(2013): Efficient Machining of Microdimples for Friction Reduction, Journal of Micro and Nano-Manufacturing, Vol. 1 (2013), Issue 1, S. 8 S.
-
(2013): Influence of 5-axes-kinematics Geometrical Accuracy in Riblet Manufacturing Processes, New Production Technologies in Aerospace Industry, Lecture Notes in Production Engineering, Proceedings of the 4th Machining Innovations Conference, September 2013, Hannover, S. 69-74.
DOI: 10.1007/978-3-319-01964-2_10 -
(2013): Product Identification by Machined Micro Patterns, Journal: Int. J. of Automation Technology Volume 7 No. 6 (2013), S. 735-741.
-
(2013): Schneidkantenpräparation im Magnetfeld, Einflussgrößen und Wirkzusammenhänge , wt Werkstattstechnik online, Jahrgang 103 (2013), H. 9, S. 721-725.
-
(2013): A roughness model for the machining of biomedical ceramics by toric grinding pins, CIRP Journal of Manufacturing Science and Technology, 6 (2013), S. 22-33.
-
(2013): Grinding of PCBN cutting inserts, International Journal of Refractory Metals and Hard Materials, Volume 42 (2014), S. 91-96.
-
(2013): Customized cutting edge preparation by means of grinding, Precision Engineering, Volume 37 (2013), S. 590-598.
-
(2013): Influence of grinding parameters on the quality of high content PCBN cutting inserts, Journal of Materials Processing Technology, Volume 214 (2014), S. 276-284.
-
(2013): Cutting edge preparation of PCBN inserts, Advanced Materials Research, Volume 797 (2013), S. 183-188.
-
(2013): Cutting edge preparation of PCBN inserts by means of grinding and its application in hard turning, CIRP Journal of Manufacturing Science and Technology, Volume 6 (2013), S. 246-253.
-
(2013): Electro-Contact Discharge Dressing of Cut-off Grinding Disks for Natural Stone Machining, Key Engineering Materials, Vol. 548 (2013), S. 90-97.
-
(2013): Dynamic scheduling of maintenance measures in complex production systems, CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 4, 2013, S. 292–300.
-
(2013): Prognose von Ausfallfolgekosten - Grundlage zur Terminierung von Instandhaltungsmaßnahmen innerhalb komplexer Produktionssysteme, wt Werstattstechinik online, Jahrgang 103 (2013) H 7/8, S. 616-621.
-
(2013): Innovative Drive Concept for Machining Robots, Procedia CIRP, 2nd CIRP Global Web Conference - Beyond modern manufacturing: Technology for the factories of the future (CIRPe2013), Volume 9, 2013, S. 67-72.
-
(2013): Design and analysis of a prototypical sensory Z-slide for machine tools, Production Engineering Research and Development (WGP), Published Online, 29.11.2012, 6 S.
DOI: 10.1007/s17740-012-0419-1 -
(2013): A novel fluid-dynamic drive principle for desktop machines, CIRP Journal of Manufacturing Science and Technolgy, Vol. 6 (2013) 2, S. 89-97.
-
(2013): Time-oriented pricing for the tool and mould manufacturing industry, Production Engineering Research and Development (WGP), 2013, 9 S.
DOI: 10.1007/s11740-013-0515-x -
(2013): Kompetenzorientierte Produktionsplanung. Simulationsbasierte Produktionsplanung unter Berücksichtigung von Mitarbeiterkompetenzen, wt Werkstattstechnik online, Jahrgang 103 (2013) H. 3, S. 216-220.
-
(2013): Development of a Concept to Optimize the Energy Efficiency in Forging Process Chains, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, Vol. 14, No. 7, July 2013, S. 1229-1236.
DOI: 10.1007/s12541-013-0167-y -
(2013): Modeling a Thermomechanical NC-Simulation, 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Procedia CIRP 8 (2013), S. 69–74.
-
(2013): Evaluation of eddy current testing for quality assurance and process monitoring of automated fiber placement, Composites: Part B 56 (2014), S. 109–116.
-
(2013): Analysis of an integrated electromagnetic actuator prototype , Innovative Klein- und Mikroantriebstechnik (GMM-FB 76), 5 S.
ISBN: ISBN 978-3-8007-3537-2 -
(2013): A model-based approach for monitoring of shape deviations in peripheral milling , International Journal of Advanced Manufacturing Technologies, Vol. 67 (2013), Iss. 9-12, Published online: 15.01.2013, S. 2537-2550.
DOI: 10.1007/s00170-012-4672-4 -
(2013): Model-based identification of tool runout in end milling and estimation of surface roughness from measured cutting forces, International Journal of Advanced Manufacturing Technology, 65, 5-8, 2013, S.1067-1080. Published online 26 May 2012, 14 S.
DOI: 10.1007/s00170-012-4240-y -
(2013): Recent Advances in Manufacturing of Riblets on Compressor Blades and Their Aerodynamic Impact, Journal of Turbomachinery, Volume 135, July 2013, 10 S.
DOI: 10.1115/1.4007590 -
(2012): On the honed cutting edge and its side effects during orthogonal turning operations of AISI1045 with coated WC-Co inserts, CIRP Journal of Manufacturing Science and Technology, Volume 5 (2012) 2, S. 108–126.
-
(2012): Standardized Communication in Simulation of Interacting Machine Tool Components, Concurrent Engineering Approaches for Sustainable Product Development in a Mulit-Disciplinary Environment, J. Stjepandic et al. (eds.), S.825-836.
-
(2012): Integrative process chain optimization using a Genetic Algorithm, Production Engineering Research and Development (WGP), Vol.6 (2012) Number 1, S. 29-37.
-
(2012): Flank milling of compliant workpieces with chamfered tool, Production Engineering Research and Development (WGP), Volume 6 (2012) Numbers 4-5, S. 403-412.
-
(2012): Condition based maintenance planning of highly productive machine tools, Production Engineering Research and Development (WGP), Volume 6 (2012) Number 3, S. 277-285.
-
(2012): Schnittstellenkonzept für virtuelle Werkzeugmaschinenmodule. Anforderungen an die Standardisierung von Kopplung und Kommunikation unterschiedlicher Teilmodelle, wt Werkstattstechnik online, 102 (2012) H. 1/2, S. 16-23.
-
(2012): Influence of shot peening and laser ablation on residual stress state and phase composition of cemented carbide cutting inserts, Int. Journal of Refractory Metals and Hard Materials, 7/2012, S. 85-89.
-
(2012): Residual Stress Distribution in PVD-Coated Carbide Cutting Tools - Origin of Cohesive Damage, Tribology in Industry, Vol. 34 (2012) No. 3, S. 158-165.
-
(2012): Process stabilization with an adaptronic spindle system, Production Engineering Research and Development (WGP), Published online 19 June 2012, DOI 10.1007/s11740-012-0397-3, 8 S.
-
(2012): Grinding of steel-ceramic-composites, Int. J. Abrasive Technology, Vol. 5, No. 2, 2012, Vol. 5 (2012) No. 2, S. 152-174.
-
(2012): Chip formation in grinding: an experimental study, Production Engineering Research and Development (WGP), Volume 6 (2012) Number 2, S. 107-115.
-
(2012): Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature, Production Engineering Research and Development, Vol. 6, Number 4-5, September 2012, S. 329-338.
-
(2012): Leistungsfähige Werkzeugkonzepte für das kontinuierliche Wälzschleifen. Verzahnungsschleifen mit keramisch gebundenen CBN-Wälzschleifwerkzeugen , wt Werkstattstechnik online, 102 (2012) H. 6, S. 377-382.
-
(2012): Model based reconstruction of milled surface topography from measured cutting forces , International Journal of Machine Tools & Manufacture, 54-55 (2012), S. 25-33.
DOI: DOI: http://dx.doi.org/10.1016/j.ijmachtools.2011.12.007 -
(2012): Adaptive process planning, Production Engineering Research an Development (WGP), Vol. 6 (2012) Number 1, S. 55-67.
-
(2012): Unternehmensbezogene Wissensaggregation zur Angebotsbestimmung, Industrie Management, 28 (2012) 3, S. 43-46.
-
(2012): Verzugsminimierung bei der Titan-Großteilefertigung. Kompensation eigenspannungsbedingter Bauteilverzüge mittels adaptivem Spannsystem und angepasster NC-Bahn, wt Werkstattstechnik online, 102 (2012) H. 9, S. 573-578.
-
(2012): Five-Axis-Grinding With Toric Tools: A Status Review, Journal of Manufacturing Science and Engineering, October 2012, Vol. 134, 6 S.
-
(2012): Model-based identification of tool runout in end milling and estimation of surface roughness from measured cutting forces, International Journal of Advanced Manufacturing Technology, Published online 26 May 2012, DOI 10.1007/s00170-012-4240-y, 14 Seiten.
-
(2012): Messtechnische Analyse formflexibler Spannmethoden. Experimenteller Vergleich verschiedener Spanntechniken, wt Werkstatttechnik online, 102 (2012) H. 11/12, S. 795-800.
-
(2012): Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealing, Production Engineering Research and Development (WGP), Vol. 6 (2012) Number 2, S. 213-218.
-
(2012): High speed process damping in milling, CIRP Journal of Manufacturing Science and Technology, 5 (2012), S. 8-19.
-
(2011): Identification of weak spots in the metrological investigation of dynamic machine behaviour, Production Engineering, Research and Development, Volume 5 (2011) Number 6, S. 679-689.
-
(2011): Integrative process chain optimization using a Genetic Algorithm., Production Engineering Research and Development (WGP), Published online 21. September, 9 Seiten.
-
(2011): Dynamic analysis of a motor-integrated method for a higher milling stability., Production Engineering Research and Development (WGP), Vol. 5 (2011) Number 6, S. 691-699.
-
(2011): Automatisiertes Entgraten mit Industrierobotern - durchgängige CAx-Prozesskette. Mit der highFlex-Technologie von der Konstruktion bis zum Fertigteil., wt Werkstattstechnik online, 101 (2011) H. 9, S. 623-628.
-
(2011): Kinematic and Stochastic Surface Topography of Machined TiAl6V4-Parts by means of Ball Nose End Milling., 1st CIRP Conference on Surface Integrity (CSI), Procedia Engineering, 19 (2011), S. 81-87.
DOI: 10.1016/j.proeng.2011.11.083 -
(2011): Lean Production von Flugzeugstrukturbauteilen mit Unterstützung der Digitalen Fabrik. Implementierung modularer Ladungsträger beim EADS-Tochterkonzern Premium Aerotec., wt Werkstattstechnik online, 101 (2011) H. 3, S. 105-109.
-
(2011): Simulation-based dimensioning of manufacturing process chains., CIRP Journal of Manufacturing Science and Technology, 4 (2011), S. 9-14.
-
(2011): Industrieroboter für spanende Bearbeitungen., wt Werkstattstechnik online, 101 (2011) H. 9, S. 617-622.
-
(2011): Adaptronic Systems in Robot Manufacturing, Advanced Materials Research, Vols. 383-390 (2012), Seite 1013-1018.
DOI: 10.4028/www.scientific.net/AMR.383-390.1013 -
(2011): Schleifen keramischer Verschleißschutzsysteme, dihw- Diamant Hochleistungswerkzeuge, 3 (2011) 2, S. 34-43.
-
(2011): Elementary studies on the inducement and relaxation of residual stress, Procedia Engineering, 19 (2011), 1st CIRP Conference on Surface Integrity (CSI), January 30 – February 1, 2012, Bremen, S. 88-93.
-
(2011): Grinding of Steel-Ceramic-Composites., Advanced Materials Research, Vol. 325 (2011), S. 116-121.
-
(2011): Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning., International Journal of Automation Technology, Vol. 5 (2011) No. 3, S. 353-361.
-
(2011): Machining of reinforced concrete using grinding wheels with defined grain pattern., International Journal of Abrasive technology, Vol. 4 (2011) No. 2, S. 101-116.
-
(2011): Stahlbetonbearbeitung mit gesetzten Trennschleifwerkzeugen. Ritzuntersuchungen zu Materialtrennmechanismen. , wt Werkstattstechnik online, 101 (2011) H. 6, S. 398-406.
-
(2011): Topography prediction of resilient parts after flank milling with chamfered tools., Production Engineering Research and Development (WGP), Vol. 5 (2011) Number 3, S. 273-281.
-
(2011): Adaptive process planning., Production Engineering Research and Development (WGP), Published online 02 December, 14 Seiten.
-
(2011): Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load., CIRP Annals - Manufacturing Technology, Vol. 60 (2011) I, S. 73-76.
-
(2011): Adaptive Dämpfung für ruckentkoppelte Antriebe. Rückspeisefähige magnetische Dämpfungseinheit für ruckentkoppelte Vorschubachsen., wt Werkstattstechnik online, 101 (2011) H. 5, S. 321-327.
-
(2011): CAD-based cost calculation of mould cavities., Production Engineering Research and Development (WGP), Volume 5 (2011) Number 1, S. 73-79.
-
(2011): Linking total costs and benefits of ownership (TCBO) and process chain simulation for integrated assessment of manufacturing technologies and processes., Production Engineering Research and Development (WGP), Vol. 5 (2011) Number 5, S. 557-564.
-
(2011): Assessing mould costs analysing manufacturing processes of cavities, International Journal of Advanced Manufacturing Technology, Vol. 56 (2011) Numbers 9-12, S. 943-949.
-
(2011): Optimizing the order processing of customized products using product configuration., Production Engineering, Research and Development (WGP), Volume 5 (2011) Number 6, S. 595-604.
-
(2011): Velocity effects in metal forming and machining processes., CIRP Annals - Manufacturing Technology, Vol. 60 (2011) I, S. 627-650.
-
(2011): Stable islands in the stability chart of milling processes due to unequal tooth pitch, International Journal of Machine Tools & Manufacture, 51 (2011), S. 152-164.
-
(2011): Biomechanical characterisation of a degradable magnesium-based (MgCa0.8) screw, Journal of Materials Science: Materials in Medicine, Official Journal of the European Society for Biomaterials, Published online 31. December 2011, DOI 10.1007/s10856-011-4544-8, 7 Seiten.
-
(2011): Wärmearmes Fügen von segmentierten Werkzeugen mit Hilfe der Klebetechnik., HTM J. Heat. Treatm. Mat. 66 (2011) 1, S. 1-8.
-
(2010): Investigation on the Dynamics of Tool Grinding, Machine Dynamics Problems, Volume 33, No 2, S. 92-104.
-
(2010): Evolutionäre Optimierung einer Schmiedeprozesskette., wt Werkstattstechnik online, 100 (2010) H. 10, S. 798-803.
-
(2010): Simulationsbasierte Instandhaltung. Optimierung der Instandhaltungsplanung und -steuerung mit Hilfe ereignisorientierter Simulation. , wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 598-603.
-
(2010): Development of Combined Manufacturing Technologies for High-Strength Structural Components., Advanced Materials Research, Vol. 137 (2010), S. 219-246.
-
(2010): Contact conditions in 5-axis-grinding of double curved surfaces with toric grinding wheels., Advanced Materials Research, Vols. 126-128 (2010), S. 41-46.
-
(2010): Großflächiges Schleifen von Mikrostrukturen., wt Werkstattstechnik online, 100 (2010) H. 6, S. 487-493.
-
(2010): Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature., Production Engineering Research and Development (WGP), Volume 4 (2010) Number 5, S. 457-464.
-
(2010): Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature., Production Engineering Research and Development (WGP), Volume 4 (2010) Number 5, S. 457-464.
-
(2010): Process Influences in the Wire Cutting of Concrete., Advanced Materials Research, Vols. 126-128 (2010), S. 70-76.
-
(2010): Prediction of contact conditions and theoretical roughness in manufacturing of complex implants by toric grinding tools., International Journal of Machine Tools & Manufacture, Vol. 50 (2010) Issue 7, S. 630-636.
-
(2010): Softwareunterstützung zur Erstellung integrativer Roadmaps. Synchronisation von Fabrik-, Technologie- und Produktplanung., wt Werkstattstechnik online, 100 (2010) H. 4, S. 226-233.
-
(2010): Technologieplanung und -bewertung mittels Prozesskettensimulation. Total Cost and Benefit of Ownership innerhalb der Produktion der Premium Aerotec GmbH. , wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 638-643.
-
(2010): Residual Stress in PVD-Coated Carbide Cutting Inserts - Applications of the sin2psi and the Scattering Vector Method. , Materials Science Forum, Vols. 638-642, S. 2383-2388.
-
(2010): Genetics and intelligence: new approaches in production engineering., Production Engineering Research and Development (WGP), Volume 4 (2010) Number 1, S. 65-73.
-
(2010): Model-based Framework for dimensioning multistage grinding processes, Innovative Production Machines and Systems, S. 272-273.
-
(2010): "Durchgängiges Datenmanagement System" für die Instandsetzung von Triebwerkskomponenten., wt Werkstattstechnik online, 100 (2010) H. 3, S. 169-174.
-
(2010): Advanced microstructures and its production through cutting and grinding., CIRP Annals - Manufacturing Technology, 59 (2010) 1, S. 67-72.
-
(2010): Ductile and brittle material removal mechanisms in natural nacre - A model for novel implant materials., Journal of Materials Processing Technology, 210 (2010), S. 1827-1837.
-
(2010): Schleifen funktionalisierter Oberflächen., wt Werkstattstechnik online, 100 (2010) H. 11/12, S. 826-831.
-
(2010): Consideration of the Form of the Undeformed Section of Cut in the Calculation of Machining Forces., Machining Science and Technology, 14 /2010, S. 455-470.
-
(2010): Virtual Prototyping in Werkzeug- und Formenbau. Optimierungspotenziale identifizieren und Zielkonflikte visualisieren., wt Werkstattstechnik online, 100 (2010) H. 7/8, S. 612-616.
-
(2010): Optical Quality Control of High-Strength Structures., Advanced Materials Research, Vol. 137 (2010), S. 295-316.
-
(2010): Hochdynamische ruckentkoppelte Werkzeugmaschine. Prototyp einer hochdynamischen Werkzeugmaschine mit innovativer Ruckentkopplungstechnologie., wt Werkstattstechnik online, 100 (2010) H. 1/2, S. 99-104.
-
(2010): Experimental investigation and modeling of thermal and mechanical influences on shape deviations in machining structural parts., International Journal of Machine Tools & Manufacture, Vol. 50 (2010) Issue 11, S. 1015-1021.
-
(2010): Planung und Bewertung von Druckgussformen. Integration technologischer, prozess- und organisationsbezogener Aspekte in die Investitionsplanung und Bewertung. , wt Werkstattstechnik online, 100 (2010) H. 4, S. 298-303.
-
(2010): Mechanical characterization of nacre as an ideal-model for innovative new endoprosthesis materials. , Archives of Orthopaedic and Trauma Surgery, online erschienen auf www. springerlink.com, 6 Seiten.
-
(2010): A rolling-gliding wear simulator for the investigation of tribological material pairings for application in total knee arthroplasty., BioMedical Engineering OnLine 2010, www.biomedical-engineering-online.com/content/9/1/24, 22 Seiten.
-
(2009): Modelling and simulation of process: machine interaction in grinding., Production Engineering Research and Development (WGP), Volume 3 (2009) Number 1, S. 111-120.
-
(2009): Manufacturing of Reinforced High Precision Forging Dies. , steel research international, 80 (2009) No. 12, S. 878-884.
-
(2009): Prozesskettenauslegung mittels genetischer Algorithmen., wt Werkstattstechnik online, 99 (2009) H. 10, S. 768-772.
-
(2009): Investigation on the Dynamics of Tool Grinding., Machine Dynamics Problems, Vol. 33 (2009) No. 2, S. 92-104.
-
(2009): Den Maschinenzustand im Fokus. Instandhaltung von Werkzeugmaschinen unter Verwendung von Zustandsüberwachungssystemen., wt Werkstattstechnik online, 99 (2009) H. 7/8, S. 470-478.
-
(2009): Thin tools for the high speed cutting of granite. , International Journal of Abrasive Technology, Volume 2 (2009) No. 2, S. 173-183.
-
(2009): Manufacturing of functional microstructured surfaces by grinding with vitrified SiC- and cBN-wheels., International Journal of Abrasive Technology, Vol. 2 (2009) No. 2, S. 207-222.
-
(2009): Automatisierte Kalkulation konturgebender Formbereiche. Zugänglichkeitsanalyse der Kavitätsgeometrie zur geometriebasierten Arbeitsplanung und Kostenprognose., wt Werkstattstechnik online, 99 (2009) H. 5, S. 343-349.
-
(2009): Cutting Edge Preparation for Cemented Carbide Milling Tools., Advanced Materials Research, Vols. 76-78, S. 597-602.
-
(2009): Größeneinflüsse der Werkzeuggeometrie auf die Spanbildung und Prozessgrößen bei der Hart- und Weichbearbeitung., HTM, 64 (2009) 1, S. 7-14.
-
(2009): Vorhersage der Randzoneneigenschaften hart gedrehter Stähle., HTM - Journal of Heat Treatment and Materials, 64 (2009) 2, S. 94-100.
-
(2009): Characteristic values for continuous-generating grinding of gears., Transactions of the North American Manufacturing Research Institution of SME, Vol. 37 (2009), S. 121-128.
-
(2009): Development in the Dressing of Super Abrasive Grinding Wheels., Key Engineering Materials, Vol. 404 (2009), S. 1-10.
-
(2009): Grinding of microstructured functional surfaces: a novel strategy for dressing of microprofiles. , Production Engineering Research and Development (WGP), Volume 3 (2009) Number 1, S. 41-48.
-
(2009): Lebenszykluskostenkalkulation von Hubschraubertriebwerken. Entwicklung eines Prognosewerkzeugs für die MTU Aero Engines GmbH., wt Werkstattstechnik online, 99 (2009) H. 7/8, S. 564-569.
-
(2009): 5-DOF harmonic frequency control using contactless magnetic guides., CIRP Journal of Manufacturing Science and Technology, Vol. 2 (2009) 1, S. 21-28.
-
(2009): Energy optimized jerk-decoupling technology for translatory feed axes., CIRP Annals - Manufacturing Technology, Vol. 58 (2009) 1, S. 339-342.
-
(2009): Rule based quotation costing of pressure die casting moulds., Production Engineering Research and Development (WGP), Volume 3 (2009) Number 1, S. 87-94.
-
(2009): An approach to reduce the influence of tool wear on workpiece properties during hard turning., International Journal Microstructure and Materials Properties, Vol. 4 (2009) Nos. 5/6, S. 605-614.
-
(2009): Sensitivitätsanalyse für ein Simulationsmodell. Untersuchung des Einflusses der Randbedingungen auf ein thermisches Maschinenmodell., wt Werkstattstechnik online, 99 (2009) H. 5, S. 294-299.
-
(2009): Diamond tools for the grinding of complex ceramic implant surfaces., Advanced Materials Research, Vols. 76-78, S. 33-37.
-
(2009): Airborne sound emission as a process monitoring tool in the cut-off grinding of concrete., Online erschienen am 11. August 2009, unter www.elsevier.com/locate/apacoust. Erscheint in Applied Acoustics, 71 (2010), S. 52-60.
-
(2008): Machining induced residual stress in structural aluminum parts. , Production Engineering Research and Development (WGP), Volume 2 (2008) Number 3, S. 247-253.
-
(2008): Beeinflussbarkeit der Bauteilgestalt durch Prozessstellgrößen beim Außenlängsdrehen von AlSi9Cu3 - GJS400 Parallelverbunden., Materialwissenschaft und Werkstofftechnik, 39 (2008) No. 9, S. 604-609.
-
(2008): Helical milling of CRFP-titanium layer compounds., CIRP Journal of Manufacturing Science and Technology, Volume 1/2 (2008), S. 64-69.
-
(2008): Tool behavior at alternating thermo-mechanical loads during milling of compounds out of aluminum and spheroidal cast iron., Production Engineering Research and Development (WGP), Volume 2 (2008) Number 4, S. 351-356.
-
(2008): Microstructuring of functional surfaces by means of cutting processes., Production Engineering Research and Development (WGP), Volume 2 (2008) Number 1, S. 21-25.
-
(2008): Sonic analysis in cut-off grinding of concrete., Production Engineering Research and Development (WGP), Volume 2 (2008) Number 2, S. 209-218.
-
(2008): Reduction of wear induced surface zone effects during hard turning by means of new tool geometries., Production Engineering Research and Development (WGP), Volume 2 (2008) Number 2, S. 123-132.
-
(2008): In-process information storage on surfaces by turning operations., CIRP Annals - Manufacturing Technology, Vol. 57 (2008) 1, S. 85-88.
-
(2008): Active linear guidances for micro actuators: alternative concepts and first prototypes. , Microsystem Technologies, Vol. 14 (2008) No. 12, S. 1961-1973.
-
(2008): Seilsägen in Drehmaschinen., wt Werkstattstechnik online, 98 (2008) H. 9, S. 723-726.
-
(2008): Kinematik und Spannungsformen beim Zirkularfräsen., Materialwissenschaft und Werkstofftechnik, 39 (2008) No. 9, S. 610-615.
-
(2008): Milling induced residual stresses in structural parts out of forged aluminium alloys. , International Journal Machining and Machinability of Materials, Vol. 4 (2008) No. 4, S. 335-344.
-
(2008): Mikrostrukturierung funktionaler Oberflächen. Auslegung, Fertigung und Charakterisierung von Mikrostrukturen zur tribologischen Funktionalisierung von Oberflächen., wt Werkstattstechnik online, 98 (2008) H. 6, S. 486-494.
-
(2008): Wegsensoren für aktive Mikrolinearführungen., wt Werkstattstechnik online, 98 (2008) H. 11/12, S. 933-937.
-
(2008): Stufenloses Schleifen von Materialverbunden. Modellentwicklung zur Erklärung des Stufenabsatzes beim Schleifen von Materialübergängen., wt werkstattstechnik online, 98 (2008) H. 6, S. 437-445.
-
(2008): Rule-based quotation costing of pressure die casting moulds., Production Engineering Research and Development (WGP), Online-Ausgabe, 8 Seiten.
-
(2008): Design of dynamic multi sensor systems. , Production Engineering Research and Development (WGP), Volume 2 (2008) Number 3, S. 327-331.
-
(2008): Machining ceramic surfaces with adaptable diamond tools for complex implants. , Industrial Diamond Review (IDR), Ausgabe 2/08, S. 20-22.
-
(2008): Virtuelle Nullserienfertigung in der Planung. Ein neuartiger Ansatz zur simulationsgestützten Planung und Überwachung spanender Fertigungsprozesse., wt Werkstattstechnik online, 98 (2008) H. 3, S. 149-155.
-
(2008): Geometriebasierte Angebotskalkulation. Regelbasierte Verarbeitung der Gussteilgeometrie zur verursachungsgerechten Kalkulation von Druckgussformen., wt Werkstattstechnik online, 98 (2008) H. 11/12, S. 903-908.
-
(2008): Computer-aided analysis of flow-characteristics of a micro-positioning system., Production Engineering Research and Development (WGP), Volume 2 (2008) Number 2, S. 185-191.
-
(2008): Sichere Antriebsfunktionen für Roboter - Safety Inside., wt Werkstattstechnik online, 98 (2008) H. 9, S. 745-751.
-
(2007): Three-dimensional optical Measurement with locally Adapted Projection., Advanced Materials Research, Vol. 22 (2007), S. 83-90, 2007.
-
(2007): Material specific definition of the high speed cutting range., International Journal Machining and Machinability of Materials, Vol. 2 (2007) No. 2, S. 176-185, 2007.
-
(2007): Total Benefits of Ownership. Verfahren zur Bewertung des Unternehmensnutzens von Investitionsalternativen. , wt Werkstattstechnik online, 97 (2007) H. 7/8, S. 560-566, 2007.
-
(2007): Bearbeitungs- und Montagekonzept für Schuhleisten. Auf dem Weg zur vollautomatisierten Fertigung individueller Schuhleisten., wt Werkstattstechnik online, 97 (2007) H. 9, S. 651-656, 2007.
-
(2007): Ultraschallschleifen dünnwandiger Bauteile., wt werkstattstechnik online, 97 (2007) H. 11/12, S. 862-867, 2007.
-
(2007): Auswirkungen schwingungsfähiger Maschinenstrukturen. Die Ruckentkopplung -ein möglicher Ersatz aufwändiger Gestellkomponenten. , Antriebstechnik, 9/2007, S. 58-61, 2007.
-
(2007): Entwicklung und Fertigung eines aerostatischen Mikrolagers mit mehreren Düsen. , wt Werkstattstechnik online, 97 (2007) H. 3, S. 120-125, 2007.
-
(2007): Feinpositionierspannfutter mit vier Freiheitsgraden. Anforderungen, Konstruktion und Optimierung. , wt Werkstattstechnik online, 97 (2007) H. 11/12, S. 890-894, 2007.
-
(2007): Biocompatible Magnesium Alloys as Absorbable Implant Materials - Adjusted Surface and Subsurface Properties by Machining Processes., Annals of the CIRP, Vol. 56 (2007) 1, S. 113-116, 2007.
-
(2007): Präzision im Kleinformat. Konzeption eines piezohydraulischen Servo-Mikrostellsystems., wt werkstattstechnik online, 97 (2007) H. 3, S. 115-119, 2007.
-
(2007): Auslegung von ruckentkoppelten Vorschubachsen. Regelungstechnische und energetische Optimierung der Koppelelemente., wt Werkstattstechnik online, 97 (2007) H. 7/8, S. 485-490, 2007.
-
(2007): Energy flow in jerk-decoupled translatory feed axes., Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Volume 221 (2007) Nr. 1, S. 89-98, 2007.
-
(2007): Mechanical information storage by use of an excited turning tool. , Production Engineering Research and Development, Vol. 1 (2007) Nr. 1, S. 25-30, 2007.
-
(2007): Influence of the cutting tool characteristic on the machining process during high speed milling of aluminum alloys., Steel Grips, 5 (2007) No. 6, S. 457-460, 2007.
-
(2007): Dressing of filigree fine-grained metal bonded grinding wheels. , Production Engineering Research and Development (WGP), Volume 1 (2007) Number 3, S. 239-243, 2007.
-
(2007): Grinding of Ceramic Steel Compounds., CIRP Journal of Manufacturing Systems, Vol. 36 (2007) No. 5, S. 453-457, 2007.
-
(2007): Kompensation thermischer Verlagerungen. , wt Werkstattstechnik online, 97 (2007) H. 11/12, S. 913-917, 2007.
-
(2007): Knowledge Management in Process Planning. , Annals of the CIRP, Vol. 56 (2007) 1, S. 175-180, 2007.
-
(2007): Schwingungsregelung einer adaptronischen Frässpindel mit Piezoaktoren., wt Werkstattstechnik online, 97 (2007) H. 11/12, S. 895-900, 2007.
-
(2007): Mechatronic Systems for Machine Tools, Annals of the CIRP, Vol. 56 (2007) 2, S. 657-686, 2007.
-
(2006): Influence of Cutting and Non-Cutting Processes on the Corrosion Behavior and the Mechanical Properties of Magnesium Alloys., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) No.1, S. 1-4.
-
(2006): Influence of Material Models Used in Finite Element Modeling on Predicted Scaling Effects in Machining., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) No.1, S. 103-108.
-
(2006): VR-Unterstützung für die NC-Programmierung fünfachsiger Fräsprozesse., wt Werkstattstechnik online, 96 (2006) H. 1/2, S. 47-51.
-
(2006): Lebenszyklus-orientierte Werkzeugmaschinenentwicklung. Wie Lebenszykluskosten schon bei der Maschinenentwicklung berücksichtigt und gesenkt werden können., wt Werkstattstechnik online, 96 (2006) H. 7/8, S. 441-446.
-
(2006): Model-based control of a hexapod with linear direct drives., International Journal of Computer Integrated Manufacturing, Vol. 19 (2006) No. 15, S. 463-472.
-
(2006): In-Prozess-Überwachung des Rundheitsfehlers beim bahngesteuerten Kurbelwellenschleifen. Kontinuierliche Beobachtung des Rundheitsfehlers mit Hilfe berührungsloser Acoustic-Emission-Sensoren., wt Werkstattstechnik online, 96 (2006) H. 6, S. 377-383.
-
(2006): Strategies for Optimised Digitizing of Freeform Surfaces with Machine Tools., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) 1, S. 127-130.
-
(2006): Energiebetrachtung ruckentkoppelter Vorschubachsen. Simulative Untersuchungen des Energieflusses ruckentkoppelter Vorschubachsen., wt Werkstattstechnik online, 96 (2006) H. 5, S. 266-270.
-
(2006): Prozessstabilität einer piezoaktorisch gelagerten Frässpindel. Stabilitäts- und Energieberechnungen bei aktiver Zustandsregelung., wt Werkstattstechnik online, 96 (2006) H. 9, S. 669-675.
-
(2006): Machining of Pemanent and Bioresorbable Implants Made of Ceramics and Magnesium., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) 1, S. 13-18.
-
(2006): Improvement of the surface layer characteristics of 42CrMo4 by deep rolling with ceramic or cemented carbide balls., Journal of Steel and Related Materials, Steel Grips, 4 (2006) No. 3, S. 198-200.
-
(2006): Wear Behavior of Vitrified Bonded Grinding Wheels during Ceramic Steel Compound Machining., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) 2, S. 67-70.
-
(2006): Ausbildung der Schnittkräfte bei unterschiedlichen Spanungsquerschnitten. Einfluss der im Eingriff befindlichen Schneidkante beim Orthogonaldrehen auf die Schnittkraft., wt Werkstattstechnik online, 96 (2006) H. 11/12, S. 805-809.
-
(2006): Spanen von Eisen-Aluminium-Legierungen. Tribochemische Verschleißmechanismen beim Drehen intermetallischer Eisen-Aluminium-Legierungen., wt Werkstattstechnik online, 96 (2006) H. 11/12, S. 798-804.
-
(2006): Mechanisms of Tool Wear in Turning FeAl-Based Intermetallic Alloys., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) 2, S. 51-54.
-
(2006): Manufacturing of Microfunctional Structures by Grinding., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) 1, S. 31-34.
-
(2006): Fertigung mikrofunktionaler Riblet-Strukturen durch Schleifen., wt Werkstattstechnik online, 96 (2006) H. 6, S. 353-358.
-
(2006): Methodology for Dimensioning Technological Interfaces of Manufacturing Process Chains., Annals of the CIRP, Vol. 55 (2006) 1, S. 497-500.
-
(2006): Wechselwirkungen zwischen Struktur und Prozess beim Werkzeugschleifen. Simulation des Materialabtrags und der Werkstückabdrängung., wt Werkstattstechnik online, 96 (2006) H. 11/12, S. 814-819.
-
(2006): A flexible force model for predicting cutting forces in end milling., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) 2, S. 15-20.
-
(2006): Advanced NC-Simulation based on the Dexelmodel and the HRMC-Algorithm., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) No. 1, S. 91-94.
-
(2006): Workpiece and Tool Handling in Metal Cutting Machines., Annals of the CIRP, Vol. 55 (2006) 2, S. 1-23.
-
(2006): Kürzere Prozessketten durch Feinpositioniersysteme. Ein innovativer Lösungsansatz zur Substitution des Auswuchtens von Kurbelwellen., wt Werkstattstechnik online, 96 (2006) H. 5, S. 252-256.
-
(2005): Process Development in Grinding of Ceramic Steel Compounds., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XII (2005) Ausgabe 1, S. 41-44.
-
(2005): Availability Based Planning and Improvement of Complex Manufacturing Plants., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XII (2005) No. 2, S. 143-148.
-
(2005): Modeling and Calibration Process of Mechatronical Machine Tool Models., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XII (2005) Ausgabe 1, S. 105-110.
-
(2005): Dressing of Vitreous Bonded Worms for Gear Grinding by Form Rollers., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XII (2005) Ausgabe 2, S. 19-22.
-
(2005): A Concept for Shoe Last Manufacturing in Mass Customisation., Annals of the CIRP, Vol. 54 (2005) 1, S. 341-344.
-
(2005): Material Parameter Determination for Turning Process Simulation., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XII (2005) No. 1, S. 11-14.
-
(2005): Flexible Process Chains by Template Based Configuration., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XII (2005) Ausgabe 2, S. 81-84.
-
(2004): Micromagnetic Material Characterization of Thin Steel Sheet., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) No. 2, S. 43-46.
-
(2004): Examination of Basic Separation Mechanisms for Machining Concrete and Stone., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) Vol. 2, S. 23-28.
-
(2004): Effects of a Preload Control Unit on Machine Tool Spindles., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) No. 2, S. 175-178.
-
(2004): State Control through Linearization of the Linear Direct Driven Parallel Kinematics PaLiDA., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) No. 2, S. 189-194.
-
(2004): Model Based Wear Detection of a Ball Screw Spindle., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) No. 1, S. 91-94.
-
(2004): Machine Tool with Active Magnetic Guides., Annals of the CIRP, Vol. 53 (2004) Ausgabe 1, S. 333-336.
-
(2004): High Performance Cutting of Aerospace-Materials., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) No. 1, S. 15-20.
-
(2004): An Aerostatic Linear Guidance for Microsystems., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) No. 2, S. 203-208.
-
(2004): Influence of High Speed Cutting on the Formation of Residual Stresses., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XI (2004) No. 2, S. 9-12.
-
(2003): Advancing Cutting Technology., Annals of the CIRP, Vol. 52 (2003) 2, S.1-20.
-
(2003): Potentials of Different Process Kinematics in Micro Grinding., Annals of the CIRP, Vol. 52 (2003) 1, S. 463-466.
-
(2003): Modeling and Process Design for Different Grinding Operations of Carbide Tools. , Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. X (2003) 1, S. 15-18.
-
(2003): Application of Intelligent Agents for Concurrent Process Planning and Production Control. , Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. X (2003) 2, S. 81-86.
-
(2003): Grinding of a Ceramic Steel Compound., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. X (2003) No. 1, S. 1-4.
-
(2002): Fast Inspection of Larger Sized Curved Surfaces by Stripe Projection., Annals of the CIRP, Vol. 51 (2002) Ausgabe 1, S. 499-502.
-
(2002): Automated Finishing of Dies and Molds. , Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. IX (2002) Ausgabe 2, S. 1-4.
-
(2002): Development of Advanced Tools for Economic and Ecological Grinding of Granite. , Annals of the German Academic Society for Production Engineering (WGP) Production Engineering, Vol. IX (2002) Ausgabe 2, S. 29-34.
-
(2002): Concepts for Coolant Reduction in Grinding Applications., Annals of the German Academic Society for Production Engineering (WGP) Production Engineering, Vol. IX (2002) Ausgabe 1, S. 25-28.
-
(2002): Technological Interfaces of Industrial Process Chains., Annals of the German Academic Society for Production Engineering (WGP) Production Engineering, Vol. IX (2002) Ausgabe 2, S. 43-46.
-
(2002): Piezoelectric Actuator Based Preload Control Unit for Machine Tool Spindles. , Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. IX (2002) Ausgabe 1, S. 117-122.
-
(2002): Intelligent Fixtures in Manufacturing Systems., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. IX (2002) Ausgabe 1, S. 139-142.
Beiträge in Büchern (reviewed)
-
(2021): Electromagnetic Ultra-Precision Linear Guide, Ultra-precision High Performance Cutting (2021), Lecture Notes in Production Engineering, Report of DFG Research Unit FOR 1845, S. 75-106.
DOI: https://doi.org/10.1007/978-3-030-83765-5_4
ISBN: 978-3-030-83764-8 -
(2021): Ultra Precision High Performance Axis Control, Ultra-precision High Performance Cutting (2021), Lecture Notes in Production Engineering, Report of DFG Research Unit FOR 1845, S. 147-170.
DOI: https://doi.org/10.1007/978-3-030-83765-5_6
ISBN: 978-3-030-83764-8 -
(2020): Optimierung des Sinterprozesses bronzegebundener Diamantschleifscheiben, Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 69. Ausgabe, Vulkan Verlag, S. 42-51.
ISBN: 978-3-8027-3133-4 -
(2020): Schleifen mit mikrostrukturierten konventionellen Profilschleifscheiben, Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 69. Ausgabe, Vulkan Verlag, S. 111-125.
ISBN: 978-3-8027-3133-4 -
(2020): Trockenes Seilschleifen von Stahl mittels innovativer Schleifwerkzeugkonzepte, Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 69. Ausgabe, Vulkan Verlag, S. 75-88.
ISBN: 978-3-8027-3133-4 -
(2017): Feeling machine, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle. Genetics and Intelligence - Keys to Industry 4.0, edited by Denkena, B., Mörke, T., S. 308-315.
-
(2017): Online monitoring and control of tool deflection in milling, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle. Genetics and Intelligence - Keys to Industry 4.0, edited by Denkena, B., Mörke, T., S. 368-378.
-
(2017): Das gentelligente Werkstück, Handbuch Industrie 4.0 - Geschäftsmodelle, Prozesse, Technik, 1. Ausgabe, Hanser Verlag, S. 295 - 321.
ISBN: 978-3-446-44642-7 -
(2017): Adaptive process planning and control, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, Elsevier Fachverlag, S. 281 - 292.
ISBN: 978-0-12-811939-6 -
(2017): Fluid Dynamic Drive Module for Planar Motion in Three Degrees of Freedom, Small Machine Tools for Small Workpieces, Hrsg.v. J.P. Wulfsberg und A. Sanders, ISBN 978-3-319-49269-8_9, S. 131-143.
-
(2017): Sensory workpieces, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle. Genetics and Intelligence - Keys to Industry 4.0, edited by Denkena, B., Mörke, T., S. 316-331.
-
(2017): Teachless process monitoring for single item production, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle. Genetics and Intelligence - Keys to Industry 4.0, edited by Denkena, B., Mörke, T., S. 353-367.
-
(2017): Process-integrated quality monitoring , Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, Elsevier Fachverlag, S. 293 - 298.
ISBN: 978-0-12-811939-6 -
(2017): Process planning with self-learning process models , Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, Elsevier Fachverlag, S. 299 - 306.
ISBN: 978-0-12-811939-6 -
(2016): Schleifen dreidimensionaler Mikrostrukturen , Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 67. Ausgabe, Vulkan Verlag, S. 168 - 179.
ISBN: 978-3-8027-2984-3 -
(2016): Schleifen von Schneidkantenverrundungen an PCBN-Wendeschneidplatten, Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 67. Ausgabe, Vulkan Verlag, S. 91 - 101.
ISBN: 978-3-8027-2984-3 -
(2015): Material, welding- and conditioning technology at the deep drilling, Final Report of Geothermal Energy and High-Performance Drilling Collaborative Research Program (gebo), Band 30, Schriftenreihe des Energie-Forschungszentrums Niedersachsen, Cuvillier Verlag Göttingen, S. 623 - 660.
ISBN: 978-3-736-99080-7 -
(2015): Design of Folded Tubulars for Casing Applications , Final Report of Geothermal Energy and High-Performance Drilling Collaborative Research Program (gebo), Band 30, Schriftenreihe des Energie-Forschungszentrums Niedersachsen, Cuvillier Verlag Göttingen, S. 661 - 686.
-
(2014): Surface Characterization of Components Subjected to Deep Rolling for Cyclic Loading Applications, Denkena, B., ed.: New Production Technologies in Aerospace Industry. Springer Cham, Heidelberg, New York, Dordrecht, London (2014) S. 47 - 53.
DOI: 10.1007/978-3-319-01964-2
ISBN: 978-3-319-01963-5 -
(2014): Hartfeinbearbeitung, In: Prozesskette Präzisionschmieden, Herausgeber: Friedrich-Wilhelm Bach, Kai Kerber, Springer-Verlag, S. 221-309.
DOI: 10.1007/978-3-642-34664-4_5 -
(2014): Methoden zur Bewertung der Verschleißmechanismen beim Schleifen von PCBN-Wendeschneidplatten, Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen, 66. Ausgabe, Herausgeber: Berend Denkena, Hans-Werner Hoffmeister, Vulkan-Verlag, S. 37 - 48.
ISBN: 978-3802729713 -
(2011): Process and tool design for high speed cutting of granite., World of Marmomacchine, International multimedia yearbook 2011, S. 62-73.
-
(2009): Integrating Geometry Information in the Bid Generation of Die Casting Moulds., DAAAM International Scientific Book 2009, Chapter 61, ISBN 978-3-901509-71-1, Vienna, Austria, S. 629-642.
-
(2007): Simulationsbasierte Multisensorsystemauslegung., Autonome Mobile Systeme 2007, Hrsg, K. Berns, T. Luksch, S. 114-117.
Bücher
-
(2022): Einfluss von Sauerstoff auf das Schleifen von Titan, Jahrbuch Schleifen, Honen, Läppen und Polieren (2022), Nr. 70, Hrsg Hoffmeister, H.-W., Denkena, B., S. 38-48.
ISBN: 978-3-8027-3176-1 -
(2022): Energieeffiziente Prozessketten zur Herstellung eines reibungs-, gewichts- und lebensdaueroptimierten Antriebsstrangs, "Antriebsstrang 2025" - "Energieeffiziente Prozessketten zur Herstellung eines reibungs-, gewichts- und lebensdaueroptimierten Antriebstrangs" : gemeinsamer Abschlussbericht zum BMWK-Verbundprojekt (2022), Laufzeit: 01.09.2018-28.02.2022, Leibniz Universität Hannover, 136 Seiten.
DOI: https://doi.org/10.2314/KXP:1839641614 -
(2020): Energieeffiziente, flexible und wirtschaftliche Fertigungssysteme für Faserverbundwerkstoffe - Abschlussbericht zum BMBF-Verbundprojekt, Berichte aus dem IFW, Band 04/2020, ISBN: 978-3-95900-468-8, Hrsg. B. Denkena, Projektbericht, Sachgebiet: Fertigungsverfahren, 126 S.
ISBN: 978-3-95900-468-8 -
(2019): New Production Technologies in Aerospace Industry, Berichte aus dem IFW, IFW 7/2019, ISBN: 978-3-95900-379-7, Hrsg. B. Denkena, Tagungsband, Sachgebiet: Luft- und Raumfahrttechnik, 360 S.
ISBN: 978-3-95900-379-7 -
(2018): HLProKet - Hochleistungsprozesskette in der Großserienfertigung, Berichte aus dem IFW, Band 11/2018, Hrsg. B. Denkena, 122 S.
ISBN: 978-3-95900-226-4 -
(2018): IPROM - Innovative Prozesskette zur Massivteilfertigung, Berichte aus dem IFW, IFW 06/2018, ISBN: 978-3-95900-199-1, Hrsg. B. Denkena, Projektbericht, Sachgebiet: Fertigungsverfahren, 133 S.
ISBN: 978-3-95900-199-1 -
(2018): New Production Technologies in Aerospace Industry, Berichte aus dem IFW, IFW 13/2018, ISBN: 978-3-95900-236-3, Hrsg. B. Denkena, Tagungsband, Sachgebiet: Luft- und Raumfahrttechnik, 342 S.
ISBN: 978-3-95900-236-3 -
(2017): Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, ISBN: 978-0-12-811939-6, Hrsg. B. Denkena & T. Mörke, Elsevier Fachverlag, 492 S.
ISBN: 978-0-12-811939-6 -
(2017): RETURN - Prozesskette Recycling von Titanspänen, Berichte aus dem IFW, Band 02/2017, ISBN: 978-3-95900-125-0, Hrsg. B. Denkena, Projekt-Abschlussbericht, 107 S.
ISBN: 978-3-95900-125-0 -
(2017): PiA – Prozesskette im Automobilbau, Berichte aus dem IFW, Band 05/2017, ISBN: 978-3-95900-141-0, Hrsg. B. Denkena, Tagungsband, Sachgebiet: Fertigungsverfahren, 138 S.
ISBN: 978-3-95900-141-0 -
(2016): THe „A“ Coatings 2016, Berichte aus dem IFW, Band 03/2016, ISBN: 978-3-95900-072-7, Hrsg. K. Bobzin, K.-D. Bouzakis, B. Denkena, H. J. Maier, M. Merklein, Tagungsband, Sachgebiet: Produktionstechnik, 268 S.
ISBN: 978-3-95900-072-7 -
(2016): PiA - Prozesskette im Automobilbau, Berichte aus dem IFW, Band 04/2016, ISBN: 978-3-95900-079-6, Hrsg. B. Denkena, Tagungsband, Sachgebiet: Produktionstechnik, 130 S.
ISBN: 978-3-95900-079-6 -
(2016): New Production Technologies in Aerospace Industry, Berichte aus dem IFW, IFW 10/2016, ISBN: 978-3-95900-103-8, Hrsg. B. Denkena, Tagungsband, Sachgebiet: Luft- und Raumfahrttechnik, 463 S.
ISBN: 978-3-95900-103-8 -
(2016): Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 67. Ausgabe, ISBN: 978-3-8027-2984-3, Hrsg. Hans-Werner Hoffmeister, Berend Denkena, Vulkan Verlag, 303 S.
ISBN: 978-3-8027-2984-3 -
(2015): Pro³gression - Diligent Production, Berichte aus dem IFW, ISBN: 978-3-95900-030-7, Hrsg. B. Denkena, Abschlussbericht, Projektbericht, Sachgebiet: Produktionstechnik, 394 S.
ISBN: 978-3-95900-030-7 -
(2015): New Production Technologies in Aerospace Industry, Berichte aus dem IFW, IFW 05/2015, ISBN: 978-3-95900-042-0, Hrsg. B. Denkena, Tagungsband, Sachgebiet: Luft- und Raumfahrttechnik, 385 S.
ISBN: 978-3-95900-042-0 -
(2014): New Production Technologies in Aerospace Industry, Berichte aus dem IFW, IFW 08/2014, ISBN: 978-3-944586-87-8, Hrsg. B. Denkena, Tagungsband, Sachgebiet: Fahrzeugtechnik, 477 S.
ISBN: 978-3-944586-87-8 -
(2014): koSePro - Wirtschaftliche, adaptronische und sichere Schlüsselkomponenten für die Servicerobotik in der Produktion: Abschlussbericht , Berichte aus dem IFW, IFW 2010 koSePro, ISBN 978-3-941416-19-2, Hrsg. B. Denkena, Abschlussbericht, Projektbericht , Sachgebiet: Robotik, 107 S.
ISBN: 978-3-941416-19-2 -
(2013): Process Machine Interactions: Predicition and Manipulation of Interactions between Manufacturing Processes and Machine Tool Structures, Schriftenreihe: Lecture notes in production Engineering, 2013, Springer Verlag, ISBN 978-3-642-32447-5, Hrsg. Denkena, B., Hollmann, F., 519 S.
ISBN: 978-3-642-32447-5 -
(2013): NC Plus - prozess- und wertschöpfungsorientiert gesteuerte Werkzeugmaschine, Berichte aus dem IFW, ISBN 978-3944586120, Abschlussbericht, 100 S.
ISBN: 978-3944586120 -
(2013): System-Integrated Intelligence: New Challenges for Product and Production Engineering, 1st Joint Symposium on Systems-Integrated Intelligence: Challenges for Product and Production Engineering, June 27th to 29th 2012, Hannover, Schriftenreihe: Production engineering: research and development, Springer Verlag, 7.2013,1, 130 S.
-
(2013): Basics of Cutting and Abrasive Processes , Schriftenreihe: Lecture Notes in Production Engineering, 2013, Springer Verlag, ISBN 978-3642332562, Hrsg. Tönshoff, H. K., Denkena, B., 399 S.
ISBN: 978-3642332562 -
(2012): Elektronische Fakultätenbefragung, acatech Studie, September 2012, Faszination Konstruktion, Berufsbild und Tätigkeitsfeld im Wandel, Herausgeber: Albers, A., Denkena, B., Matthiesen, S., S.19-36.
-
(2012): Das Maschinenbaustudium - ein möglicher Bildungsweg hin zum Konstrukteurberuf, acatech Studie, September 2012, Faszination Konstruktion, Berufsbild und Tätigkeitsfeld im Wandel, Herausgeber: Albers, A., Denkena, B., Matthiesen, S., S. 15-18.
-
(2012): Analyse von Studienordnungen, acatech Studie, Faszination Konstruktion, Berufsbild und Tätigkeit im Wandel, Herausgeber: Albers, A., Denkena, B., Matthiesen, S., S. 37-46.
-
(2012): ENµA - Energieautarke µ-Systeme in Werkzeugmaschinen, Berichte aus dem IFW, ISBN 978-3-943104-42-4, Projekt-Abschlussbericht, 84 S.
ISBN: 978-3-943104-42-4 -
(2012): Werkzeuge für die Zerspanung - Spanende Fertigung für die Medizintechnik, Berichte aus dem IFW, Band 3/2012, ISBN 978-3-943104-46-2, Begleitband zum Seminar, Hannover, 21. und 22. März 2012, 206 S.
ISBN: 978-3-943104-46-2 -
(2012): New Manufacturing Technologies in Aerospace Industry, Reihe: IFW Volume 09/2012, ISBN 978-3-943104-76-9, Machining Innovations Conference, Proceedings, November 14th and 15th 2012, Hannover, 463 S.
ISBN: 978-3-943104-76-9 -
(2011): Spanen - Grundlagen, 3., bearb. u. erweiterte Auflage, ISBN: 978-3-642-19771-0, Hrsg. Denkena, B., Tönshoff, H.K., 426 S.
ISBN: 978-3-642-19771-0 -
(2011): Werkzeuge für die Zerspanung - Werkzeuge für die Zerspanung im Fahrzeugbau, Berichte aus dem IFW, Band 01/2011, ISBN ISBN 978-3-941416-87-1 , Begleitband zum Seminar, Hannover 16. und 17. Februar 2011, 225 S.
ISBN: ISBN 978-3-941416-87-1 -
(2011): New Manufacturing Technologies in Aerospace Industry, Berichte aus dem IFW, Band 7/2011, ISBN 978-3-943104-18-9 , Machining Innovations Conference, Proceedings, September 22nd and 23rd 2011, Hannover, 365 S.
-
(2010): Werkzeuge für die Zerspanung, Berichte aus dem IFW, Band 02/2010, 200 S., ISBN 978-3-941416-46-86, Tagungsband zum Seminar, 10. und 11. Februar 2010, Hannover.
ISBN: 978-3-941416-46-8 -
(2010): Neue Fertigungstechnologien in der Luft- und Raumfahrt, Machining Innovations Conference, Tagungsband, 23. und 24. November 2010, Hannover, Berichte aus dem IFW, Band 08/2010, ISBN 978-3-941416-78-9, 488 S.
ISBN: 978-3-941416-78-9 -
(2009): Neue Fertigungstechnologien in der Luft- und Raumfahrt ; Begleitband zum Seminar ; Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover, 24. und 25. November 2009. , Berichte aus dem IFW, Band 06/2009, Hrsg. Berend Denkena, 223 S., ISBN 978-3-941416-38-3, PZH Produktionstechnisches Zentrum GmbH.
-
(2009): Jahrbuch Schleifen, Honen, Läppen und Polieren., 64. Ausgabe, 600 S., ISBN 978-3-8027-2954-6, Vulkan Verlag.
-
(2008): LoeWe - lebenszyklusorientierte Werkzeugmaschine. Abschlussbericht im Rahmenprogramm "Werkzeugmaschinen für die Produktion von Morgen." , ISBN 978-3-941416-07-9, PZH Produktionstechnisches Zentrum GmbH, 95 S.
-
(2008): Genetik und Intelligenz - neue Wege in der Produktionstechnik : Sonderforschungsbereich 653, Gentelligente Bauteile im Lebenszyklus, Nutzung vererbbarer, bauteilinhärenter Informationen in der Produktionstechnik, Leibniz Universität Hannover., ISBN 978-3-939026-81-5, PZH Produktionstechnisches Zentrum GmbH, 18 S.
-
(2008): 1st Intenational Conference on Process Machine Interactions : Hannover, Germany, September 3 - 4, 2008., ISBN 978-3-939026-95-2, PZH Produktionstechnisches Zentrum GmbH, 394 S.
-
(2008): Neue Fertigungstechnologien in der Luft- und Raumfahrt ; Begleitband zum Seminar ; Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover 19. und 20. November 2008., Berichte aus dem IFW, Band 10/2008, Hrsg. Berend Denkena, 204 S., ISBN 978-3-941416-05-5, PZH Produktionstechnisches Zentrum GmbH.
-
(2008): Werkzeuge für die Zerspanung : Entwicklung, Prozesskette, Einsatz ; Begleitband zum Seminar ; Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover 13. und 14. Februar 2008. , Berichte aus dem IFW, Band 03/2008, Hrsg. Berend Denkena, 230 S., ISBN 978-3-939026-74-7, PZH Produktionstechnisches Zentrum GmbH.
-
(2008): 6. IFW-Steinkolloquium : Entwicklungen in der Naturstein- und Bauwerkstoffbearbeitung ; Begleitband zum Seminar; Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover 12. und 13. November 2008. , Berichte aus dem IFW, Band 09/2008, Hrsg. Berend Denkena, 186 S., ISBN 978-3-941416-04-8, PZH Produktionstechnisches Zentrum GmbH.
ISBN: 978-3-941416-04-8 -
(2007): Ramp-Up/2 - Anlaufoptimierung durch Einsatz virtueller Fertigungssysteme., Band 5 der Reihe "Schneller Produktionsanlauf in der Wertschöpfungskette, 1. Auflage, 187 S., ISBN 978-3-8163-0546-0, VDMA-Verlag.
-
(2007): Werkzeugmaschinenbau in Hannover II. Problemlösungen-Sondermaschinen-Marktentwicklung-Messepräsenz-Steuerungen., Berichte aus dem IFW, Band 8/2007, Hrsg. Berend Denkena, 93 S., ISBN 978-3-939026-61-7, PZH Produktionstechnisches Zentrum GmbH.
-
(2007): Werkzeugmaschinenbau in Hannover II: Problemlösungen, Sondermaschinen, Marktentwicklung, Messepräsenz, Steuerungen., Berichte aus dem IFW, Band 8/2007, Hrsg. Berend Denkena, 93 S., ISBN 978-3-939026-61-7, PZH Produktionstechnisches Zentrum GmbH.
-
(2007): Gentelligente Bauteile im Lebenszyklus : Nutzung vererbbarer, bauteilinhärenter Informationen in der Produktionstechnik ; Sonderforschungsbereich 653 ; 1. Kolloquium Genetik und Intelligenz - Neue Wege in der Produktionstechnik 19. April 2007, Hannover., ISBN 978-3-939026-46-4, 79 S., PZH Produktionstechnisches Zentrum GmbH.
-
(2007): Werkzeuge für die Zerspanung : Entwicklung, Prozesskette, Einsatz ; Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover 14. und 15. Februar 2007., Berichte aus dem IFW, Band 2/2007, Hrsg. Berend Denkena, 228 S., ISBN 978-3-939026-42-6, PZH Produktionstechnisches Zentrum GmbH.
-
(2007): Neue Fertigungstechnologien in der Luft- und Raumfahrt : Begleitband zum Seminar ; Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover, 28. und 29. November 2007. , Berichte aus dem IFW, Band 11/2007, Hrsg. Berend Denkena, 210 S., ISBN 978-3-939026-68-6, PZH Produktionstechnisches Zentrum GmbH.
-
(2007): Jahrbuch Schleifen, Honen, Läppen und Polieren : Verfahren und Maschinen. , 63. Ausgabe, 509 S., ISBN 978-3-8027-2941-6, Vulkan Verlag.
-
(2006): Hochgeschwindigkeitsspanen metallischer Werkstoffe, Berichte aus dem IFW, Band 02/2006, 310 S., ISBN 3-939026-06-9 , Begleitband zum Kolloquium.
ISBN: 3-939026-06-9 -
(2005): Spanbildung und Temperaturen beim Spanen mit hohen Schnittgeschwindigkeiten., Hochgeschwindigkeitsspanen, S. 1-40.
-
(2005): Auswirkung des Hochgeschwindigkeitsspanens auf die Werkstückrandzone., Hochgeschwindigkeitsspanen, S. 64-88.
-
(2004): Spanen : Grundlagen., 2., erw. und neu bearb. Aufl, ISBN 3-540-00588-9, Springer Verlag, 417 S.
Beiträge in Büchern
-
(2022): Untersuchungen zum Transport und Einformen an keramischen Schleifbelagsmischungen für die Schleifwerkzeugherstellung, Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen (2022), Nr. 70, Vulkan Verlag, S. 61-72.
ISBN: 978-3-8027-3176-1 -
(2021): Schalenförmige Hybridverbunde und Inserts, Intrinsische Hybridverbunde für Leichtbautragstrukturen (2021), Grundlagen der Fertigung, Charakterisierung und Auslegung, Springer Vieweg, Berlin, Heidelberg, S. 11–120.
DOI: https://doi.org/10.1007/978-3-662-62833-1_2
ISBN: 978-3-662-62832-4 -
(2021): Requirements for the Optimization of Processes Using a Digital Twin of Production Systems, DigiTwin: An Approach for Production Process Optimization in a Built Environment (2021), Chapter 2, Springer, Cham, 23 Seiten.
DOI: https://doi.org/10.1007/978-3-030-77539-1_2
ISBN: 978-3-030-77538-4
ISSN: 1860-5168 -
(2021): Design of simulation models, DigiTwin: An Approach for Production Process Optimization in a Built Environment (2021), Chapter 9, Springer, Cham, 26 Seiten.
DOI: https://doi.org/10.1007/978-3-030-77539-1_9
ISBN: 978-3-030-77538-4
ISSN: 1860-5168 -
(2020): Simulationsbasierte kombinierte Instandhaltungs- und Produktionsplanung, Ablaufsimulation in der Automobilindustrie, Springer Vieweg, Hrsg. G. Mayer, C. Pöge, S. Spieckermann, S. Wenzel, S. 261-273.
DOI: 10.1007/978-3-662-59388-2
ISBN: 978-3-662-59387-5 -
(2018): Charakterisierungsmethoden für Schleifscheiben und ihre Anwendung an sintermetallischen Diamantwerkzeugen, Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 68. Ausgabe, Vulkan Verlag, ISBN: 978-3-8027-3091-7, S. 117-129.
ISBN: 978-3-8027-3091-7 -
(2018): Verschleißmechanismen beim trockenen Seilschleifen von Stahl, Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen, 68. Ausgabe, Vulkan Verlag, ISBN: 978-3-8027-3091-7, S. 168 - 180.
ISBN: 978-3-8027-3091-7 -
(2017): Defined manipulation of workpiece surface and subsurface properties by extending the field of application of a fast tool servo, Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, Elsevier Fachverlag, ISBN 978-0-12-811939-6, S. 399-407.
-
(2017): Feeling clamping system , Cyber-Physical and Gentelligent Systems in Manufacturing and Life Cycle, 1. Ausgabe, Elsevier Fachverlag, S. 332 - 353.
ISBN: 978-0-12-811939-6 -
(2014): Microstructuring by means of cutting processes, Microstructuring of Thermo-Mechanically Highly Stressed Surfaces: Final Report of the DFG Research Group 576, Springer Verlag, 2014, S. 28 - 58.
ISBN: 978-3-319-09691-9 -
(2013): Competence-Based Planning of Coupled Process Chains, Advances in Sustainable and Competitive Manufacturing Systems, 23rd International Conference on Flexible Automation and Intelligent Manufacturing, Editor Américo Azevedo, Springer Verlag 2013, S. 1009-1021.
DOI: 10.1007/978-3-319-00557-7
ISBN: 978-3-319-00556-0 -
(2011): Adaptronische Spindeleinheit für Fräsmaschinen., Adaptronik für Werkzeugmaschinen: Forschung in Deutschland, Hrsg. von J. Hesselbach, S. 343-363.
-
(2011): Adaptronische Genauigkeitssteigerung von Hochgeschwindigkeits-Werkzeugmaschinen mit kontaktlosen Antriebs- und Führungseinheiten., Adaptronik für Werkzeugmaschinen: Forschung in Deutschland, Hrsg. von J. Hesselbach, S. 67-90.
-
(2011): Methodik zur Bewertung der Trennschleifeigenschaften von Beton, Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 65. Ausgabe, Hrsg. H.-W. Hoffmeister, B. Denkena, S. 171-186.
-
(2011): Geometrisch-kinematisches Rauheits-Modell bei der Bearbeitung biomedizinischer Keramik mittels torischer Schleifstifte., Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 65. Ausgabe, Hrsg. H.-W. Hoffmeister, B. Denkena, S. 29-51.
-
(2011): Biocompatible Magnesium Alloys as Degradable Implant Materials - Machining Induced Surface and Subsurface Properties and Implant Performance, Special Issues on Magnesium Alloys, ed. by W.A. Monteiro, S. 109-127.
-
(2011): Mechanische Bearbeitung von Magnesiumimplantaten., Sonderforschungsbereich 599: Zukunftsfähige bioresorbierbare und permanente Implantate aus metallischen und keramischen Werkstoffen, 2010, Hrsg. Thomas Lenarz, Friedrich-Wilhelm Bach und Ingo Nolte, S. 197-220.
-
(2011): Modellierung und Simulation, Spanen Grundlagen, 3. Auflage, Hrsg. Denkena, B., Tönshoff, H.K., Kapitel 6, S. 109-134.
-
(2011): Spanformung, Spanen Grundlagen, 3. Auflage, Hrsg. Denkena, B., Tönshoff, H.K., Kapitel 3, S. 37-50.
-
(2011): Schneidstoffe, Spanen Grundlagen, 3. Auflage, Hrsg. Denkena, B., Tönshoff, H.K., Kapitel 8, S. 167-199.
-
(2011): Oberflächen- und Randzoneneigenschaften, Spanen Grundlagen, 3. Auflage, Hrsg. Denkena, B., Tönshoff, H.K., Kapitel 16, S. 363-385.
-
(2011): Prozessauslegung und -integration., Spanen Grundlagen, 3. Auflage, Hrsg. Denkena, B., Tönshoff, H.K., Kapitel 15, S. 339-361.
-
(2011): Verzahnungsschleifen, Spanen Grundlagen, 3. Auflage, Hrsg. Denkena, B., Tönshoff, H.K., Kapitel 14, S. 317-337.
-
(2011): Keramikimplantate. Teilprojekt D4., Sonderforschungsbereich 599: Zukunftsfähige bioresorbierbare und permanente Implantate aus metallischen und keramischen Werkstoffen, 2010, Hrsg. Thomas Lenarz, Friedrich-Wilhelm Bach und Ingo Nolte, S. 47-66.
-
(2011): Micromachining of Parts for Microsystems., Design and Manufacturing of Active Microsystems, Eds. S. Büttgenbach, A. Burisch, J. Hesselbach, S. 245-266.
-
(2011): Active Linear Guiding Concepts for Microsystems, Design and Manufacturing of Active Microsystems, Microtechnology and MEMS, Hrsg. S. Büttgenbach, Springer Verlag 2011, S. 109-126.
-
(2011): Biomimetische Keramiken. Teilprojekt D9., Sonderforschungsbereich 599: Zukunftsfähige bioresorbierbare und permanente Implantate aus metallischen und keramischen Werkstoffen, 2010, Hrsg. Thomas Lenarz, Friedrich-Wilhelm Bach und Ingo Nolte, S. 117-133.
-
(2010): Mathematics for Machine Tools and Factory Automation. , Production Factor Mathematics, Eds. Grötschel, M., Lucas, K., Mehrmann, V., 2010, S. 231-247.
-
(2010): Herstellung und Einsatzverhalten von Vollhartmetallwerkzeugen., Formgebung: Chancen der Pulvermetallurgie, Hrsg. Hans Kolaska, ISBN 978-3-939935-59-9, S. 201-211.
-
(2009): Größeneinflüsse auf die Spanbildung und die Randzone bei der Hartzerspanung., Größeneinflüsse bei Fertigungsprozessen, Hrsg. F. Vollertsen, BIAS Verlag, S. 1-26.
-
(2009): Einfluss der Spanungsquerschnittsform auf die Spanbildung. , Größeneinflüsse bei Fertigungsprozessen, Hrsg. F. Vollertsen, BIAS Verlag, S. 395-414.
-
(2009): Polieren von Biokeramiken mit gebundenem Korn., Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 64. Ausgabe, Hrsg. H.-W. Hoffmeister, B. Denkena, Vulkan Verlag, S. 299-314.
-
(2009): Hochauflösendes Inline-Messsystem auf Basis des Zeilenkamerschnitts., Photogrammetrie, Laserscanning, Optische 3D-Messtechnik: Beiträge der Oldenburger 3D-Tage 2009, Hrsg. Luhmann/Müller, S. 299-307.
-
(2009): Technologische Kenngrößen für das kontinuierliche Wälzschleifen von Verzahnungen., Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 64. Ausgabe, Hrsg. H.-W. Hoffmeister, B. Denkena, Vulkan Verlag, S. 2-13.
-
(2008): Wechselwirkungen zwischen Prozess und Maschine., Spanende Fertigung, 5. Ausgabe, Hrsg, K. Weinert, D. Biermann, S. 56-64.
-
(2008): Mathematik für Werkzeugmaschinen und Fabrikautomatisierung., Produktionsfaktor Mathematik : wie Mathematik Technik und Wirtschaft bewegt, Hrsg. Martin Grötschel/Klaus Lucas, S. 285-305.
-
(2008): Genauigkeitssteigerung durch Kalibrierung, Korrektur und Kompensation., Fertigungsmaschinen mit Parallelkinematiken: Forschung in Deutschland, hrsg. von Uwe Heisel und Hartmut Weule, S. 183-224.
-
(2008): Modellgestützte Steuerung und Kraftregelung von Parallelkinematiken., Fertigungsmaschinen mit Parallelkinematiken: Forschung in Deutschland, hrsg. von Uwe Heisel und Hartmut Weule, S. 323-347.
-
(2007): Werkzeugauslegung für die Hochgeschwindigkeitsbearbeitung von Granit., Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 63. Ausgabe, Hrsg. Hans-Werner Hoffmeister, Berend Denkena, S. 156-173.
-
(2007): Charakterisierung des Einflusses des Punktcrushierens auf den Schleifbelag., Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 63. Ausgabe, Hrsg. Hans-Werner Hoffmeister, Berend Denkena, S. 174-184.
-
(2007): Kontakterosives Abrichten von feinkörnigen metallisch gebundenen Schleifscheiben. , Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 63. Ausgabe, Hrsg. Hans-Werner Hoffmeister, Berend Denkena, S. 185-195.
-
(2007): Spanende Mikrostrukturierung duktiler Werkstoffe. , Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 63. Ausgabe, Hrsg. Hans-Werner Hoffmeister, Berend Denkena, S. 245-254.
-
(2007): Herstellung von großflächigen Mikrostrukturen durch Schleifen mit SiC- und CBN-Schleifscheiben. , Jahrbuch Schleifen, Honen, Läppen und Polieren, Verfahren und Maschinen, 63. Ausgabe, Hrsg. Hans-Werner Hoffmeister, Berend Denkena, S. 233-243.
-
(2006): Integrated Process Planning and Production Control., Multiagent Engineering: Theory and Applications in Enterprises, S. 91-112.
-
(2005): Tiefenaufgelöste Eigenspannungsmessungen an unterschiedlich geschliffenen Hartmetall-Wendeschneidplatten., Jahrbuch, Schleifen, Honen, Läppen und Polieren, Ausgabe 62, S. 2-10.
-
(2005): Gestaltung und Bewertung der Wandlungsfähigkeit von Betriebsmitteln., Planung modularer Fabriken: Vorgehen und Beispiele aus der Praxis, S. 68-92.
-
(2005): Einsatz von Acoustic Emission Signalen zur Schleifprozessauslegung., Jahrbuch, Schleifen, Honen, Läppen und Polieren, Ausgabe 62, S. 38-53.
-
(2005): Komplettbearbeitung komplexer Werkstücke., Spanende Fertigung, S. 79-89.
-
(2005): Profilabrichten von Werkzeugen zum kontinuierlichen Wälzschleifen von Zahnrädern., Jahrbuch, Schleifen, Honen, Läppen und Polieren, Ausgabe 62, S. 236-244.
-
(2005): Schleifen von Stahl-Keramik-Verbunden mit Diamantschleifscheiben., Jahrbuch, Schleifen, Honen, Läppen und Polieren, Ausgabe 62, S. 108-116.
-
(2005): Bearbeitung von Biokeramik zur Implantatherstellung., Jahrbuch, Schleifen, Honen, Läppen und Polieren, Ausgabe 62, S. 201-209.
-
(2005): Sicherheit bei der Bearbeitung von Magnesium., Fügen von Magnesiumwerkstoffen, S. 166-171.
-
(2004): Kontinuierliches Wälzschleifen von Verzahnungen., Jahrbuch Schleifen, Honen, Läppen und Polieren, Ausgabe 61, S. 65-77.
-
(2004): Kontakterosives Konditionieren., Jahrbuch Schleifen, Honen, Läppen und Polieren, Ausgabe 61, S. 189-197.
-
(2004): Grübchentragfähigkeit einsatzgehärteter Verzahnungen., Jahrbuch Schleifen, Honen, Läppen und Polieren, Ausgabe 61, S. 245-251.
-
(2004): Einfluss der Prozessauslegung unterschiedlicher Schleifverfahren zur Herstellung von Hartmetallwerkzeugen auf den Eigenspannungszustand der Randzone., Jahrbuch Schleifen, Honen, Läppen und Polieren, Ausgabe 61, S. 78-88.
-
(2004): Nonlinear Dynamics of an External Cylindrical Grinding System and a Strategy for Chatter Compensation., Nonlinear Dynamics of Production Systems, S.187-207.
-
(2003): Prozesskettengestaltung beim Schleifen von Kurbelwellen., Marktchance Individualisierung, Hrsg. Reinhart, G., Zäh, M..F., S. 357-366.
-
(2003): Der Berg geht zum Propheten oder die Maschine zum Werkstück., Autonome Produktion, Hrsg. Klocke, F., Pritschow, G., S. 580-591.
-
(1993): Werkzeuge für die moderne Fertigung: Möglichkeiten zur Rationalisierung in der spanenden Fertigung., Expert-Verlag, Kontakt & Studium, Band 370, S. 1-36.
-
(1990): Verschleiß von Bauteilen aus Aluminiumoxidkeramik aufgrund instationärer thermischer und mechanischer Beanspruchung. , VDI Berichte, Nr. 797, S. 633-640.
Vortrag
-
(2023): Einfluss des Festwalzens auf den Eigenspannungszustand und das Einsatzverhalten additiv gefertigter Komponenten, Frühjahrssitzung FA Eigenspannungen (2023) 28. März 2023, Berlin, Deutschland, 24 Seiten.
-
(2023): Feeling spindle for process force measurement in tool grinding, 15th International Conference & Exhibition, Lampamap (2023), 14.-15. March 2023, Edinburgh, UK, 14 Seiten.
-
(2022): Mehrkoordinatenantriebstechnik für Vorschubachsen in Werkzeugmaschinen, 23. Dresdner Werkzeugmaschinen-Fachseminar (2022), 04. – 05. Juli 2022, Dresden, 19 Seiten.
-
(2022): Wear reduction in continuous generating grinding of milling tools with CBN-grinding worms, 19th International Conference on Precision Engineering (2022), 28. November – 2. December 2022, Nara, Japan, 12 Seiten.
-
(2022): Cutting-Edge research in Hannover, Invited Workshop on “Advanced Frugal Innovation” (2022), 28.-29. September 2022, Hannover, Germany, 17 Seiten.
-
(2022): Energy-efficient Machine Tools and Technologies, International Conference on Precision Engineering and Sustainable Manufacturing (PRESM 2022), 20.-22. July 2022, Jungmun, Jeju-do, Korea, 21 Seiten.
-
(2022): State space controller for actuator control of an active jerk decoupled feed drive, Precision Motion Systems & Control, Euspen, (2022), 15.- 16. November 2022, Brabanthallen's-Hertogenbosch, The Netherlands, 27 Seiten.
-
(2022): The impact of training data selection on machine learning algorithms using the example of force reconstruction, The 71th CIRP General Assembly (2022), 21.-27. August 2022, Bilbao, Spain, 14 Seiten.
-
(2022): Machine learning based reconstruction of process forces, 6th International Conference on System-Integrated Intelligence, SysInt (2022), 07.-09. September 2022, Genova, Italy, 16 Seiten.
-
(2021): Characterization of heat conductivity of eccentrically rotating heat pipes used for cooling of motor spindles, 2nd Int. Conference on Thermal Issues in Machine Tools, online, April 20, 2021, Prague, 16 Seiten.
-
(2021): Sensing linear roller guide carriages for condition monitoring applications, 21st Machining Innovations Conference for Aerospace Industry 2021, December 2nd 2021, 16 Seiten.
-
(2021): Application of natural rocks in cutting aluminum, Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP) Lecture Notes in Production Engineering, September 2021, Dresden, 12 Seiten.
-
(2021): Modellbasierte Herstellung von Schleifwerkzeugen, 13. Seminar „Moderne Schleiftechnologie und Feinstbearbeitung“ (2021), 04. März 2021, 24 Seiten.
-
(2021): Determination of the process damping coefficient using plain cutting tests, 9th CIRP High Performance Cutting (HPC) Conference (2021), virtual conference, 24.-26.05.2021, 8 Seiten.
-
(2021): Finite element simulation of sintering of metal-bonded grinding wheels, 18th CIRP Conference on Modelling of Machining Operations, June 16-17, 2021, 7 Seiten.
-
(2021): Automated Turbine Blade Repair Planning and Execution, AMRGT (2021), 05.-08. October 2021, online, 20 Seiten.
-
(2020): Correlation between coating properties and thermal load of CrAlN coated cutting tools during machining of AISI4140, 14th International Conference “THE A Coatings” in Manufacturing Engineering, 9th November 2020, online, 18 Seiten.
-
(2020): Influence of subsurface properties on the application behavior of hybrid components, 5th CIRP Conference on Surface Integrity, 1st - 5th June 2020, 1st E-conference, 22 Seiten.
-
(2020): Mechatronic damping systems as enablers for autonomous machine tools, 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), December 2nd 2020, Hannover, Germany, 20 Seiten.
-
(2020): Material identification during turning by neural network, XXXI CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems, 10.03.2020, Karpacz, Polen, 16 Seiten.
-
(2020): Piezo-actuated hybrid tool for the micro structuring of cylinder liners in an energy-efficient process chain, 5th International Conference on System-Integrated Intelligence: Intelligent, flexible and connected systems in products and production, SysInt 2020, November 11th-13th, Bremen, 17 Seiten.
-
(2020): Design of a sensor integrated vacuum mounting system for a mobile machine tool, The 9th International Conference of Manufacturing Technology Engineers (ICMTE 2020), 19.10.2020 (online), 16 Seiten.
-
(2020): Sensory zero-point clamping system for condition and process monitoring, 8th CIRP Global Web Conference, October 14-16, 2020, 15 Seiten.
-
(2020): Methodology for thermal optimization of motor spindles, Euspen Special Interest Group Meeting: Thermal Issues, Aachen, Feb. 26th 2020, 17 Seiten.
-
(2020): Reducing control delay times to enhance dynamic stiffness of magnetic bearings (AMB), Special Interest Group Meeting: Precision Motion Systems & Control, 17th-18th November 2020, online, 8 Seiten.
-
(2020): Preload control of spindle bearings by means of shape memory alloys, 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), 03.12.2020, Hannover, Germany, 19 Seiten.
-
(2020): Deflection compensation on a force sensing mobile machine tool, 5th International Conference on System-Integrated Intelligence: Intelligent, flexible and connected systems in products and production, SysInt 2020, November 11th-13th, Bremen, 20 Seiten.
-
(2020): Efficient Generation of a Digital Twin Using Object Detection for Data Acquisition and XML Interface for Model Creation, 53rd CIRP Conference on Manufacturing Systems, 1.-3. Juli 2020, Chicago, 19 Seiten.
-
(2020): Simulationsbasierte Auslegung von Schneidkantenverrundungen beim Drehen, Cenit Simulation User Day - DEFORM ® Machining Workshop, 3. März 2020, Stuttgart, 33 Seiten.
-
(2020): Mechanical finishing of wire arc additive manufactured aluminum components, 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), December 2nd 2020, Hannover, Germany, 15 Seiten.
-
(2020): Wear behaviour of coated cemented carbide inserts in an oxygen free atmosphere when machining Ti-6Al-4V, 14th International Conference “THE A Coatings” in Manufacturing Engineering, 16.-20.11.2020, online, 21 Seiten.
-
(2020): Reduzierung der Treibhausgasemission durch energieeffiziente Prozessketten für die Herstellung von Antriebsstrangkomponenten, 5. Fachtagung sensitive Fertigungstechnik, 14.11.2019, Magdeburg, 20 Seiten.
-
(2020): Local Fiber Metal Laminate used as Load Introduction Element for Thin Walled CFRP Structures, Hybrid 2020 (online), 29.04.2020, Karlsruhe, 23 Seiten.
-
(2020): SFB 871 – Regeneration komplexer Investitionsgüter Systemdemonstrator, 20th Machining Innovations Conference for Aerospace Industry 2020 (MIC 2020), 2. Dezember 2020, Hannover, 27 Seiten.
-
(2019): Improving technological machining simulation by tailored workpiece models and kinematcis, 17th CIRP Conference on Modeling of Machining Operations, 13th -14th June, 2019, Rotherham, UK, 14 Seiten.
-
(2019): Cyber-physisches Kombinationswerkzeug für die Mikrostrukturierung von Zylinderlaufbuchsen, 21. Dresdner Werkzeugmaschinen-Fachseminar, 03.12.2019, Dresden, 29 Seiten.
-
(2019): Analysis of different machine learning algorithms to learn stability lobe diagrams, 13th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Ischia, Naples, Italy, 34 Seiten.
-
(2019): Sensing guide carriages for force measurement and condition monitoring, IWMT 2019 - International Workshop on Micromanufacturing Technology, 18th July 2019, Jeju-si, 17 Seiten.
-
(2019): Fühlende Werkzeugmaschine für die Fertigung von kleinen Losgrößen, 20. Dresdner WZM-Fachseminar, 04.12.2018, Dresden, 48 Seiten.
-
(2019): Compensation of part distortion in process design for re contouring processes, CIRP CMS 2019, 12th - 14th of June, 2019, Ljubljana, 17 Seiten.
-
(2019): Virtual machining of robot based machining processes, 8th International Conference on Virtual Machining Process Technology (VMPT), 23th-25th of April, 2019, Vancouver, 18 Seiten.
-
(2019): Environmental evaluation of process chains, 13th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Ischia, Naples, Italy, 19 Seiten.
-
(2019): Automatic Generation of a Digital Twin Using Scan and Object Detection for Data Acquisition, ASIM Fachtagung, September 19th 2019, Chemnitz, 18 Seiten.
-
(2019): Autonomous material-specific adaptation of process parameters for machining hybrid components, CIRP Winter Meeting CWG, 20nd of February 2019, Paris, 11 Seiten.
-
(2019): Aus alt mach neu - Digitale Prozessgestaltung zur Wiederaufbereitung von Fräswerkzeugen, 10. Wernesgrüner Werkzeugsymposium, 20. - 22.03.19, Wernesgrün, 14 Seiten.
-
(2019): Intelligent Machine Tool Components, 5th International Drive Technology Meeting, 30th - 31st March 2019, Hanover, Germany, 50 Seiten.
-
(2019): In-situ Reibwertermittlung für die Zerspansimulation, Cenit Simulation User Day, 23. Mai 2019, Stuttgart, 33 Seiten.
-
(2019): Process Design of the Patterning Process of Profile Grinding Wheels, 7th CIRPe Global Web Conference, October 16th-18th, 2019, 14 Seiten.
-
(2019): Innovative method for cutting edge preparation with flexible diamond tools, 7th CIRPe Global Web Conference, October 16th-18th, 2019, 13 Seiten.
-
(2019): Angle variation in free form grinding to improve surface roughness, The 22nd International Symposium on Advances in Abrasive Technology (ISAAT 2019), 06.-09.12.2019, Shenzhen, China, 20 Seiten.
-
(2019): Improving Blade Re-contouring Processes Using an Advanced Process Simulation And a Novel Machine Tool, Advanced Manufacturing & Repair for Gas Turbines (AMRGT), 19th of March 2019, Berlin, 20 Seiten.
-
(2019): Laser Glass Deposition, International Symposium on Future Optics, 25/26 September 2019, Herrenhausen Palace, Hannover, 1 Seite.
-
(2019): Einsatz maschineller Lernverfahren zur Überwachung von spanenden Fertigungsprozessen, Automatisierungsforum Westküste, 12. Februar 2019, 24 Seiten.
-
(2019): Automatische Generierung von Modellsätzen zur Validierung von neuen Methoden der Produktionsplanung und -Steuerung durch Materialflusssimulationen, WGP-Jahreskongress, 30. September 2019, Hamburg, 27 Seiten.
-
(2018): Stator-Integrated Damping of Chatter Vibrations for Induction Motor Spindles, International Conference on Electrical Machines and Systems (ICEMS 2018), 07.- 10. Oktober 2018, Jeju, Korea, 13 Seiten.
-
(2018): Online Compensation of Tool Deflection in Milling Operations by Feeling Machine Tools, 14th International Conference on High Speed Machining - HSM 2018, 17-18 April 2018, San Sebastian, 27 Seiten.
-
(2018): Cooling Potential of Heat Pipes and Heat Exchangers Within a Machine Tool Spindle, Euspen Special Interest Group Meeting: Thermal Issues, Dresden, March 22nd 2018, 16 Seiten.
-
(2018): Energy-efficient control of dust extraction for the machining of fibre-reinforced plastics, 6th CIRP Global Web Conference on Production Engineering, 23-25 October 2018, Shantou, China, 7 Seiten.
-
(2018): Sensing guide carriages for force measurement and condition monitoring, IWMT 2018, Seogwipo-si (서귀포시), 19th July 2018, 20 Seiten.
-
(2018): Machining of micro dimples for friction reduction in cylinder liners, 59. Tribologie-Fachtagung, Göttingen, 25th September 2018, 16 Seiten.
-
(2018): Technological CAD/CAM chain for automated polishing of geometrically complex workpieces, 6th CIRP Global Web Conference on Production Engineering, 23-25 October 2018, Shantou, China, 6 Seiten.
-
(2018): Simulation-based personnel planning considering individual competences of employee, WGP-Kongress, 19th-20th November 2018, Aachen, 19 Seiten.
-
(2018): Automated production data feedback for adaptive work planning and production control, CARV 2018, Nantes, 10.10.2018, 21 Seiten.
-
(2018): A novel tool concept for roughing and finishing operations, 18th Machining Innovations Conference for Aerospace Industry (MIC 2018), November 28th-29th, 2018, Garbsen, 14 Seiten.
-
(2018): Increased performance in high speed turning of Inconel 718 by laser structuring of PcBN tools, 8th HPC 2018 – CIRP Conference on High Performance Cutting, 25.06. - 27.06.2018, Budapest, 15 Seiten.
-
(2018): Strategien zur Minderung des Werkzeugverschleißes beim Schleifen von PCBN, Schleifseminar 2018, 22.02.2018, Dortmund, 18 Seiten.
-
(2018): Gezielte Bauteilrandzonenbeeinflussung durch innovatives, druckgeregeltes Walzen unter Verwendung eines Aerosols als Druckmedium, AWT - 13. Fachausschuss Eigenspannungen, 11.10.2017, Braunschweig, 27 Seiten.
-
(2018): Machining of Micro Dimples for Friction Reduction in Cylinder Liners, 6th CIRP Global Web Conference, 23. - 24. Oktober 2018, Shantou, China, 6 Seiten.
-
(2018): Friction reduction in heavy duty cylinder liners by machined micro dimples, EUSPEN Special Interest Group Structured and Freeform Surface, 29th November 2018, Paris, 16 Seiten.
-
(2018): Chip formation in machining metal bonded grinding layers, 6th CIRP Global Web Conference, 23. - 24. Oktober 2018, Shantou, China, 12 Seiten.
-
(2018): Porous metal bonds increase the resource effiency for Profile grinding, 25th CIRP Life Cycle Engineering (LCE) Conference, 30.04. - 02.05.2018, Copenhagen, 14 Seiten.
-
(2018): Resource Efficient Regrinding of Cemented Carbide Milling Tools, CIRP LCE 2018, 30.04.2018 - 02.05.2018, 12 Seiten.
-
(2018): Digitale Aufrüstung alter Maschinen, VDMA-Informationstag "Bestandsmaschinen in Industrie 4.0 integrieren", 18. September 2018, Frankfurt am Main, 17 Seiten.
-
(2018): Automatische OEE-Erfassung, Production Systems 2018, 19. Juni 2018, Stuttgart, 19 Seiten.
-
(2018): Tribological Influence of Machined Micro Dimples in Cylinder Liners on Heavy Duty Diesel Engines, 21st International Colloquium Tribology, 9-11 January, 18 Seiten.
-
(2017): Thermomechanical coating load in dependence of fundamental coating properties, 16th CIRP Conference on Modelling of Machining Operations, 16.06.2017, Cluny, Frankreich, 22 Seiten.
-
(2017): On the thermal insulation effect of PVD-AlCrN-coated cutting tools in continuous turning of AISI 4140 , 13th International Conference “THE-A Coatings” in Manufacturing Engineering, 5th October 2017, Thessaloniki, 22 Seiten.
-
(2017): Design of individual re-contouring processes , Machining Innovations Conference, December 6th and 7th 2017, 13 Seiten.
-
(2017): Laser heat treatment of PVD-(Al,Ti)N-coated carbide cutting tools and its effect on tool wear , 13th International Conference “THE-A Coatings” in Manufacturing Engineering, 5th October 2017, Thessaloniki, 21 Seiten.
-
(2017): Energy dispersive residual stress determination, 21. Symposium Verbundwerkstoffe und Werkstoffverbunde, 05. - 07.07.2017, Bremen, 23 Seiten.
-
(2017): Concept and control strategy for active jerk-decoupling of feed-drives, euspen´s 17th International Conference & Exhibition, 29.05. - 02.06.2017, Hannover, 19 Seiten.
-
(2017): Fühlende Werkzeugmaschinen für die Prozessüberwachung und Prozessregelung, mav Industrie 4.0 area, 22.09.2017, Hannover, 30 Seiten.
-
(2017): Regenerative grinding process of cemented carbide milling tools, 17th Machining Innovations Conference for Aerospace Industry (MIC 2017), December 6th-7th, 2017, Garbsen, 18 Seiten.
-
(2017): Automatic Regeneration of Cemented Carbide Tools for a Resource Efficient Tool Production, 15th Global Conference on Sustainable Manufacturing, 25. - 27.09.2017, Haifa, Israel, 15 Seiten.
-
(2017): Dynamic bid pricing for optimized resource utilization in small and medium-sized enterprises , CIRP ICME ´17 - 11th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 19. - 21.07.2017, Ischia, Italien, 15 Seiten.
-
(2017): Intelligente Simulationsmodelle - Nutzung von Maschinendaten zur simulationsgestützten Planung und Steuerung von Materialflüssen, 5. VDI-Fachtagung Industrie 4.0, 26.01.2017, Düsseldorf, 23 Seiten.
-
(2017): Competence-based personnel scheduling through production data, The 50th CIRP Conference on Manufacturing Systems, 03. - 05.05.2017, Taichung, China, 11 Seiten.
-
(2017): Methods of analysis for a deeper understanding of the grinding process, ISAAT 2017, December 04.-06. 2017, Okinawa, 18 Seiten.
-
(2017): Methoden für die Charakterisierung von Schleifscheibeneigenschaften, 7. WGP-Jahrestagung, 05.10.2017, Aachen, 22 Seiten.
-
(2017): Gezielte Bauteilrandzonebeeinflussung durch innovatives, druckgeregeltes Walzen unter Verwendung eines Aerosols als Druckmedium, Herbstsitzung des Fachausschusses Eigenspannungen, 11.10.2017, Technische Universität Braunschweig, 27 Seiten.
-
(2017): Wirtschaftliche und ressourceneffiziente Herstellung keramisch gebundener Superabrasiv-Schleifwerkzeuge , Hanser Schleiftagung 2017, 01.02.2017, Fellbach, 5 Seiten.
-
(2017): Verzahnungsprofilschleifen mit metallisch gebundenen Schleifscheiben , 6. GETPRO-Kongress, 28. - 29.03.2017, Würzburg, 24 Seiten.
-
(2017): Mechanical and thermal tool loads in dry diamond wire sawing of steel, 13th International Symposium „Conditioning of Radioactive Operational & Decommissioning Wastes“ (KONTEC), 23.03.2017, Dresden, 8 Seiten.
-
(2017): Simulationsunabhängige Methodik zur Kontaktflächenberechnung im Zahnfußbereich beim kont. Wälzschleifen , 6. GETPRO-Kongress, 28. - 29.03.2017, Würzburg, 24 Seiten.
-
(2017): Ressourceneffizientes Nachschleifen von Vollhartmetallfräswerkzeugen , Hanser Schleiftagung 2017, 01.02.2017, Fellbach, 5 Seiten.
-
(2017): Leistungssteigerung bei der Bearbeitung von UHC-Stahl, Stahl und Gusszerspanung 2017 / VDI-Wissensforum, 05.10.2017, 25 Seiten.
-
(2017): Increasing productivity in turning of hard-to-cut materials by means of modified flank faces, MIC 2017, 6-7 Dezember, 13 Seiten.
-
(2017): Digitalisierung für den Mittelstand, Diepholz, 12. September 2017, 21 Seiten.
-
(2017): Digitalisierung der Produktion, Hamburg, 18. Oktober 2017, 26 Seiten.
-
(2017): Influence of Prepreg Material Quality on Carbon Fiber Reinforced Plastic Laminates Processed by Automated Fiber Placement, CIRP ICME'17, 11th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 19-21 July 2017, Ischia, Naples, Italy, 12 Seiten.
-
(2017): Prozesskettenverkürzung in der Großserienfertigung , PiA - Prozesskette im Automobilbau, 03. - 04.07.2017, Bielefeld, 30 Seiten.
-
(2017): Tecnomatix Plant Simulation in the context of research and development , PLM Europe User Conference, 24.10.2017, Berlin, 35 Seiten.
-
(2017): Metal Cutting meets Industry 4.0, 22° Seminário Internacional de Alta Tecnologia, 5 de Outubro de 2017, Piracicaba, Brasilien, 29 Seiten.
-
(2017): Machine learning approach for optimization of Automated Fiber Placement processes, 1st CIRP Conference on Composite Materials Parts Manufacturing, 09.06.2017, Karlsruhe, 13 Seiten.
-
(2017): Thermal imaging as a solution for reliable monitoring of AFP processes , 3rd ACM Montreal, 20th April 2017, 12 Seiten.
-
(2017): Influence of AFP process parameters on the temperature distribution used for thermal in-process monitoring, 1st CIRP Conference on Composite Materials Parts Manufacturing, 09.06.2017, Karlsruhe, 15 Seiten.
-
(2017): Influence of Prepreg Material Quality on Carbon Fiber Reinforced Plastic Laminates Processed by Automated Fiber Placement, CIRP ICME ' 17, 11th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 19 - 21 July 2017, Ischia, Naples, Italy, 15 Seiten.
-
(2016): Prediction of the Principal Stress Direction for 5-axis Ball End Milling, 3rd CIRP Conference on Surface Integrity, 08. - 10.06.2016, Charlotte, USA, 32 Seiten.
-
(2016): Influence of residual stresses in PVD-coatings on cutting performance in turning of AISI 4140, 12th International Conference THE A Coatings 2016, 31.03. - 01.04.2016, Garbsen, 21 Seiten.
-
(2016): Residual Stresses in PVD-Coated Cutting Tools – Cause and Effect, 12th International Conference THE A Coatings 2016, 31.03. - 01.04.2016, Garbsen, 45 Seiten.
-
(2016): Simulation based Planning of Machining Processes with Industrial Robots, 16th Machining Innovations Conference for Aerospace Industry, 23. - 24.11.2016, Garbsen, 24 Seiten.
-
(2016): Virtuelle Verfahren zur Optimierung von Werkzeugschleifprozessen, 7. Wernesgrüner Werkzeugsymposium, 27. - 29.01.2016, Wernesgrün, 25 Seiten.
-
(2016): Influence of the sintering parameters on the properties of metal bonded grinding wheels, CIRP Winter Meeting, 17. - 19.02.2016, Paris, Frankreich, 16 Seiten.
-
(2016): Einsatzverhalten und Belastungskollektiv verrundeter Zerspanwerkzeuge aus Hartmetall , 35. Hagener Symposium, 24. - 25.11.2016, Hagen, 37 Seiten.
-
(2016): Improving the sensory capabilities of an electromagnetic guided rotary table for the use in machine tools, 16th Machining Innovations Conference for Aerospace Industry, 23. - 24.11.2016, Garbsen, 15 Seiten.
-
(2016): Influence of Machining Parameters on Heat Generation during Milling of Aluminum Alloys, 7th HPC 2016 - CIRP Conference on High Performance Cutting, 31.05. - 02.06.2016, Chemnitz, 21 Seiten.
-
(2016): Sensory Workpieces for Process Monitoring –an Approach, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016, 13. - 15.06.2016, Paderborn, 19 Seiten.
-
(2016): Tool deflection control by a sensory spindle slide for milling machine tools, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '16, 20. - 22.07.2016, Ischia, Italien, 26 Seiten.
-
(2016): Investigations on Thermal Management of a Machine Tool Spindle by Using Lamellar Heat Exchangers, Euspen special interest group: Thermal Issues 2016, 17. - 18.03.2016, Prag, Tschechien, 26 Seiten.
-
(2016): Design and Optimisation of an Electromagnetic Linear Guide for Ultra-Precision High Performance Cutting, 7th HPC 2016 - CIRP Conference on High Performance Cutting, 31.05. - 02.06.2016, Chemnitz, 14 Seiten.
-
(2016): Autonomous Modular Process Monitoring, 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016, 13. - 15.06.2016, Paderborn, 25 Seiten.
-
(2016): Control model for an over-determined fluid dynamic planar drive, euspen's 16th International Conference & Exhibition, 30.05. - 03.06.2016, Nottingham, England, 25 Seiten.
-
(2016): Online Compensation of Thermal Errors in Machine Tools using Temperature Field Observer, Euspen special interest group: Thermal Issues 2016, 17. - 18.03.2016, Prag, Tschechien, 21 Seiten.
-
(2016): Augmenting milling process data for shape error prediction, 49th CIRP Conference on Manufacturing Systems, 26.05.2016, Stuttgart, 11 Seiten.
-
(2016): HPC meets Industry 4.0, 7th HPC 2016 – CIRP Conference on High Performance Cutting, 31.05. - 02.06.2016, Chemnitz, 28 Seiten.
-
(2016): Combining in-house pooling and sequencing for product regeneration by means of event-driven simulation, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 21.07.2016, Neapel, Italien, 19 Seiten.
-
(2016): Energy Efficiency in Machining of Aircraft Components, 23rd Conference on Life Cycle Engineering, 22. - 24.05.2016, Berlin, 14 Seiten.
-
(2016): Optimale Werkstückpositionierung in regenerativen Werkzeugschleifprozessen mittels Best-Fit-Verfahren, 19. Anwendungsbezogener Workshop zur Erfassung, Modellierung, Verarbeitung und Auswertung von 3D-Daten, 01. - 02.12.2016, Berlin, 18 Seiten.
-
(2016): Self-optimizing cutting process using learning process models , 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, SysInt 2016, 13. - 15.06.2016, Paderborn, 16 Seiten.
-
(2016): Werkzeug- und Prozessoptimierung für die Schleifbearbeitung aluminiumhaltiger Leichtbaustähle, Hanser Schleiftagung 2016, 24.02.2016, Fellbach, 30 Seiten.
-
(2016): Prozess- und Werkzeugauslegung für das Schleifen mittels Materialabtragssimulation, 11. Seminar - Moderne Schleiftechnologie und Feinstbearbeitung - Neue Entwicklungen und Trends aus Forschung und Praxis, 03.05.2016, Stuttgart, 28 Seiten.
-
(2016): Schleifen von PCBN, Hanser Schleiftagung 2016, 24.02.2016, Fellbach, 5 Seiten.
-
(2016): Schnittunterbrechung des Schleifprozesses zur Analyse der Schleifmechanismen, 6. WGP Jahrestagung, 05. - 06.09.2016, Hamburg, 22 Seiten.
-
(2016): Novel approach for manufacturing technological based characterization of residual strength behavior of ceramic for dental applications, TMS 2016, 145th Annual Meeting & Exhibition, 14. - 18.02.2016, Nashville, USA, 15 Seiten.
-
(2016): Grinding of Riblets on Curved Paths, 19th International Symposium on Advances in Abrasive Technology, 02. - 05.10.2016, Stockholm, Schweden, 27 Seiten.
-
(2016): Influence of PVD-coating manufacturing steps on the subsurface integrity of hardened and soft AISI M3:2 high speed steel, 12th International Conference THE A Coatings 2016, 31.03. - 01.04.2016, Garbsen, 26 Seiten.
-
(2016): Oberflächennahe Eigenspannungen nach Hartdrehen und Festwalzen, AWT Fachausschuss 13 - Eigenspannungen, 26. - 27.04.2016, Freiburg, 21 Seiten.
-
(2016): Influence of hard turned roller bearings surface on surface integrity after deep rolling, 3rd CIRP Conference on Surface Integrity, 08. - 10.06.2016, Charlotte, USA, 20 Seiten.
-
(2016): Application of metal bonded CBN-wheels with micro grains , 5th European Conference on Grinding, 29. - 30.11.2016, Aachen, 4 Seiten.
-
(2016): A mechanical model of diamond wire sawing of steel structures , 19th International Symposium on Advances in Abrasive Technology, 02. - 05.10.2016, Stockholm, Schweden, 24 Seiten.
-
(2016): Estimation of production cost in an early design stage of CFRP lightweight structures, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 20. - 22.07.2016, Neapel, Italien, 12 Seiten.
-
(2016): Enhanced boundary zone rolling contact fatigue strength through hybrid machining by hard turn-rolling, Bearing World, 12. - 13.04.2016, Hannover, 33 Seiten.
-
(2016): Bestimmen von Eigenspannungsänderungen während des ersten Lastzyklus der Biegeumlaufprüfung mit Hilfe von Röntgen- und Elektronenbeugungsverfahren, AWT Fachausschuss 13 - Eigenspannungen, 26. - 27.04.2016, Freiburg, 25 Seiten.
-
(2016): Application of Combined Ultrasonic Levitation - Magnetic Actuators for Machine Guideways, ACTUATOR 2016 - 15th International Conference on New Actuators, 13. - 15.06.2016, Bremen, 16 Seiten.
-
(2016): Investigation on the Dynamic Behaviour of an Ultrasonic-Levitation Magnetic Guiding System, 6. WGP Jahrestagung, 05. - 06.09.2016, Hamburg, 16 Seiten.
-
(2016): Systematische Erstellung von Prozessketten in frühen Phasen der Produktentwicklung von CFK-Strukturen , 6. WGP Jahrestagung, 05. - 06.09.2016, Hamburg, 13 Seiten.
-
(2016): POTENTIAL OF THERMAL INLINE MONITORING IN AUTOMATED FIBER PLACEMENT PROCESS FOR AEROSPACE APLICATIONS, 7th International Symposium on Composites Manufacturing for High Performance Applications - ISCM, 24. - 25.08.2016, Braunschweig, 16 Seiten.
-
(2016): Automated Fiber Placement Head for Manufacturing of innovative Aerospace stiffening Structures, 16th Machining Innovations Conference for Aerospace Industry, 23. - 24.11.2016, Garbsen, 20 Seiten.
-
(2016): Fertigungstechnik - Makro oder Mikro?, Techniksalon Mikroprodukte, 20.10.2016, Hannover, 27 Seiten.
-
(2016): Manufacturing of osteosynthesis systems made of magnesium alloy AZ91, TMS 2016, 145th Annual Meeting & Exhibition, 14. - 18.02.2016, Nashville, USA, 14 Seiten.
-
(2016): Tribological Investigations of Angular Contact Ball Bearings Operated under Small Pivoting Angles for Production Process Analysis, 7th International Conference on Tribology in Manufacturing Processes, 28.02. - 02.03.2016, Phuket, Thailand, 23 Seiten.
-
(2016): Influence of Manufacturing Processes and Related Residual Stresses on Bearing Fatigue Life, TFC - Tribology Frontiers Conference (STLE), 11. - 15.11.2016, Chicago, USA, 30 Seiten.
-
(2016): Thermal Image-Based Monitoring for the Automated Fiber Placement Process, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 20. - 22.07.2016, Neapel, Italien, 17 Seiten.
-
(2015): Simulative Bauteil- und Prozessoptimierung im Composite Bereich, 1. Niedersächsisches Symposium Materialtechnik, 12. - 13.02.2015, Clausthal-Zellerfeld.
-
(2015): Investigation of the skive hobbing process by applying a dexel-based cutting simulation , 4th CIRP Global Web Conference on Production Engineering, 29.09. - 01.10.2015, Cranfield, England, 10 Seiten.
-
(2015): Estimation of load history by residual stress relaxation , 4th CIRP Global Web Conference on Production Engineering, 29.09. - 01.10.2015, Cranfield, England, 22 Seiten.
-
(2015): Bestimmen von Eigenspannungstiefenverläufen im Labor mittels energiedispersiver Röntgenbeugung, Fachausschusssitzung Eigenspannungen, 03. - 04.11.2015, Eschborn, 37 Seiten.
-
(2015): Simulation and Evaluation of Different Process Strategies in a 5-Axis Re-contouring Process, Machining Innovations Conference, 18. - 19.11.2015, Garbsen, 19 Seiten.
-
(2015): Electromagnetic Levitation Guide for Use in Ultra‐Precision Milling Centres, 4th CIRP Global Web Conference on Production Engineering, 29.09. - 01.10.2015, Cranfield, England, 15 Seiten.
-
(2015): Fluiddynamic planar drive with unrestrained rotational degree of freedom, 4th CIRP Global Web Conference on Production Engineering, 29.09. - 01.10.2015, Cranfield, England, 13 Seiten.
-
(2015): Design of an active damping system for Vibration control of disk-shaped tools, 3rd International Conference on Stone and Concrete Machining, 02. - 03.11.2015, Bochum, 21 Seiten.
-
(2015): Simulationsbasiertes Verfahren zur Optimierung von regenerativen Werkzeugschleifprozessen, 18. Anwendungsbezogener Workshop zur Erfassung, Modellierung, Verarbeitung und Auswertung von 3D-Daten, 03.12.2015, Berlin-Adlershof, 20 Seiten.
-
(2015): Industry 4.0, CFK-Valley Stade Convention, 16.06.2015, Stade, 37 Seiten.
-
(2015): Wear mechanisms in grinding of PCBN, 18th International Symposium on Advances in Abrasive Technology, 04. - 07.10.2015, Jeju, Korea, 15 Seiten.
-
(2015): Schleifscheibenherstellung am IFW , 12. Hanser Schleiftagung, 10. - 11.02.2015, Stuttgart-Fellbach, 6 Seiten.
-
(2015): Inverse Determination of Constitutive Equations and Cutting Force Modelling for Complex Tools Using Oxley's Predictive Machining Theory , 15th CIRP Conference on Modelling of Machining Operations, 12.06.2015, Karlsruhe, 19 Seiten.
-
(2015): Werkzeugentwicklung für die Zerspanung innovativer Leichbaustähle, 6. Wernesgrüner Werkzeugsymposium, 12.03.2015, Wernesgrün, 19 Seiten.
-
(2015): New Simulation based Method for the Design of Cut-Off Grinding Segments for Circular Saws, 3rd International Conference on Stone and Concrete Machining, 02. - 03.11.2015, Bochum, 24 Seiten.
-
(2015): Analyse der Schleifmechanismen mittels Schnittunterbrechung, 12. Hanser Schleiftagung, 10. - 11.02.2015, Stuttgart-Fellbach, 6 Seiten.
-
(2015): Increasing the efficiency of milling titanium, DMG MORI Hausausstellung, 05.02.2015, Pfronten, 28 Seiten.
-
(2015): Simulationsunabhängige Kontaktflächenberechnung für das kontinuierliche Wälzschleifen, GETPRO-Kongress, 26.03.2015, Würzburg, 16. Seiten.
-
(2015): Internally Cooled Toric Tools for Grinding of Medical Ceramics , 18th International Symposium on Advances in Abrasive Technology, 04. - 07.10.2015, Jeju, Korea, 14 Seiten.
-
(2015): Influence of diamond wire pretension on process behaviour, 3rd International Conference on Stone and Concrete Machining, 02. - 03.11.2015, Bochum, 26 Seiten.
-
(2015): Influence of the cutting tool compliance on the workpiece surface shape in face milling of workpiece compounds , 15th CIRP Conference on Modeling of Machining Operations, 11.06.2015, Karlsruhe, 20 Seiten.
-
(2015): Energy efficient machining of Ti-6Al-4V, 65th CIRP General Assembly, 23. - 29.08.2015, Kapstadt, Südafrika, 15 Seiten.
-
(2015): Challenges in machining titanium and aluminum, Walter Aerospace Summit Conference, 30. - 31.03.2015, Mönchengladbach, 32 Seiten.
-
(2015): Approach for Increasing the Resource Efficiency for the Production Process of Titanium Structural Components, Machining Innovations Conference, 18. - 19.11.2015, Garbsen, 17 Seiten.
-
(2015): Enabling an Industrial Robot for Metal Cutting Operations, 15th Machining Innovations Conference for Aerospace Industry, 18. - 19.11.2015, Garbsen, 20 Seiten.
-
(2015): Prediction of surface topography after ball end milling – a matter of tool modelling , CIRP STC-C-Meeting, 19.02.2015, Paris, 15 Seiten.
-
(2015): Tool path adaption for compensation of thermal workpiece deflections based on virtual machining , 4th International Conference on Virtual Machining Process Technology, 02.06.2015, Vancouver, 33 Seiten.
-
(2015): Hybride Oberflächenbehandlung zur Lebensdauersteigerung von Wälzlagern, DGM Werkstoffwoche, 14. - 17.09.2015, Dresden, 21 Seiten.
-
(2015): Prediction of temperature induced shape deviations in dry milling, 15th CIRP Conference on Modelling of Machining Operations, 12.06.2015, Karlsruhe, 16 Seiten.
-
(2015): Prediction of the 3D Surface Topography after Ball End Milling and its Influence on Aerodynamics , 15th CIRP Conference on Modelling of Machining Operations, 11.06.2015, Karlsruhe, 25 Seiten.
-
(2015): Leichtbaustähle für den Antriebsstrang von morgen - Herausforderungen in der spanenden Bearbeitung, 4. VDI-Fachtagung - Stahl- und Gusszerspanung 2015, 21. - 22.10.2015, Nürtingen, 25 Seiten.
-
(2015): Simulation based Reduction of Residual Stress Related Part Distortion, 5th International Conference on Distortion Engineering (IDE), 23. - 25.09.2015, Bremen, 14 Seiten.
-
(2015): Workpiece Shape Deviations in Face Milling of Hybrid Structures , 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, 01. - 03.07.2015, Wien, 21 Seiten.
-
(2015): Heat generation during cutting of bone, 49th Annual Conference of the German Society for Biomedical Engineering (DGBMT), 16. - 18.09.2015, Lübeck, 18 Seiten.
-
(2015): Fertigungsinduzierte Eigenspannungen beim Hartdrehen und Festwalzen und deren Veränderungen bei Wälzbeanspruchung, Fachausschuss Eigenspannungen, 29.04.2015, Hannover, 27 Seiten.
-
(2015): Online Monitoring of Automated Fiber Placement Processes by Thermal Imaging , Automated Composites Manufacturing, 24.04.2015, Montreal, 15 Seiten.
-
(2014): Influence of the sintering process parameters on the grinding behavior, International Chemnitz Manufacturing Colloquium ICMC 2104, 8. und 9. April 2014, Chemnitz, 18 Seiten.
-
(2014): Active spindle damping, STC-M, CIRP January Meetings, 22.-24. Januar 2014, Paris, 11 Seiten.
-
(2014): Nutzung des Eigenspannungsabbaus zur Bestimmung der Belastungshistorie spanend gefertigter Bauteile, Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik, Fachausschuss 13 Eigenspannungen, 28.10.2014, 16 Seiten.
-
(2014): Self-Tuning of Teachless Process Monitoring Systems with multi-criteria Monitoring Strategy in Series Production, 2nd International Conference on System-Integrated Intelligence: Challenges for Product and Production Engineering, SysInt 2014, July 2nd, 2014, Bremen, 18 Seiten.
-
(2014): Self-adjusting Process Monitoring System in Series Production , CIRP ICME 2014, 23 - 25 July 2014, Capri, Naples, Italy, 24 Seiten.
-
(2014): Sensor Integration for a Hydraulic Clamping System, 2nd International Conference on System-integrated Intelligence, 3rd of July 2014, Bremen, 11 Seiten.
-
(2014): Simulation based Process Monitoring for Single Item Production without Machine External Sensors, 2nd International Conference on System-Integrated Intelligence: Challenges for Product and Production Engineering, SysInt 2014, July 2nd, 2014, Bremen, 15 Seiten.
-
(2014): Durchlaufzeiten in der Fahrzeuginstandhaltung verkürzen - Potenziale erkennen und umsetzen, Kongress Fahrzeuginstandhaltung, 25.03.2014, München, 45 Seiten.
-
(2014): Microstructure analysis of an aluminum-alloyed UHC-steel and implications for the machinability, CIRP Genral Assembly STC-C, 29.08.2014, Nantes, 17 Seiten.
-
(2014): Zerspanung von Titanlegierungen - Voraussetzungen für das HPC-Fräsen -, DGM-Fortbildungsseminar "Titan und Titanlegierungen", 19. - 20.03.2014, Köln, 41 Seiten.
-
(2014): MATERIAL SPECIFIC CUTTING EDGE GEOMETRIES FOR MACHINING PROCESSES, 11th International Conference on High Speed Machining, September 11 - 12, 2014, Prague, 22 Seiten.
-
(2014): Evaluation of electromagnetic guides in machine tools, International Academy for Production Engineering - 64th General Assembly in Nantes, Frankreich, 24. - 30. August 2014, 15 Seiten.
-
(2014): Workpiece shape deviations in face milling of workpiece compounds, 14th Materials Forum, Hannover Messe 2014, 10. April 2014, Hannover, 19 Seiten.
-
(2014): Schleifen medizintechnischer Keramik, Hanser Schleiftagung, 26. Februar 2014, Stuttgart-Fellbach, 7 Seiten.
-
(2014): Herausforderungen und Fertigungstechnologien bei der Herstellung vollkeramischer Kniegelenksimplantate, Fachforum "Metal meets Medical", Metav, 13.03.2014, Düsseldorf, 43 Seiten.
-
(2014): Energy Efficient Machine Tools and Technologies, ICMTE 2014, 1. Oktober 2014, Jeju, Korea, 30 Seiten.
-
(2014): Leistungssteigerung durch strukturierte Schleifscheibenoberflächen, 11. Hanser Schleiftagung, 26.02. - 27.02.2014, Stuttgart-Fellbach, 6 Seiten.
-
(2014): Development and Manufacturing of Magnesium Interference Screws, CIRP STC-C, 23.01.2014, Paris, Frankreich, 14 Seiten.
-
(2014): Experimental Analysis of Cutting Forces in Actuated Face Milling of Micro Patterns, 2nd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, July, 2nd 2014, Bremen, 18 Seiten.
-
(2014): Process Monitoring with a Force Sensitive Axis-Slide for Machine Tools, 2nd International Conference on System-Integrated Intelligence: Challenges for Product and Production Engineering, 02.07.2014, Bremen, 10 Seiten.
-
(2014): Vererbung in der Arbeitsgruppe Demonstratoren und Datenstrukturen, Workshop: Vererbung in der Technik, Workshop der AG Vererbung, 20.03.2014, Garbsen, 16 Seiten.
-
(2014): Compact XYC fluid planar drive System for micro milling, EUSPEN 2014, 04. Juni 2014, Dubrovnik, 24 Seiten.
-
(2014): Stock-Market Related Price Determination in Consideration of Time Dynamic Cost Factors, 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering, July 23-25 2014, Capri, 9 Seiten.
-
(2014): Eigenspannungen nach der spanenden Rekonturierung von Titanbauteilen mittels Kugelkopffräser, AWT Fachausschuss Eigenspannungen, 28./29. Oktober 2014, Kassel, 28 Seiten.
-
(2014): Data mining approach for knowledge-based process planning, 2nd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, July, 2nd 2014, Bremen 14 Seiten.
-
(2014): Simulation-based planning of production capacity through integrative roadmapping in the wind turbine industry, 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering, July 23-25 2014, Capri, 16 Seiten.
-
(2014): EFFECT OF MANUFACTURING PROCESS INDUCED FIBER WAVINESS ON MECHANICAL PROPERTIES OF COMPOSITE STRUCTURES BY EXAMPLE OF A PREPREG FORMING PROCESS, ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22. - 26. Juni 2014.
-
(2014): Residual stresses in milled Beta-annealed Ti6Al4V, 2nd CIRP Conference on Surface Integrity, May 30th, 2014, Nottingham, 15 Seiten.
-
(2014): Development and Manufacturing of Magnesium Interference Screws, BMT, 08. - 10.10.2014, Hannover, 14 Seiten.
-
(2014): Machining of Magnesium Implants, BMT, October 9th 2014, Hannover, 20 Seiten.
-
(2014): Verschleißsimulation und Prüfung von vereinfachten keramischen Knieimplantatkomponenten, SFB 599, Medizinische Hochschule Hannover, 2014, 11 Seiten.
-
(2014): Hybrid Positioning for Large Laser Cutting Operations of Carbon Fiber Reinforced Plastics, 15th International Conference on Precision Engineering, Kanazawa, Japan, 24 Juli 2014, 17 Seiten.
-
(2014): Model-based Feedback Control via Control Integrated Observers, 15th International Conference on Precision Engineering in Kanazawa, Japan, 24. Juli 2014, 19 Seiten.
-
(2014): Grinding of New Zirconia-based Materials for Medical Applications with Electroplated Diamond Tools, 48th Annual Conference of the German Society for Biomedical Engineering (DGBMT), 08.-10. Oktober 2014, Hannover, 13 Seiten.
-
(2013): Robotics for Geothermal Energy: Approach to Reduce Drilling Costs with a Novel Parallel Kinematic Alignment Tool, Celle Drilling 2013, 9.-10. September 2013, Celle, 14 Seiten.
-
(2013): Ceramic-on-ceramic bearings for Knee Arthroplasty?, IMechE C1387: Knee surgery and rehabilitation, November 11-12 2013, London, 31 Seiten.
-
(2013): Increase of process stability with innovative spindle drives, Neue Fertigungstechnologienin der Luft- und Raumfahrt, 18./19.09.2013, Hannover, 7 Seiten.
-
(2013): Competence-based Process Planning, FAIM '13, Flexible Automation & Intelligent Manufactoring, 23rd International Conference, 26-28 June 2013, Porto, 21 Seiten.
-
(2013): Zerspanung von Titanlegierungen -Voraussetzungen für das HPC-Fräsen-, DMG Seminar Titan und Titanlegierung, 21.03.2013, Köln, 41 Seiten.
-
(2013): Production of titanium structural parts for aeroplanes -Requirements for high performance milling-, Hannover Messe, 12th April 2013, Hannover, 22 Seiten.
-
(2013): Safe machining of Magnesium implants, IMA EHS Seminar, 5th December 2013, Cologne, 26 Seiten.
-
(2013): Challenges and Manufacturing Strategies in the Production of Ceramic Knee Implants, International Conference on Biomedical Technology, 20. November 2013, Hannover, 16 Seiten.
-
(2013): Development of Cutting Tool Geometry for Hard-Milling-Operations, CIRP, August 23rd 2013, Copenhagen, 20 Seiten.
-
(2013): Influence of Laser Ablation on Wear Behaviour of cBN Cutting Inserts, EURO PM 2013, September 16th 2013, Gothenburg, 22 Seiten.
-
(2013): Material removal simulation of wire cutting processes for an adapted tool design, 2nd International Conference on Stone and Concrete Machining, 14.-15.11.2013, Dortmund, 23 Seiten.
-
(2013): Influence of micro patterned grinding wheels on the work piece quality, 13th International Conference of the European Society for Precision Engineering and Nanotechnology, Berlin, 30th May 2013, 14 Seiten.
-
(2013): Mikrostrukturierte Schleifscheiben - Vorstellung aktueller Forschungsarbeiten und Ableitung weiterer anwendungsorientierter Fragestellungen, VDW Arbeitskreis VII Schleiftechnik, Garbsen, 12.03.2013, 11 Seiten.
-
(2013): Modeling of workpiece shape deviations in face milling of parallel workpiece compounds, , 14th CIRP Conference on Modeling of Machining Operations, June 13th 2013, Turin, 18 Seiten.
-
(2013): The influence of machining on residual stresses and corrosion behavior of MgLa2 osteosynthesis plates, BMT-Konferenz, 19. September 2013, Graz, 17 Seiten.
-
(2013): Zerspanung in der Biomedizintechnik - wie der Fertigungsprozess das Patientenwohl beeinflusst, Keynote auf dem 4. Medizintechnischen Kolloquium, 06.11.2013, Tuttlingen, 39 Seiten.
-
(2013): Spanende Bearbeitung von Eisen-Aluminium-Legierungen, Sitzung Fachausschuss Intermetallische Phasen, 10.01.2013, Berlin, 21 Seiten.
-
(2013): Cut-Off Grinding of Natural Stone - Increased Efficiency by Means of Electro-Contact-Discharge-Dressing, 2nd ICSCM 2013, November 14th 2013, 26 Seiten.
-
(2013): Seilschleifen für den Rückbau kerntechnischer Anlagen, KONTEC 2013, 14. März 2013, Dresden, 16 Seiten.
-
(2013): Cutting edge preparation of PCBN inserts, 16th International Symposium on Advances in Abrasive Technology, September 25th 2013, Qiandao Lake, China, 17 Seiten.
-
(2013): Active suppression of chatter vibration with spindle integrated actuators, CIRP, International Academy for Production Engineering, 63rdGeneral Assembly, 18.-24. August 2013 ,Copenhagen, Denmark, 14 Seiten.
-
(2013): Magnetic Guiding for Machine Tools, 10th International Conference on High Speed Machining, September 26th-27th, Darmstadt, 20 Seiten.
-
(2013): Modelling a Thermomechanical NC-Simulation, 14th CIRP Conference on Modelling of Machining Operations, June 13th, 2013, Turin, 17 Seiten.
-
(2013): Trennschleifen – Herausforderungen, Entwicklungen und Perspektiven , European Grinding Conference 2013 (ECG), 27.-28.11.2013, Bremen, 27 Seiten.
-
(2013): Significance of Residual Stress in PVD-Coated Carbide Cutting Tools, CIRP, 63rd General Assembly, August 18-24, 2013, Copenhagen, 29 Seiten.
-
(2013): Analysis of an integrated electromagnetic actuator prototype, Innovative Small Drives and Micro-Motor Systems - 9. GMM/ETG-Fachtagung 19.09. - 20.09.2013, Nürnberg, 5 Seiten.
-
(2013): In-vitro-Studie zum Korrosionsverhalten von Osteosyntheseplatten aus Magnesium und dem daraus resultierenden Verlust der Biegefestigkeit, Biomechanikkongress, 15.-17.05.2013, Neu-Ulm, 1 Seite.
-
(2013): Feasibility of ceramic-on-ceramic Total Knee Arthroplasty under daily and worst-case loading conditions – A Finite Element study, ICBT (Biomedical Technology), November 20-22, 2013, Hannover, 21 Seiten.
-
(2013): Wear behavior of ceramic-on-ceramic pairings under simplified knee joint conditions, Orthopaedic Research Society (ORS), Annual Meeting 2013, 26.-29. January, San Antonio, TX, 1 Seite.
-
(2012): Saving of Energy Consumption by Reducing Raw Material and Process Optimizing of an Industrial Forged Crankshaft, International Symposium on Green Manufacturing and Applications (ISGMA 2012) August 28th, 2012, Ramada Plaza Jeju Hotel, Jeju Island, Korea, 18 Seiten.
-
(2012): Standardized Communication in Simulation of Interacting Machine Tool Components, 19th ISPE International Conference on Concurrent Engineering Trier, September 5th 2012, 12 Seiten.
-
(2012): Development of a Calorimeter to Determine the Chip Heat in Drilling of C45EN, 15th ESAFORM Conference, March 15th, Erlangen, 10 Seiten.
-
(2012): Herstellung und Optimierung der Schneidkantengeometrie für die Dreh- und Fräsebearbeitung, VDI-Fachausschuss, Schneidstoffanwendung, 13.04.2012, Ettlingen, 34 Seiten.
-
(2012): Steigerung der Leistungsfähigkeit von Zerspanwerkzeugen durch anwendungsspezifische Schneidkantenpräparation, Wernesgrüner Werkzeugsymposium, 03. Februar 2012, Treuen, 32 Seiten.
-
(2012): ENμA Energieautarke μ-Systeme in Werkzeugmaschinen, BMBF-Statusseminar, 06.02.2012, Berlin, 23 Seiten.
-
(2012): Kinematic and Stochastic Surface Topography of Machined TiAI6V4-Parts by means of Ball Nose End Milling, 1st CIRP Conference on Surface Integrity (CSI), Bremen, January 30th, 2012, 6 Seiten.
-
(2012): Prozess- und wertschöpfungsorientiert gesteuerte Werkzeugmaschine, Gemeinsame Abschlusspräsentation der Projekte NCplus+, 6. Dezember 2012, Bad Buchau, 20 Seiten.
-
(2012): Digital Factory and Agent based Manufacturing Execution System. An approach for a combined planning and control system for complex production logistics, 1st Joint Symposium on System-Integrated Intelligence "New Challenges for Product and Production Engineering", SysInt 2012, June 27, 2012, Hannover, 13 Seiten.
-
(2012): Dexterous Regeneration Cell for the Repair of Aircraft Engine Components, New Manufacturing Technologies in the Aerospace Industry, 14.- 15.11.2012, 24 Seiten.
-
(2012): Adaptive Cutting Force Control on a Milling Machine with Hybrid Axis Configuration, 3rd CIRP Conference on Process Machine Interactions Nagoya, 30.10.2012, 21 Seiten.
-
(2012): Hochleistungszerspanung in der Luftfahrtindustrie oder - Alle Aluminium- und Titanlegierungen fliegen hoch -, November der Wissenschaft, 27.11.2012, 45 Seiten.
-
(2012): Zerspanung von Titanlegierungen. Voraussetzungen für das HPC-Fräsen, DGM-Seminar Titan und Titanlegierungen, 22. März 2012, Köln, 55 Seiten.
-
(2012): Active Tailstock for Precise Alignment of Precision Forged Crankshafts during Grinding, 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering, July 19th 2012, 24 Seiten.
-
(2012): Werkzeugmaschinen - Wege zur Energieeffizienz, Mehr Energieeffizienz! Metallbearbeitung |Werkzeugbau, 23. Mai 2012, Detmold, 24 Seiten.
-
(2012): Efficient Machining of Micro Dimples for Friction Reduction, 7th International Conference on MicroManufacturing (ICOMM 2012), March 12, 2012, Evanston, IL, USA, 17 Seiten.
-
(2012): Energieeffizientere Motoren durch spanend hergestellte Mikrostrukturen in Zylinderlaufbuchsen, IFW Ehemaligenverein Seminar 2012, Garbsen, 16.11.2012, 24 Seiten.
-
(2012): Simulation based parameterization for process monitoring of machining operations, CIRP ICME '12-8th CIRP Conference on Intelligent computation in manufacturing engineering, Innovative and Cognitive Production Technology and Systems, 18-20 July 2012, Ischia (Naples), Italy, 11 Seiten.
-
(2012): Grinding of Riblet Structures on Free Formed Compressor Blades, 2. WGP Jahreskongress, June 27th, Berlin, 16 Seiten.
-
(2012): High-Performance Cutting of Micro Patterns, CIRP HPC 2012, Zurich, June 4th 2012, 19 Seiten.
-
(2012): Investigations on the influence of grinding wheel manufacturing on process performance, 62th General Assembly, 24.08.2012, Hong Kong, 18 Seiten.
-
(2012): Energieeffizienz in der Zerspanung, 3rd Machining Innovations Conference, November 14th 2012, Garbsen, 21 Seiten.
-
(2012): Influence of the Honed Cutting Edge on Tool Wear and Surface Integrity in Slot Milling of 42CrMo4 Steel, CIRP HPC, June 5th 2012, Zürich, 18 Seiten.
-
(2012): 5-Axis Manufacturing Strategies for Low Wear Ceramic Knee Implants, 1st International Conference on Design and Processes for Medical Devices (PROMED), May 3rd, 2012, Brescia, Italy, 16 Seiten.
-
(2012): Operational planning of maintenance measures by means of event-driven simulation, The 45th CIRP Conference on Manufacturing Systems (CMS 2012), May 16-18, 2012, Athens, Greece, 19 Seiten.
-
(2012): Sensory Z-Slide for Machine Tools, 1st Joint International Symposium on System-Integrated Intelligence 2012: New Challenges for Product and Production Engineering (SysInt 2012), June 27, 2012, 10 Seiten.
-
(2012): Novel Piezo-Hydraulic Micro-Positioning System to Accomplish Precise Positioning Challenges, ACTUATOR 2012, 13th International Conference on New Actuators, 18-20 June 2012, Bremen, S. 309-312.
-
(2012): Compact 2-DOF planar direct drive system with magnetic guidance, CIRP January Meeting, January 27, 2012, Paris, France, 14 Seiten.
-
(2012): Time-Dynamic and Stock-Market Related Pricing Mechanism for the Tool and Mould Manufacturing Industry, CIRP ICME, 19th April 2012, Ischia (Italy), 13 Seiten.
-
(2012): Advanced machining and accessing of information by means of gentelligent micro patterns, 1st Joint Symposium on System-integrated Intelligence: New Challenges for Product and Production Engineering (SysInt), June 28th, 2012, Garbsen, 27 Seiten.
-
(2012): Advanced machining and accessing of information by means of gentelligent micro patterns, 1st Joint Syuposium on System Integrated Intelligence: New Challenges for Product and Production Engineering. (Sysint 2012), 14 Seiten.
-
(2012): Advanced machining and accessing of information by means of gentelligent micro patterns, 1st Joint Symposium on System-Integrated Intelligence "New Challenges for Product and Production Engineering", SysInt 2012, June 28th 2012, Hannover, 27 Seiten.
-
(2012): Electro contact discharge dressing of cut- off grinding disks for natural stone machining, Global Stone Congress, 2012, Borba, July 16, 2012, 16 Seiten.
-
(2012): Analysis of a Piezo-Hydraulically Actuated Fixing Plate for High Precision Positioning, Mechatronics Forum, 18. September 2012, Hannover, 19 Seiten.
-
(2012): Analysis of a Piezo-Hydraulically Actuated Fixing Plate for High Precision Positioning, 13th Mechatronics Forum International Conference, Linz, Austria, 19 Seiten.
-
(2012): A qualitiy-oriented approach to product-driven production, 1st Joint International Symposium on System-Integrated Intelligence 2012: New Challenges for Product and Production Engineering (SysInt 2012), June 28, 16 Seiten.
-
(2012): Zerspanung von Kupferlegierungen - Spanabhebende Verfahren: Übersicht, Fortbildungsseminar ''Zerspanung von Kupferwerkstoffen'', 13.-14. November 2012, Frankfurt am Main, 35 Seiten.
-
(2012): System-Integrated Intelligence: New Challenges for Product and Production Engineering, 1st Joint International Symposium on System-Integrated Intelligence 2012 (SysInt 2012), Hannover, June,27th-29th, 10 Seiten.
-
(2012): A study on the heat losses reduction for the in-line induction heating system, International Symposium on Green Manufacturing and Applications (ISGMA 2012) August 27-29, 2012, Ramada Plaza Jeju Hotel, Jeju Island, Korea, 1 Seite.
-
(2011): Model Based Optimization of Forging Process Chains by the Use of a Genetic Algorithm., 10th ICTP 2011, 26th of September, 2011, Aachen, 18 Seiten.
-
(2011): Herstellung und Optimierung der Schneidkantengeometrie für die Dreh- und Fräsbearbeitung., Begleitband zum Seminar "Werkzeuge für die Zerspanung", 16. Februar 2011, Institut für Fertigungstechnik und Werkzeugmaschinen, Garbsen, 36 Seiten.
-
(2011): Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load. , 61th CIRP General Assembly, August 23th, 2011, Budapest, Hungary, 30 Seiten.
-
(2011): Optimization of non-cutting tool paths., 13th CIRP Conference on Modelling of Machining Operations, 13th May 2011, Sintra, Portugal, 12 Seiten.
-
(2011): Entwicklung kombinierter Fertigungstechnologien für hochfeste Strukturbauteile. , 8. Industriekolloquium, Abschlusskolloquium SFB 675, 2./3. November 2011, Clausthal-Zellerfeld, 15 Seiten.
-
(2011): Ascertainability of Coated Micro Patterns., 9th International Conference THE "A" Coatings in Manufacturing Engineering, October 3rd, 2011, Thessaloniki, Greece, 22 Seiten.
-
(2011): Cohesive Damage of PVD-Coated Cuting Tools - A Result of the Residual Stress Distribution., 9th International Conference THE "A" Coatings in Manufacturing Engineering, October 3rd, 2011, Thessaloniki, 23 Seiten.
-
(2011): Konstrukteur 2020 - Projektergebnisse der empirischen Studiengangsanalyse., 1. projektbegleitender acatech Workshop, 27.09.2011, Karlsruhe, 15 Seiten.
-
(2011): Process Force Prediction in Orbital Drilling of Ti-64., 9th International Conference on Advanced Manufacturing Systems and Technology (AMST'11), June 16th, 2011, Mali Losinj, 14 Seiten.
-
(2011): Determination of Geometry Deviation in Continuous Path Controlled OD Grinding Processes., 13th CIRP Conference on Modelling of Machining Operations, May 12-13, 2011, Sintra, Portugal, 13 Seiten.
-
(2011): Precise Alignment of Precision Forged Crankshafts in a Grinding Machine., 11th International Conference of the European Society for Precision Engineering & Nanotechnology, 23rd-27th May 2011, Lake Como, Italy, 26 Seiten.
-
(2011): Grinding of Steel-Ceramic-Composites., Fachmesse EMO Hannover 2011, September 21th, Hannover, 16 Seiten.
-
(2011): Grinding of Microstructures., Fachmesse EMO Hannover 2011, September 20th, Hannover, 16 Seiten.
-
(2011): Adaptive Process Chain Optimisation of Manufacturing Systems. , 4th International Conference on Changeable, Agile, Reconofigurable and Virtual Production (CARV 2011), 2-5 October 2011, Montreal, Canada, 15 Seiten.
-
(2011): Tool Concepts for Wire Cutting of Reinforced Concrete, 1st International Conference on Stone and Concrete Machining, November 23rd, 2011, Hannover, 25 Seiten.
-
(2011): Wire Cutting Tool Concepts for Steel Machining., 14th International Symposium of Advances in Abrasive Technology (ISAAT 2011), September 20th, Stuttgart, 14 Seiten.
-
(2011): Machining induced influence on the subsurface of milled aerospace parts., New manufacturing technologies in aerospace industry : proceedings / Machining Innovations Conference, September 23rd 2011 in Hannover at the EMO, S. 274-283.
-
(2011): Grinding of Steel-Ceramic-Composites., 14th International Symposium of Advances in Abrasive Technology (ISAAT 2011), September 20th, 2011, Stuttgart, 15 Seiten.
-
(2011): 5-Axis Grinding of Micro-Patterns with Adjusted Grinding Wheels. , 26th Annual Meeting of the American Society for Precision Engineering (ASPE), November 17th, 2011, Denver, 14 Seiten.
-
(2011): Design and machining of resorbable interference screws., SFB 599 Colloquium 2011 "The Modular Man", October 14th - 15th 2011, Hannover, 14 Seiten.
-
(2011): Ball End Milling of Regenerated Turbine Blades., January Meeting of CIRP, 26.-28.01.2011, Paris, 12 Seiten.
-
(2011): Randzonenbeeinflussung bei der Zahnfußbearbeitung durch kontiniuierliches Wälzschleifen., Arbeitskreis Verzahntechnik VDW, 06.10.2011, Frankfurt am Main, 18 Seiten.
-
(2011): Eingriffsverhältnisse bei der Zahnfußbearbeitung durch kontinuierliches Wälzschleifen., Kongress zur Getriebeproduktion, 30.03.2011, Congress Centrum Würzburg, 24 Seiten, 2011.
-
(2011): Prozessentwicklung für den Einsatz der Seilschleiftechnologie im Rückbau kerntechnischer Anlagen., KONTEC 2011, 10. Internationales Symposium "Konditionierung radioaktiver Betriebs- und Stilllegungsabfälle", 06.04.2011, Dresden, 25 Seiten.
-
(2011): High Performance Processes in Aerospace Industry. , 16° Seminário Internacional de Alta Technologia, October 6th, 2011, Universidade Metodista de Piracicaba, Piracicaba, 32 Seiten.
-
(2011): Integrated planning and control of maintenance and production., The 44th CIRP Conference on Manufacturing Systems, June 3rd, 2011, Madison, Wisconsin, USA, 20 Seiten.
-
(2011): Simulation of Process Induced Part Distortion for Milling of Aircraft Components, 3rd International Conference on Distortion Engineering (IDE 2011), September 16, 2011, Bremen, 20 Seiten.
-
(2011): Simulation of Process Induced Part Distortion for Milling of Aircraft Components., New manufacturing technologies in aerospace industry : proceedings / Machining Innovations Conference, September 23rd 2011 in Hannover at the EMO, S. 318-330.
-
(2011): Simulation Based Detailed Planning for Agile Manufacturing., 4th International Conference on Changeable, Agile, Reconofigurable and Virtual Production (CARV 2011), 2-5 October 2011, Montreal, Canada, 18 Seiten.
-
(2011): Angepasste Werkzeuggeometrie für die Hartzerspanung., VDI-Tagung, Stahl- und Gußzerspanung, 12. Oktober 2011, Nürtingen, 30 Seiten.
-
(2011): Machining of Iron-Aluminum Alloys, 9th International Conference on Advanced Manufacturing Systems and Technology (AMST'11), June 16-17, 2011, Mali Losinj, Croatia, 18 Seiten.
-
(2011): Spanende Bearbeitung von FeAl-Legierungen. , 19. Sitzung des Fachausschusses Intermetallische Phasen (FA-IP) der DGM, 08. Februar 2011, TU Dresden, 27 Seiten.
-
(2011): Turning and Grinding of Iron-Aluminium Alloys., FeAl2011: Discussion Meeting on the Development of Innovative Iron-Aluminuim Alloys, October 5th, 2011, Lanzarote, 30 Seiten.
-
(2011): Innovative Cutting Edge Geometry for Hard Turning., Fachmesse EMO Hannover 2011, September 22nd, 17 Seiten.
-
(2011): ENμA Energieautarke μ-Systeme in Werkzeugmaschinen., BMBF-Statusseminar, 14.02.2011, Berlin, 24 Seiten.
-
(2011): Integrated active damping of main spindles., 61th CIRP General Assembly, August 26th, 2011, Budapest, Hungary, 16 Seiten.
-
(2011): Effizienzpotentiale durch innovative Antriebs- und Steuerungskonzepte., 3. FMB-Mittelstandskongress, 09. November 2011, Bad Salzuflen, 31 Seiten.
-
(2011): NEXIMO - Next Innovative Machine Tool., VDI FA Schneidstoffanwendungen, 8. November 2011, Schmalkalden, 14 Seiten.
-
(2011): Design of an Aerostatic Linear Direct Drive, CIRP January Meetings 2011, 26-28 January, Paris, 20 Seiten.
-
(2011): Neuartiger Gelenkmechanismus für eine multifunktionale Knieexartikulationsprothese., Konferenz "metal meets MEDICAL", 17. März 2011, Karlsruhe, 31 Seiten.
-
(2011): Data storage by means of micro patterned surfaces., Fachmesse EMO Hannover 2011, 23. September, Hannover, 11 Seiten.
-
(2011): Influence of Iron-Aluminides Grain Size Adjusted by Forging and Heat Treatment on Machining. , FeAl2011: Discussion Meeting on the Development of Innovative Iron-Aluminuim Alloys, October 5th, 2011, Lanzarote, October 5th, 2011, Lanzarote, 15 Seiten.
-
(2011): Machining of Iron-Aluminum Alloys, European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2011), September 13, 2011, Montpellier, France, 18 Seiten.
-
(2011): Fully ceramic knee implants - Challenges and solutions concering machining processes., CRC-Colloquium 2011, October 14th, Hannover, 2011, 7 Seiten.
-
(2011): Fingerprints for Machines - Optical Identification of Grinding Imprints., DAGM Conference 2011, 33rd Annual Symposium of the German Association for Pattern Recognition, August 30th-September 2nd, 2011, Frankfurt am Main, 25 Seiten.
-
(2011): Velocity Effects in Metal Forming and Machining Processes., 61th CIRP General Assembly, August 22, 2011, Budapest, Hungary, 33 Seiten.
-
(2011): Design of Folded Tubulars for Expandable Casing Applications., Celle Drilling 2011, 13.09.2011, Celle, 23 Seiten.
-
(2010): W5: Werkstoff, Schweiß- und Bearbeitungstechnik beim Tiefbohren. Prozessauslegung und Kraftmodellierung beim Drehen., Jour fixe Werkstoffe, Projekt gebo W5, 05.11.2010, Celle, 13 Seiten.
-
(2010): W6: Konstruktionen gefalteter Rohre zur Bohrlochauskleidung., Jour fixe Werkstoffe, Projekt gebo W6, 05.11.2010, Celle, 16 Seiten.
-
(2010): Determination of Static and Dynamic Deflections in Tool Grinding using a Dexel-Based Material Removal Simulation. , 2nd CIRP International Conference on Process Machine Interactions, June 10-11, 2010, Vancouver, 21 Seiten.
-
(2010): Tailored Cutting Edge Preparation., 8th International Conference "THE Coatings" in Manufacturing Engineering, April 14, 2010, Erlangen, 29 Seiten.
-
(2010): Abschlussveranstaltung: Zustandsbasierte Instandhaltungsplanung und -steuerung., Abschlussveranstaltung BMBF-Projekt "Make-it-Maschinenzustandsbasierte Verfügbarkeitsdienstleistung für hochproduktive Fertigungsanlagen", DMG-Hausmesse Leonberg (Stuttgart), 28. April 2010, 23 Seiten.
-
(2010): Process and Tool Design for High Speed Cutting of Granite. , Global Stone Congress 2010, 3rd March 2010, Alicante, Spain, 14 Seiten.
-
(2010): Pre PVD-Coating Processes and Their Effect on Substrate Residual Stress in Carbide Cutting Tools. , 8th International Conference "THE Coatings" in Manufacturing Engineering, April 14, 2010, Erlangen, 25 Seiten.
-
(2010): Contact Conditions in 5-Axis-Grinding of Double Curved Surfaces with Toric Grinding Wheels., ISAAT 2010: The 13th International Symposium on Advances in Abrasive Technology & The 1st Cross-Strait Conference on Precision Machining, September 20st, 2010, Taipei, Taiwan, 22 Seiten.
-
(2010): Machining Micro Structures by Cutting and Grinding., Topical Meeting: Structured and Freeform Surfaces, February 10th, 2010, Aachen, 26 Seiten.
-
(2010): Machining induced residual stresses in light metals., CIRP January Meetings, January 20, 2010, Paris, 14 Seiten.
-
(2010): Process Influences in the Wire Cutting of Concrete., ISAAT 2010: The 13th International Symposium on Advances in Abrasive Technology & The 1st Cross-Strait Conference on Precision Machining, September 20st, 2010, Taipei, Taiwan, 19 Seiten.
-
(2010): Zirkularfräsen von CFK-Titan Stacks., Werkstoffforum "Intelligenter Leichtbau", 22. April 2010, Hannover, 23 Seiten.
-
(2010): AGILITA - Agile Produktionslogistik und Transportanlagen., Fachforum Autonomik: Intelligente Werkzeuge und Systeme für die autonome Fabrik der Zukunft, 22. April 2010, Hannover Messe Industrie, 14 Seiten.
-
(2010): Multi-Sensor Disturbance Force Measurement for Compliant Mechanical Structures., The 9th Annual IEEE Conference on Sensors, November 4th, 2010, Waikoloa, USA, 10 Seiten.
-
(2010): Advanced Microstructures and its Production through Cutting and Grinding., 60th CIRP General Assembly, August 24th, 2010, Pisa, Italy, 25 Seiten.
-
(2010): Spanende Mikrostrukturierung funktionaler Oberflächen. , Seminar Werkzeuge für die Zerspanung, 11. Februar 2010, Hannover, 37 Seiten.
-
(2010): Ressourceneffiziente Zerspanung durch anwendungsspezifische Schneidkantenpräparation., Neue Fertigungstechnologien in der Luft- und Raumfahrt, 24. November 2010, Garbsen, 34 Seiten.
-
(2010): Werkzeugentwicklung für die Zerspanung von Titanlegierungen., VDI-Fachausschuss "Schneidstoffanwendung", 14. April 2010, Garbsen, 44 Seiten.
-
(2010): Form deviation in machining of spheroidal cast iron and aluminum compounds, 8th International Conference on High Speed Machining, December 9, 2010, Metz, 16 Seiten.
-
(2010): Herstellung und Einsatzverhalten von Hartmetallwerkzeugen., Haagener Symposium, 26. 11. 2010, Hagen, 42 Seiten.
-
(2010): Empirical Approach for the Calculation of Machining Forces at Varying Sections of Cut., 60th CIRP General Assembly, August 22-28, 2010, Pisa, Italy, 16 Seiten.
-
(2010): Process Analysis in Cut-Off Grinding of Stone Compund Material. , Global Stone Congress 2010, 3rd March 2010, Alicante, Spain, 13 Seiten.
-
(2010): Gentelligent Production - A New Era of Production Technology., CIRP ICME '10, 7th CIRP International Conference on "Intelligent Computation in Manufacturing Engineering", 23-25 June, 2010, Capri, Italy, 16 Seiten.
-
(2010): Cognitive Process Planning., 43rd CIRP International Conference on Manufacturing Systems "Sustainable Production and Logistics in Global Networks", May 27th, 2010, Vienna, 17 Seiten.
-
(2010): Modifizierte Schneidengeometrien für die Hartbearbeitung., Seminar Werkzeuge für die Zerspanung, 10./11.02.2010, Garbsen, Hannover, 33 Seiten.
-
(2010): Systematische Auswahl von Energiewandlungskonzepten für den Einsatz in Werkzeugmaschinen. , GMM-Workshop "Energieautarke Sensorik 2010", 27. Oktober, 2010, Hamburg, 15 Seiten.
-
(2010): Innovative Components for Microfactories. The , 7th International Workshop on Microfactories (IWMF 2010), 24-27 Oct. 2010, Daejeon, Korea, 53 Seiten.
-
(2010): Active linear guidance systems for mico machines. Design, simulation and experimental results., CIRP January Meetings, 20-23 January 2010, Paris, 14 Seiten.
-
(2010): Abschlussveranstaltung: Maschinenzustandsüberwachung mit Residuen und Notlaufstrategien., Abschlussveranstaltung BMBF-Projekt "Make-it-Maschinenzustandsbasierte Verfügbarkeitsdienstleistung für hochproduktive Fertigungsanlagen", DMG-Hausmesse Leonberg (Stuttgart), 28. April 2010, 24 Seiten.
-
(2010): Application of Abrasive Brushing for the Preparation of Tailored Cutting Edges., 52nd FEIBP Congress, Internationales Treffen der Europäischen Bürsten- und Pinselindustrie, September 16th, Hamburg, 40 Seiten.
-
(2010): Schneidkantenpräparation von Zerspanwerkzeugen. Verfahren zur Präparation und Werkzeug-Einsatzverhalten., Workshop Werkzeugherstellung, Maschinentechnologie und praktische Umsetzung, 19. Oktober 2010, Hannover, 30 Seiten.
-
(2010): Planung und Überwachung spanender Fertigungsprozesse auf Basis von Werkstück- und Fertigungsinformationen. , Kolloquium des SFB 653 "Gentelligente Bauteile im Lebenszyklus - Nutzung vererbbarer, bauteilinhärenter Informationen in der Produktionstechnik", 04. Oktober 2010, Garbsen, 13 Seiten.
-
(2010): Assessing Manufacturing Costs of Mould Cavities Using Accessibility Analysis., CIRP ICME '10, 7th CIRP International Conference on "Intelligent Computation in Manufacturing Engineering", June 24, 2010, Capri, Italy, 10 Seiten.
-
(2010): High Speed Process Damping in Milling., 4th CIRP International Conference on High Performance Cutting, HPC 2010, October 25, 2010, Nagaragawa Convention Center, Gifu, Japan, 12 Seiten.
-
(2009): Calculating the Deflection of a Twist Drill during the Flute Grinding Process using a Beam Model with Changing Moments of Inertia., 3rd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, September 22, 2009, Hannover, 22 Seiten.
-
(2009): Entwicklung kombinierter Fertigungsverfahren für hochfeste Strukturbauteile., 7. Industriekolloquium "Potenziale metallischer Werkstoffe lokal nutzen", Sonderforschungsbereich 675, 25. und 26. November 2009, Clausthal-Zellerfeld, 19 Seiten.
-
(2009): Burr Formation in Microstructuring Processes., CIRP International Conference on Burrs, April 2nd 2009, Kaiserslautern, 10 Seiten.
-
(2009): Cutting Edge Preparation for Cemented Carbide Milling Tools. , Advances in Abrasive Technology XII: 12th International Symposium on Advances in Abrasive Technology (ISAAT2009), September 29th, 2009, Gold Coast Australia, 22 Seiten.
-
(2009): Influence of Machining Parameters and Tool Geometry on the Quality of Information Carrying Microstructures. , ASPE 24th Annual Meeting, October 8th, 2009, Monterey, California, 19 Seiten.
-
(2009): Flexible Polishing with Bonded Grains for Complex Ceramic Endoprostheses., ASPE 24th Annual Meeting, October 7th, 2009, Monterey, California, 18 Seiten.
-
(2009): Diamond Tools for the Grinding of Complex Ceramic Implant Surfaces., Advances in Abrasive Technology XII: 12th International Symposium on Advances in Abrasive Technology (ISAAT2009), September 28th, 2009, Gold Coast, Australia, 28 Seiten.
-
(2009): Burr Formation and Removal at Profile Grinding of Riblet Structures., CIRP International Conference on Burrs, April 2nd 2009, Kaiserslautern, 9 Seiten.
-
(2009): Residual stress and part distortion in milled aerospace aluminium., CIRP, August 28, 2009, Boston, 13 Seiten.
-
(2009): Komplexe Bauteile erfordern innovative Bearbeitungstechnologien., 6. Schleiftagung 2009, 17. Februar 2009, Fellbach bei Stuttgart, 34 Seiten.
-
(2009): Modeling of Kinematics and Uncut Chip Geometry in Helical Milling., Proceedings of the 12th CIRP Conference on Modelling of Machining Operations, May 7-8, 2009, Donostia-San Sebastián, Spain, 22 Seiten.
-
(2009): Feature based approach for partial automatic generation of process sequencies., 5th I*PROMS Virtual International Conference on Innovative Production Machines and Systems, July 6th-14th, 2009, Cardiff, UK, 16 Seiten.
-
(2009): Life cycle cost analysis and prognosis model in the aviation industry., 5th I*PROMS Virtual International Conference on Innovative Production Machines and Systems, 6th July, 2009, Cardiff, UK, 20 Seiten.
-
(2009): Technologiebewertung mittels Lebenszykluskostenanalyse. , 5. Symposium für Vorausschau und Technologieplanung, 19. November 2009, Berlin-Brandenburgische Akademie der Wissenschaften, 17 Seiten.
-
(2009): Residual Stress in PVD-Coated Carbide Cutting Inserts - Applications of the sin2psi and the Scattering Vector Method., THERMEC 2009, August 25, 2009, Berlin, 20 Seiten.
-
(2009): Schlüsselkomponenten und zweistufiges Sicherheitskonzept für die Mensch-Roboter-Kooperation: koSePro., 5. Workshop für OTS-Systeme in der Robotik, 3. Fraunhofer IPA Workshop, 15. Juni 2009, Stuttgart, 44 Seiten.
-
(2009): Static and dynamic stabilisation of a milling process by an adaptronic spindle system., Adaptronic Congress, 19 May 2009, Berlin, 8 Seiten.
-
(2009): Holistic Process Chain Optimisation based on Simulation of Techological Interfaces., 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), October 5th-7th, 2009, Munich, 19 Seiten.
-
(2009): Agile Planning for Gentelligent Production., 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), October 5th-7th, 2009, Munich, 28 Seiten.
-
(2009): Model-based Dimensioning of Multistage Processes Regarding Multple Criteria., 6th CIRP International Conference on DET, 14th-16th December 2009, 24 Seiten, 2009.
-
(2009): Größeneinflüsse auf die Spanbildung und die Randzone bei der Hartbearbeitung., Abschlusskolloquium Prozessskalierung, 12.02.2009, Bonn, 17 Seiten.
-
(2009): Microstructuring of thermomechanically high stressed surfaces., CIRP January Meeting, 30. Januar 2009, Paris, 12 Seiten.
-
(2009): Surface functionalization by means of cutting., euspen Topical Meeting: Structured and Freeform Surfaces, February 2009, Edinburgh, UK, 19 Seiten.
-
(2009): Einfluss der Spanungsquerschnittsform auf die Spanbildung., Abschlusskolloquium Prozessskalierung, 12. Februar 2009, Bonn, 22 Seiten.
-
(2009): Diamantverschleiß bei der Schleifbearbeitung von Stahl-Keramik-Werkstoffverbunden., 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, 1. April 2009, Bayreuth, 11 Seiten.
-
(2009): Einstellung der Randzoneneigenschaften resorbierbarer Magnesiumimplantate durch mechanische Bearbeitung., KOLLOQUIUM 2009, Funktionalisierung von Oberflächen, SFB 599: Zukunftsfähige bioresorbierbare und permanente Implantate aus metallischen und keramischen Werkstoffen, 13. Juni 2009, Medizinische Hochschule Hannover, 2 Seiten.
-
(2009): Potenziale angepasster Schneidengeometrien bei der Hartbearbeitung. , VDI Fachausschusstagung, 19.03.2009, Frickenhausen, 26 Seiten.
-
(2009): Zustandsorientierte Instandhaltungsplanung und -steuerung. , Tagung "Technische Zuverlässigkeit 2009: Entwicklung und Betrieb zuverlässiger Produkte", 30. April 2009, Leonberg, 36 Seiten.
-
(2009): Hochdynamische Werkzeugmaschine mit innovativen impulsentkoppelten Vorschubachsen., 14. Dresdner Werkzeugmaschinen-Fachseminar, "Lineardirektantriebe in Werkzeugmaschinen", 4. Dezember 2009, 25 Seiten.
-
(2009): Innovative High Speed Machine Tool with Energy-optimized Jerk-decoupling Technology., 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, LAMDAMAP 2009, June 30th, 2009, Brunel University, West London, UK, 18 Seiten.
-
(2009): Lebenszyklusorientierung bei Werkzeugmaschinen., Informationstag: LCC, Umsetzung in der Praxis, 17. März 2009, Frankfurt, 53 Seiten.
-
(2009): Multifunktionale Leichtbau-Prothese., WING-nano.DE 2009, Werkstoff- und Nanotechnologien: "Rohstoff" für Innovationen, 1.-3. April 2009, Ulm, 1 Seite.
-
(2009): Einfluss der Werkzeuggeometrie auf die Prozesstabilität beim Fräsen., Neue Fertigungstechnolgien in der Luft- und Raumfahrt, Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover, 24. November 2009, 37 Seiten.
-
(2009): Characteristic Values for Continuous Generating Grinding of Gears., Thirty-Seventh North American Manufacturing Research Conference, NAMRC 37, May 19-22, 2009, Greenville, South Carolina, USA, 20 Seiten.
-
(2009): Potenziale angepasster Schneidengeometrien bei der Hartbearbeitung., GETPRO, Kongress zur Getriebeproduktion, 11./12. März 2009, Congress Centrum Würzburg, 27 Seiten.
-
(2008): Inlineformerfassung durch helligkeitsangepasste Streifenprojektion., 11. Anwendungsbezogener Workshop zur Erfassung, Modellierung, Verarbeitung und Auswertung von 3D-Daten "3D-NordOst 2008", 12. Dezember 2008, Berlin, 25 Seiten.
-
(2008): Virtual Machine Tool - A Case Study on Virtual Operator Training., 4th I*PROMS Virtual International Conference "Innovative Production Machines and Systems", Cardiff, UK, July 1st-14th, 2008, 13 Seiten.
-
(2008): Schneidkantenpräparation. Herstellungsmethoden und Charakterisierung von Schneidkantenmikrogeometrien., TechForum Tools, 16. September 2008, Saint-Gobain Diamantwerkzeuge Norderstedt, 33 Seiten.
-
(2008): Preparation of Tailored Cutting Edge Microgeometries. 5-Axes Brushing., 3rd International Conference on Manufacturing Engineering (ICMEN) and EUREKA Brokerage Event, 1-3 October 2008, Kallithea of Chalkidiki, Greece, 30 Seiten.
-
(2008): Stress Depth Distributions in Uncoated, PVD Coated and Decoated Carbide Cutting Tools. , 7th International Conference "THE Coatings" in Manufacturing Engineering and EUREKA Partnering Event, 1-3 October 2008, Kallithea of Chalkidiki, Greece, 21 Seiten.
-
(2008): Werkzeug- und Prozessauslegung für die Hochgeschwindigkeitsbearbeitung von Granit., 6. IFW-Steinkolloquium: Entwicklungen in der Naturstein- und Bauwerkstoffbearbeitung, 12. und 13. November 2008, Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover, 9 Seiten.
-
(2008): Performance Enhancement in Milling Titanium., 3rd International CIRP High Performance Cutting Conference (HPC), June 13th, 2008, Dublin, Ireland, 12 Seiten.
-
(2008): Machining induced residual stress in wrought aluminium parts. , Proceedings of 2nd International Conference on Distortion Engineering, IDE 2008, 17-19 September, Bremen, Germany, 23, Seiten.
-
(2008): Analyzing the machinability of nacre Reference for implant material., International Symposium on Friction, Wear and Wear Protection, 9th April 2008, Aachen, 18 Seiten.
-
(2008): Finishing of Ceramic Implant Surfaces., Material Science and Engineering, 1.-4. September 2008, Nürnberg, 17 Seiten.
-
(2008): Vorhersage der Eigenspannungen beim Fräsen von Aluminiumstrukturbauteilen., Neue Fertigungstechnologien in der Luft- und Raumfahrt, 19. und 20. November 2008, Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover, 43 Seiten.
-
(2008): Machining induced residual stress and distortion in wrought aluminum parts., AMST'08: Advanced Manufacturing Systems and Technology, Eighth International Conference on Advanced Manufacturing Systems and Technology, June 12th, 2008, Udine, 10 Seiten.
-
(2008): An Ontology Aided Process Planning System for Gentelligent Production., 6th CIRP International Conference on ICME, 23-25 July 2008, Naples, Italy, 21 Seiten.
-
(2008): Dimensioning Technological Interfaces and Process Parameters in Manufacturing Process Chains., 6th CIRP International Conference on ICME, 23-25 July 2008, Naples, Italy, 26 Seiten.
-
(2008): Zeilenkameraschnitt. Phasensensitive Musterprojektion mittels Fourierprofilometrie., 11. Anwendungsbezogener Workshop zur Erfassung, Modellierung, Verarbeitung und Auswertung von 3D-Daten "3D-NordOst 2008", 12. Dezember 2008, Berlin, 23 Seiten.
-
(2008): Leistungssteigerung beim Fräsen von Titan., Hahn & Kolb Workshop, 17.04.2008, Institut für Fertigungstechnik und Werkzeugmaschinen, Garbsen, 17 Seiten.
-
(2008): Leistungssteigerung beim Fräsen von Titan durch Werkzeugentwicklung., AMB - Internationale Ausstellung für Metallbearbeitung, 9.-13. September 2008, Stuttgart, 26 Seiten.
-
(2008): Messung und Bewertung des Verschleißverhaltens unterschiedlicher Diamantkorntypen., Fertigungstechnisches Kolloquium "Schleifen im Grenzbereich", 13. November 2008, ETH Zürich, 37 Seiten.
-
(2008): Virtual pilot production in process planning., 4th I*PROMS Virtual International Conference "Innovative Production Machines and Systems", Cardiff, UK, July 1st-14th, 2008, 14 Seiten.
-
(2008): Machining Technologies for Degradable Magnesium Implants., Material Science and Engineering, 1.-4. September 2008, Nürnberg, 24 Seiten.
-
(2008): Condition Monitoring und zustandsorientierte Instandhaltung für lebenszykluskosten-orientierte Werkzeugmaschinen., 7. Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung (AKIDA), 19. November 2008, Aachen, 31 Seiten.
-
(2008): Design and Simulative Investigation of a Piezo-Hydraulic Positioning System. , CIRP General Assembly, Aug. 2008, Manchester, 27 Seiten.
-
(2008): Processing technologies for new nacre-like implant materials., Congress and Exhibition on Advanced Materials and Processes, 1-4 September 2008, Nürnberg, Germany, 1 Seite.
-
(2008): Akustische Prozessanalyse bei der Bearbeitung von Beton., 6. IFW-Steinkolloquium: Entwicklungen in der Naturstein- und Bauwerkstoffbearbeitung, 12. und 13. November 2008, Institut für Fertigungstechnik und Werkzeugmaschinen, Hannover, 10 Seiten.
-
(2008): Temperaturkompensation bei der Trockenbearbeitung., Flexibilität in neuen Dimensionen erleben, System- und Technologietage, 04. Juni 2008, Eislingen/Fils, 15 Seiten.
-
(2008): Steigerung der Prozessstabilität beim Hochleistungsfräsen von hochfesten Aluminiumlegierungen., 2. MATERIALICA Leichtbau-Kongress "Metall Leichtbau durch endkonturnahe Fertigung", 14.-16. Oktober 2008, München, 9 Seiten.
-
(2008): Prozessstabilität ungleich geteilter Werkzeuge., Begleitband zum Seminar "Werkzeuge für die Zerspanung : Entwicklung, Prozesskette, Einsatz", Hannover 13. Februar 2008, Berichte aus dem IFW, Band 3/2008, 23 Seiten.
-
(2008): Adaptronische Spindeleinheit für Fräsmaschinen., 3. Berichtskolloquium des DFG SPP 1156 Adaptronik für Werkzeugmaschinen, 13. Februar 2008, Braunschweig.
-
(2008): Grinding of Microstructured Functional Surfaces - A Novel Strategy for Dressing of Microprofiles on Vitrifed Grinding Wheels., Twenty-third Annual Meeting of the American Society for Precision Engineering and the Twelfth ICPE, October 19 - October 24, 2008, Portland, Oregon, 16 Seiten.