Publikationen – Institut für Fertigungstechnik und Werkzeugmaschinen

Hier finden Sie die Dissertationen des IFW

Zu den Dissertationen

Hier finden Sie die Patente des IFW

Zu den Patenten

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 …

Anzahl der gefundenen Publikationen: 4964

Denkena, B.: (2026): 3D geometry prediction for wall deposition using transfer learning in wire arc additive manufacturing, CIRP Journal of Manufacturing Science and Technology 64 (2026), S. 1–14.
DOI: https://doi.org/10.1016/j.cirpj.2025.11.007

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Schenzel, J.: (2026): Tribomechanical effects of cutting fluids in high-speed cutting, Production Engineering (2026) 20:1, 10 Seiten.
DOI: https://doi.org/10.1007/s11740-025-01392-5

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Heide, K., Eggers, M.: (2026): Analysis on micro-milling of UHMWPE for the integration of radiopaque markers on the surface of TKA inlays, Production Engineering (2026) 20:9, 11 Seiten.
DOI: https://doi.org/10.1007/s11740-025-01401-7

Zeitschriften/Aufsätze (reviewed)

Schlenker, F.: (2026): Simulationsbasierte Planung additiv-subtraktiver Prozessketten, IndustryArena Compentence network for production (2026), published online 19. January 2026, 2 Seiten.

Zeitschriften/Aufsätze

Wulf, M.: (2026): Intelligent Grinding, International Journal of Automation Technology Vol.20 No.1, (2026), S. 57-77.
DOI: https://doi.org/10.20965/ijat.2026.p0057 Beschreibung: <p>Grinding is a process that still today largely depends on the skill and experience of the operator. For grinding, no generalized computer-aided manufacturing tool exists as for milling, and the grinding machine manufacturers have their proprietary process planning tools for the path planning. The success of a grinding process furthermore depends on a suitable conditioning of the grinding wheel and not only on the appropriate selection of the process parameters. Skilled operators are, on the one hand, capable of setting up the process in shorter time than their less skilled colleagues and with immediate success. Artificial intelligence, driven by sufficiently increased computational performance, is increasingly capable of handling manufacturing processes, particularly as these processes become more complicated and experience-based. Therefore, extending the machine’s ability towards what today is the task of the operator, namely process planning feeding the vision of “operator integrated” is a breakthrough in zero defect manufacturing and first part right for grinding processes. The paper conceptualizes an intelligent grinding machine that uses ontologies, applies rule-based planning tools, makes use of physical as well as autonomous modeling, and is capable of learning. Moreover, the processes of grinding and dressing are fully monitored so that a self-learning ability is provided. Learning is fed from different sources, from monitoring, from other machines requiring filters built on physical models, and from the operator with the ability to deal with incomplete, unstructured, and unreliable data. From this the way, how such a machine communicates with operators must be completely different than today. Research results and literature are provided to discuss the different aspects like machine state monitoring, process monitoring, and parameter selection for an optimized grinding process.</p>

Zeitschriften/Aufsätze (reviewed)

Bergmann, B., Heide, K., Wiesener, F.: (2026): A multiscale simulation approach for grinding processes: grain engagement, heat generation, and coolant interaction, Production Engineering (2026), published online 08. January 2026, 19 Seiten.
DOI: https://doi.org/10.1007/s11740-025-01389-0

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Wege, C.: (2026): Function-oriented machining of turbulence-generating surface structures on cooling channel surfaces of injection moulds, 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Procedia CIRP, Vol. 138 (2026), S. 456–461.
DOI: 10.1016/j.procir.2026.01.079

Konferenz (reviewed)

Denkena, B., Zender, F., Heide, K., Bergmann, B.: (2026): Selbstregelndes Fertigungssystem zur gezielten Einstellung des Martensitgehalts in der Randzone, ZWF Jahrg. 121 (2026) 1–2, S. 54-60.
DOI: DOI:10.1515/zwf-2026-1005
ISSN: ISSN: 0947-0085

Zeitschriften/Aufsätze (reviewed)

Heide, K., Denkena, B., Winkler, M.: (2026): Digitales Zwillingssystem für adaptive Fertigung, ZWF 121 (2026) 1–2; S. 99 – 103.
DOI: DOI:10.1515/zwf-2026-1015

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Zenger, M., Prasanthan, V.: (2026): Dry grinding - Effects of process parameters and atmosphere on surface and subsurface properties, 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Procedia CIRP, Vol. 138 (2026), S. 540–545.
DOI: 10.1016/j.procir.2026.01.093

Konferenz (reviewed)

Denkena, B., Buhl, H., Berlin, J.: (2026): Geregelt zu optimalen Druckeigenspannungen, WB Werkstatt + Betrieb 1 (2026), 1 Seite.

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Zender, F.: (2026): Influence of the cooling strategy on wear behavior and chip formation during external turning, 25th Machining Innovations Conference for Aerospace Industry 2026 (MIC 2026), 4th and 5th February 2026, Hannover, Germany, MIC Procedia (2026), S. 044–048.
DOI: https://www.ssrn.com/link/MIC-2026.html

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Zenger, M.: (2026): Influence of Oxygen-Free Atmosphere on Surface Grinding: Process Forces, Residual Stresses, and Surface Quality, Engineering Reports, 2026, 10 Seiten.
DOI: https://doi.org/10.1002/eng2.70613

Zeitschriften/Aufsätze (reviewed)

Denkena, B.: (2026): Shape error prediction in 5-axis machining using graph neural networks, Procedia CIRP 138 (2026), 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 10.-12. July 2024, Ischia/Neapel, Italien, S. 474–479.

Konferenz (reviewed)

Denkena, B., Schlenker, F.: (2026): Design guidelines for additively manufactured stiffening structures to reduce vibrations in milling, Procedia CIRP 138 (2026), 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 10.-12. July 2024, Ischia/Neapel, Italien, S. 674–679.
DOI: 10.1016/j.procir.2026.01.116

Konferenz (reviewed)

Denkena, B., Schlenker, F.: (2026): Analysis ofShape Deviationin Milling Processes for Non-rigid 316L Aircraft Brackets, Procedia CIRP 138 (2026), 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 10.-12. July 2024, Ischia/Neapel, Italien, S. 486–491.
DOI: 10.1016/j.procir.2026.01.084

Konferenz (reviewed)

Denkena, B., Bergmann, B., Zenger, M.: (2026): Influence of an Oxygen-Free Atmosphere on Diamond-Single-Grain Scratching of Ti–6Al–4V, Advanced Engineering Materials, 2026, 9 Seiten.
DOI: https://doi.org/10.1002/adem.202502796

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Kowalke, D.: (2026): Qualitätsregelung bei der Zerspanung hybrider Bauteile, 25. Umformtechnisches Kolloquium Hannover 18. und 19. März 2026, Garbsen, 2 Seiten.

Konferenz

Denkena, B., Buhl, H., Kowalke, D.: (2026): Automated surface finishing of steel surfaces for thin-film sensors, Procedia Computer Science 276 (2026), 7th International Conference on System-Integrated Intelligence (SysInt 2025) 04 - 06 June 2025, Bremen, Germany, S. 191-198.
DOI: 1877-0509 © 2025 The Authors. Published by Elsevier B.V

Konferenz (reviewed)

Heide, K., Voelker, H.: (2026): AI-driven collaborative assistance system in production planning, CIRP Journal of Manufacturing Science and Technology, Volume 67 (2026), S. 48-59.
DOI: https://doi.org/10.1016/j.cirpj.2026.02.010

Zeitschriften/Aufsätze (reviewed)

Vortrag

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 …

Anzahl der gefundenen Publikationen: 713

Ducke, F.: (2026): Einfluss der Ritzgeometrie auf das Ritzverhalten, Schleiftagung, 04.-05.02.2026, Fellbach, 13 Seiten.

Vortrag

Denkena, B., Heide, K., Böttcher, A.: (2026): Human-Centred Energy Optimisation for Sustainable Production Supported by an Asset Administration Shell, CIRP Winter Meeting, STC-O, 19.02.2026, Paris, Frankreich, 13 Seiten.

Vortrag

Denkena, B., Buhl, H., Ding, C.: (2026): Media-Free and Contactless Mirco-Positioning System using Ultrasonic Levitation and Magnetic Actuators, 22nd International Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA) 01.07.-03.07.2025 Vilnius, Litauen, 18 Seiten.

Vortrag

Junge, N.: (2025): Framework for the time-dependent wear prediction using a greybox approach, 51st International Conference on Metallurgical Coatings & Thin Films, 11.-16.05.2025, San Diego/USA, 21 Seiten.

Vortrag

Denkena, B., Buhl, H., Araoud, M.T.: (2025): Pose-dependent dynamic behaviour of a machining robot: Modal analysis, 2025 34th IEEE International Conference on Robot and Human Interactive Communication (RO-MAN) August 25-29, 2025 Eindhoven, The Netherlands, 13 Seiten.

Vortrag

Kraeft, M.: (2025): Einfluss der Schichteigenschaften auf das Verschleißverhalten von PVD beschichteten Wendeschneidplatten, Konferenz SPP2402, 30.09.-01.10.2025 im PZH, Garbsen, 13 Seiten.

Vortrag

Bergmann, B., Lang, R., Schulze, A.: (2025): Schleifwerkzeugherstellung: Vom Einzelkorn zur vollständigen Schleifscheibe, Schleiftagung, 29.-30.01.25, Stuttgart-Fellbach, 33 Seiten.

Vortrag

Bergmann, B., Schenzel, J.: (2025): Influence of different Cooling Lubricants and Supply Strategy on the Mechanical Load, CIRP Meeting, Paris, 19.-21.02.2025, 7 Seiten

Vortrag

Bergmann, B., Petersen, H., Gerdes, L., Weßel, P., Nordmeyer, H.: (2025): Einfluss der Zwillingsbildung auf die Eigenspannungsbestimmung beim Festwalzen von austenitischem Stahl, Frühjahrssitzung FA Eigenspannungen (2025) 14. Oktober 2025, Garbsen, Deutschland, 20 Seiten.

Vortrag

Bergmann, B., Junge, N.: (2025): Vorhersage des Verschleißes mittels maschinellen Lernens, SPP 2402-Konferenz, 30.02.2025, Aachen, 23 Seiten.

Vortrag

Bergmann, B., Denkena, B., Lang, R.: (2024): Schleifwerkzeugherstellung: Vom Einzelkorn zur vollständigen Schleifscheibe, Schweizer Schleif-Symposium 2024, 10. -11. September 2024, Zürich, 33 Seiten.

Vortrag

Bergmann, B., Luthe, L., Schaper, F.: (2024): On the art of sustainable cutting metals, CIRP JAPAN Online Seminar 2024 am 11.07.2024, 66 Seiten.

Vortrag

Denkena, B., Bergmann, B., Lang, R.: (2024): Potential of grinding under oxygen-free atmosphere. Collaborative Research Center 1368: Oxygen-free production, Vortrag CIRP Winter Meeting, STC-G, 23.02.2024, Paris, 13 Seiten.

Vortrag

Bergmann, B., Schaper, F.: (2024): Study of the effect of oxygen level on tool wear in machining Ti-6Al-4V, 73rd CIRP General Assembly, Thessaloniki, Greece , Aug. 18-24, 25 Seiten.

Vortrag

Denkena, B., Buhl, H., Wnendt, E., Meier, M.: (2024): Chuck with integrated clamping force measurement for thin-walled workpieces, 20th International Conference on Precision Engineering" (ICPE 2024) in Sendai, Japan, 23.-26. Oktober 2024, 9 Seiten.

Vortrag

Denkena, B., Bergmann, B., Schenzel, J., Kraeft, M.: (2024): Chip formation of AISI1045 at vc = 500 m/min, Videobeitrag/Stummfilm, veröffentlicht unter: https://av.tib.eu/media/68162 im TIB-Portal.
DOI: https://doi.org/10.5446/68162

Vortrag

Heikebrügge, S.: (2024): Festwalzen als innovatives mechanisches Bearbeitungsverfahren zur Steigerung der Ermüdungsfestigkeit von Schweißverbindungen in der Windenergie, DVS-Innovationstag, 11.04.2024, 26 Seiten.

Vortrag

Stoppel., D.: (2024): Einsatzmöglichkeiten Künstlicher Intelligenz in der Produktion, Zukunftsfabrik - Revolution oder Risiko für die Produktion, 21.08.2024, Bassum, 25 Seiten.

Vortrag

Denkena, B., Schmidt, C., Bogenschütz, M.: (2024): Multi-Orbital Placement of Towpregs in Continuous CFRP Rod Production, ACM6 - 6th International Symposium on Automated Composites Manufacturing (2024), 4. - 8. March 2024, 11 Seiten.

Vortrag

Stoppel, D.: (2024): ProKI: Al in Production Engineering. Tackling the Challenge of Generalizability, Tag der Künstlichen Intelligenz, 31.07.2024, Leibniz Universität Hannover, 1 Seite.

Vortrag

Publikationen des Instituts für Fertigungstechnik und Werkzeugmaschinen

Vortrag