Dr.-Ing. Carsten Schmidt
Dr.-Ing. Carsten Schmidt
Leitung
Telefon
E-Mail
Adresse
Ottenbecker Damm 12
21684 Stade
21684 Stade
Dr.-Ing. Carsten Schmidt
Leitung
Adresse
Ottenbecker Damm 12
21684 Stade
21684 Stade
Veröffentlichungen
Zeitschriften/Aufsätze (reviewed)
-
(2024): Multi-orbital placement of towpregs on cylindrical foam cores in continuous CFRP rod production, Manufacturing Letters, 40 (2024), S. 118-120.
DOI: https://doi.org/10.1016/j.mfglet.2024.03.018 -
(2023): Influence of Epoxy Spray Binder on Infusion and Cure in Liquid Composite Molding Processes, Applied Composite Materials, published online 22 December 2023, 18 Seiten.
DOI: https://doi.org/10.1007/s10443-023-10189-7 -
(2023): Adhesion-cohesion balance of prepreg tack in thermoset automated fiber placement. Part 2: Ply-ply cohesion through contact formation and autohesion, Composites Part C, 12 (2023), 15 Seiten.
DOI: https://doi.org/10.1016/j.jcomc.2023.100396 -
(2023): Representative structural element approach for assessing the mechanical properties of automated fibre placement-induced defects, Composites Part C, 10 (2023), 12 Seiten.
-
(2022): Experimental Investigation on the Use of a PEI Foam as Core Material for the In-Situ Production of Thermoplastic Sandwich Structures Using Laser-Based Thermoplastic Automated Fiber Placement, Materials, Vol 15 (2022), Nr. 7141, 15 Seiten.
DOI: https://doi.org/10.3390/ma15207141 -
(2022): Spray binder for automated preforming: Spray process and preform properties, Polymer Composites, Vol. 1 (2022) Nr. 12, published online 02. October 2022, 12 Seiten.
DOI: 10.1002/bit.27107 -
(2022): Tack of epoxy resin films for aerospace-grade prepregs: Influence of resin formulation, B-staging and toughening, Polymer Testing, Vol. 114 (2022), Nr. 107709, 10 Seiten.
DOI: https://doi.org/10.1016/j.polymertesting.2022.107709 -
(2022): Effects of fibre misalignment on the stability of double-curved composites, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (2022), CIRP ICME ‘22, 12.-14. July 2022, Naples, Italy
-
(2021): Influence of a Dynamic Consolidation Force on In Situ Consolidation Quality of Thermoplastic Composite Laminate, Journal of Composites Science, Vol. 5 (2021) 3, 12 Seiten.
DOI: 10.3390/jcs5030088 -
(2021): Adhesion-cohesion balance of prepreg tack in thermoset automated fiber placement. Part 1: Adhesion and surface wetting, Composites Part C, Open Access 6 (2021) 100204, S. 1-12.
DOI: https://doi.org/10.1016/j.jcomc.2021.100204 -
(2021): An optical‑fow‑based monitoring method for measuring translational motion in infrared‑thermographic images of AFP processes, Production Engineering (2021, punlished online, 19. October 2021), 10 Seiten.
DOI: https://doi.org/10.1007/s11740-021-01084-w -
(2021): Numerical Investigation of Residual Stresses in Welded Thermoplastic CFRP Structures, Journal of Composites Science, 5 (2021) 45, 10 Seiten.
DOI: https://doi.org/10.3390/jcs5020045 -
(2020): Prepreg tack: A review of mechanisms, measurement and manufacturing implication, Polymer Composites (Online Library), 41 (2020), S. 3440-3458.
DOI: 10.1002/pc.25642
ISSN: 1548-0569 -
(2019): Deep learning-based classification of production defects in automated-fiber-placement processes, Production Engineering Research and Development (WGP), published online: 21 March 2019, 9 Seiten.
DOI: 10.1007/s11740-019-00893-4 -
(2019): Interaction of process parameters and material properties with regard to prepreg tack in automated lay-up and draping processes, Composites Part A, Vol. 117 (2019), S. 308-316.
-
(2019): Artificial intelligence for non‑destructive testing of CFRP prepreg materials, Production Engineering Research and Development, published online: 06 July 2019, 10 Seiten.
-
(2018): Design and mechanical characterisation of a layer wise build AFP insert in comparison to a conventional solution, Production Engineering Research and Development (WGP), Volume 12 (2018) Number 2, April 2018, S. 121-130.
DOI: 10.1007/s11740-018-0815-2 -
(2018): Production-based design of a hybrid load introduction element for thin-walled CFRP Structures, Production Engineering Research and Development (WGP), Volume 12 (2018) Number 2, April 2018, S. 113-120.
DOI: 10.1007/s11740-018-0821-4 -
(2016): Systematic Process Chain Creation for CFRP Structures in Early Product Development Stages, Advanced Materials Research, Vol. 1140 (2016), S. 328 - 334.
DOI: 10.4028/www.scientific.net/AMR.1140.328 -
(2016): Thermographic online monitoring system for Automated Fiber Placement processes, Composites Part B, Vol. 97 (2016), S. 239 - 243.
DOI: 10.1016/j.compositesb.2016.04.076 -
(2013): Efficient Production of CFRP Lightweight Structures on the Basis of Manufacturing Considerations at an Early Design Stage, New Production Technologies in Aerospace Industry, Lecture Notes in Production Engineering, S. 131-136.
DOI: 10.1007/978-3-319-01964-2_18 -
(2013): Evaluation of eddy current testing for quality assurance and process monitoring of automated fiber placement, Composites: Part B 56 (2014), S. 109–116.
-
(2010): Experimental investigation and modeling of thermal and mechanical influences on shape deviations in machining structural parts., International Journal of Machine Tools & Manufacture, Vol. 50 (2010) Issue 11, S. 1015-1021.
-
(2008): Virtuelle Nullserienfertigung in der Planung. Ein neuartiger Ansatz zur simulationsgestützten Planung und Überwachung spanender Fertigungsprozesse., wt Werkstattstechnik online, 98 (2008) H. 3, S. 149-155.
-
(2007): Experimental investigation and simulation of machining thin-walled workpieces. , Production Engineering, Research and Development, Vol. 1 (2007) Nr. 4, SpringerLink online, S. 343-350, 2007.
-
(2006): A flexible force model for predicting cutting forces in end milling., Annals of the German Academic Society for Production Engineering (WGP), Production Engineering, Vol. XIII (2006) 2, S. 15-20.
Beiträge in Büchern
-
(2021): Schalenförmige Hybridverbunde und Inserts, Intrinsische Hybridverbunde für Leichtbautragstrukturen (2021), Grundlagen der Fertigung, Charakterisierung und Auslegung, Springer Vieweg, Berlin, Heidelberg, S. 11–120.
DOI: https://doi.org/10.1007/978-3-662-62833-1_2
ISBN: 978-3-662-62832-4 -
(2021): Produktionstechnologien und Anwendungsbeispiele, Intrinsische Hybridverbunde für Leichtbautragstrukturen (2021), Grundlagen der Fertigung, Charakterisierung und Auslegung, Springer Vieweg, Berlin, Heidelberg, S. 287–317.
DOI: https://doi.org/10.1007/978-3-662-62833-1_6
ISBN: 978-3-662-62832-4
Vortrag
-
(2024): Multi-Orbital Placement of Towpregs in Continuous CFRP Rod Production, ACM6 - 6th International Symposium on Automated Composites Manufacturing (2024), 4. - 8. March 2024, 11 Seiten.
-
(2023): Adapting concrete experimental measurements in a FEM simulation for the development of a novel orthopaedic shoe, Composites 2023 - 9th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Trapani, Sicily, Italy, September 12-14, 2023, 24 Seiten.
-
(2023): Stability of double-curved composite structures comprising misaligned fibres, 26th International Conference on Composite Structures & 8th International Conference on Mechanics of Composites, Porto, Portugal, 27-30 June 2023, 17 Seiten.
-
(2020): Investigation of Asymmetrical Fiber Metal Hybrids Used as Load Introduction Element for Thin-Walled CFRP Structures, 14th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (ICME),15-17 July 2020, Virtual Conference, 16 Seiten.
-
(2020): A Methodology for Strategic Individualization of Stiffened CFRP Structures, 14th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (ICME), Virtual Conference, 15-17 July 2020, 12 Seiten.
-
(2020): Local Fiber Metal Laminate used as Load Introduction Element for Thin Walled CFRP Structures, Hybrid 2020 (online), 29.04.2020, Karlsruhe, 23 Seiten.
-
(2018): Multilayer-Inserts – MLI. Krafteinleitung in dünnwandige CFK-Strukturen durch lokale Hybridisierung, 5. Technologietag Hybrider Leichtbau, 25. Juni 2018, Stuttgart, 41 Seiten.
-
(2018): NUMERICAL INVESTIGATION OF A LAYERED HYBRID LOAD INTRODUCTION ELEMENT FOR THIN-WALLED CFRP STRUCTURES, ECCM 18, 23. Juni 2018, Athen, 18 Seiten.
-
(2017): Thermal imaging as a solution for reliable monitoring of AFP processes , 3rd ACM Montreal, 20th April 2017, 12 Seiten.
-
(2017): Influence of Prepreg Material Quality on Carbon Fiber Reinforced Plastic Laminates Processed by Automated Fiber Placement, CIRP ICME ' 17, 11th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 19 - 21 July 2017, Ischia, Naples, Italy, 15 Seiten.
-
(2017): Influence of Prepreg Material Quality on Carbon Fiber Reinforced Plastic Laminates Processed by Automated Fiber Placement, CIRP ICME'17, 11th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 19-21 July 2017, Ischia, Naples, Italy, 12 Seiten.
-
(2017): Influence of AFP process parameters on the temperature distribution used for thermal in-process monitoring, 1st CIRP Conference on Composite Materials Parts Manufacturing, 09.06.2017, Karlsruhe, 15 Seiten.
-
(2016): Automated Fiber Placement Head for Manufacturing of innovative Aerospace stiffening Structures, 16th Machining Innovations Conference for Aerospace Industry, 23. - 24.11.2016, Garbsen, 20 Seiten.
-
(2016): Systematische Erstellung von Prozessketten in frühen Phasen der Produktentwicklung von CFK-Strukturen , 6. WGP Jahrestagung, 05. - 06.09.2016, Hamburg, 13 Seiten.
-
(2016): Thermal Image-Based Monitoring for the Automated Fiber Placement Process, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 20. - 22.07.2016, Neapel, Italien, 17 Seiten.
-
(2016): POTENTIAL OF THERMAL INLINE MONITORING IN AUTOMATED FIBER PLACEMENT PROCESS FOR AEROSPACE APLICATIONS, 7th International Symposium on Composites Manufacturing for High Performance Applications - ISCM, 24. - 25.08.2016, Braunschweig, 16 Seiten.
-
(2016): Estimation of production cost in an early design stage of CFRP lightweight structures, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 20. - 22.07.2016, Neapel, Italien, 12 Seiten.
-
(2015): Self-Configurable Production of CFRP Aerospace Components Based on Multi-Criteria Structural Optimization , CFK-Valley Convention, 16.06.2015, Stade, 22 Seiten.
-
(2015): Production-based Multi-criteria Design Optimisation of an Unconventional Composite Fuselage Side Panel by Evolutionary Strategies and a Surrogate Model of Manufacturability Analysis, 11th World Congress on Structural and Multidisciplinary Optimisation, 7. - 12.06.2015, Sydney, Australien.
-
(2015): Simulative Bauteil- und Prozessoptimierung im Composite Bereich, 1. Niedersächsisches Symposium Materialtechnik, 12. - 13.02.2015, Clausthal-Zellerfeld.
-
(2015): Online Monitoring of Automated Fiber Placement Processes by Thermal Imaging , Automated Composites Manufacturing, 24.04.2015, Montreal, 15 Seiten.
-
(2014): CHARACTERIZATION OF FIBER-REINFORCED STIFFENER PROFILES FOR AIRCRAFT FUSELAGE PRELIMINARY STRUCTURAL DESIGN, ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22. - 26. Juni 2014, 11 Seiten.
-
(2014): EFFECT OF MANUFACTURING PROCESS INDUCED FIBER WAVINESS ON MECHANICAL PROPERTIES OF COMPOSITE STRUCTURES BY EXAMPLE OF A PREPREG FORMING PROCESS, ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22. - 26. Juni 2014.
-
(2008): Virtual pilot production in process planning., 4th I*PROMS Virtual International Conference "Innovative Production Machines and Systems", Cardiff, UK, July 1st-14th, 2008, 14 Seiten.
-
(2008): Genetik und Intelligenz. Bestehende Anwendungen im Praxiszusammenhang. , 2. Kolloquium des SFB 653, 24. April 2008, Hannover, 27 Seiten.
Konferenz (reviewed)
-
(2023): Automated fiber placement: Modeling the influence of compaction roller properties on manufacturable geometries, SAMPE Europe Conference 2023, 3-5 October 2023, Madrid, Spain, 14 Seiten.
-
(2023): Measuring techniquues for prepreg tackiness: a comparative study, SAMPE Europe Conference 2023, 3-5 October 2023, Madrid, Spain, 13 Seiten.
-
(2022): Automated fiber placement: The impact of manufacturing constraints on achieving structural property targets for CFRP-stiffeners, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘22, (2022), 13.-15. July 2022, Virtual Conference, 6 Seiten.
-
(2022): Investigation of the Strainfield surrounding complex-shaped local fiber metal hybrids, Composites Meet Sustainability – Proceedings of the 20th European Conference on Composite Materials, ECCM20. 26.-30. June 2022, Lausanne, Switzerland, 8 Seiten.
DOI: https://doi.org/10.1016/j.procir.2021.03.063 -
(2021): A methodology for strategic individualization of stiffened CFRP structures, 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘20, Procedia CIRP 99 (2021), 15-17 July 2020, Virtual Conference, S. 426-431.
DOI: 10.1016/j.procir.2021.03.061 -
(2021): Investigation of asymmetrical fiber metal hybrids used as load introduction element for thin-walled CFRP structures, 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘20, Italy, Procedia CIRP 99 (2021), 15.-17.07.2020, Virtual Conference, S. 443-447.
DOI: 10.1016/j.procir.2021.03.063 -
(2020): Investigation of Asymmetrical Fiber Metal Hybrids Used as Load Introduction Element for Thin-Walled CFRP Structures, 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME '20, Italy, Procedia CIRP 99 (2021), 15-17 July 2020, Virtual Conference, S. 443-447.
-
(2020): A methodology for strategic individualization of stiffened CFRP structures, 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME '20, Procedia CIRP 99 (2021), S. 426-431.
-
(2018): Continuous Draping of Double Curved Geometries – A Geometrical Approach to Describe an Automated Layup Process of Fabrics on Complex Surface , SAMPE Europe Conference 2018 Southampton, 12.09.2018, Southampton, Vereinigtes Königreich, 8 Seiten.
-
(2018): Influence of prepreg material quality on carbon fiber reinforced plastic laminates processed by automated fiber placement, 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME '17, Procedia CIRP 67 (2018), S. 422–427.
-
(2017): Concept for automated production of CFRP-metal hybrid compounds integrated in an Automated Fiber Placement process, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME ' 16, Procedia CIRP, 6 Seiten.
-
(2017): Thermal image-based monitoring for the automated fiber placement process , 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME ' 16, Procedia CIRP 62 (2017), S. 27 - 32, 6 Seiten.
-
(2017): Estimation of production cost in an early design stage of CFRP lightweight structures , 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '16, Procedia CIRP 62 (2017), S. 45-50.
-
(2017): Influence of AFP process parameters on the temperature distribution used for thermal in-process monitoring, 1st CIRP Conference on Composite Materials Parts Manufacturing, Procedia CIRP 66 (2017), S. 68 - 73.
DOI: 10.1016/j.procir.2017.03.220 -
(2016): Automated Fiber Placement Head for Manufacturing of Innovative Aerospace Stiffening Structures, 16th Machining Innovations Conference for Aerospace Industry - MIC 2016, Procedia Manufacturing 6 (2016), S. 96 – 104.
DOI: 10.1016/j.promfg.2016.11.013 -
(2015): Production-based Multi-criteria Design Optimisation of an Unconventional Composite Fuselage Side Panel by Evolutionary Strategies and a Surrogate Model of Manufacturability Analysis, 11th World Congress on Structural and Multidisciplinary Optimisation, 7. - 12.06.2015, Sydney, Australien.
-
(2014): Design optimization of an unconventional CFRP aircraft Panel stiffener based on manufacturability criteria of integrated fiber Placement process Analysis., European Conference on Composite Materials, Seville, Spain, 22-26 June 2014, 8 Seiten.
-
(2014): CHARACTERIZATION OF FIBER-REINFORCED STIFFENER PROFILES FOR AIRCRAFT FUSELAGE PRELIMINARY STRUCTURAL DESIGN, ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22. - 26. Juni 2014, 8 S.
-
(2014): EFFECT OF MANUFACTURING PROCESS INDUCED FIBER WAVINESS ON MECHANICAL PROPERTIES OF COMPOSITE STRUCTURES BY EXAMPLE OF A PREPREG FORMING PROCESS, ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22. - 26. Juni 2014, 8 S.
-
(2014): Variable forming tool and process for thermoset prepregs with simulation verified part quality, ESAFORM 2014, Selected, peer reviewed papers from the 17th Conference of the European Scientific Association on Material Forming, May 7-9, Espoo, Finnland, S. 391-398.
-
(2013): SIMULATION BASED DESIGN OPTIMIZATION OF A CFRP FUSULAGE PANEL ACCORDING TO DRAPING PROCESS OF CARBON FIBER TEXTILES USING EVOLUTIONARY ALGORITHMS AND RESPONSE SURFACE METHODS , SAMPE 2013 Proceedings: Education & Green Sky - Materials Technology for a Better World, Long Beach, CA, May 6-9, 2013, S.1110-1124.
-
(2008): Virtual pilot production in process planning., 4th I*PROMS Virtual International Conference "Innovative Production Machines and Systems", Cardiff, UK, July 1st-14th, 2008, S. 492-497.
-
(2007): Simulation based Process Planning for Gentelligent Production., Proceedings of 40th CIRP International Seminar on Manufacturing Systems, 30 May - 1 June 2007, Liverpool, UK, 6 Seiten, 2007.
Konferenz
-
(2023): Einfluss von Sprühbinder auf die Permeabilität von Faserpreforms und deren Betrachtung in Infusionssimulationen, Tagungsband 5. Symposium Materialtechnik, 23. bis 24. Februar 2023, 15 Seiten.
-
(2022): Determination and impact of fibre angle deviations in automated processing of carbon fiber non-crimp fabrics, ACM5 - 5th International Symposium on Automated Composites Manufacturing (2022), 06.-07. April 2022, Bristol, United Kingdom, 2 Seiten.
-
(2022): Investigation of Novel Fe-Based Modeling Aproaches for Stifened CFRP Aircraft Structures, Composites Meet Sustainability – Proceedings of the 20th European Conference on Composite Materials (2022) ECCM20, 26.-30. June 2022, Lausanne, Switzerland, 8 Seiten.
-
(2022): In-situ Automated Fiber Placement System for Manufacturing of Aerospace-grade Thermoplastic Composites – Elastic Consolidation Roller, 6th International Conference & Exhibition on Thermoplastic Composites, ITHEC (2022), 12.–13. October 2022, Bremen, Germany, S. 205-208.
-
(2022): Effect of Tape Feed Parameters on Temperature in Prepreg Tape During Thermoplastic Automated Fiber Placement, 6th International Conference & Exhibition on Thermoplastic Composites (2022) ITHEC 2022, 12.-13. October 2022, Bremen, Germany, S. 177-180.
-
(2022): Impact Automated Fibre Placement Induced Defects on the Compression Behaviourof CFRP Structures, SAMPE Europe Conference (2022), 15.-17. November 2022, Hamburg, Germany, 9 Seiten.
-
(2018): SIMPLIFIED REPRESENTATION OF COMPLEX STRUCTURAL COMPONENTS FOR FINITE-ELEMENT-ANALYSIS, ECCM18 - 18th European Conference on Composite Materials, Athens, Greece, 24-28th June 2018, 8 Seiten.
-
(2018): NUMERICAL INVESTIGATION OF A LAYERED HYBRID LOAD INTRODUCTION ELEMENT FOR THIN-WALLED CFRP STRUCTURES, ECCM18 - 18th European Conference on Composite Materials, Athens, Greece, 24-28th June 2018, 8 Seiten.
-
(2017): Thermal imaging as a solution for reliable monitoring of AFP processes, 3rd International Symposium on Automated Composites Manufacturing (ACM), 20.04.2017, Montreal, Kanada, 9 S.
-
(2015): Simulative Bauteil- und Prozessoptimierung im Composite Bereich, 1. Niedersächsisches Symposium Materialtechnik, 12. - 13.02.2015, Clausthal-Zellerfeld.
-
(2007): Planung und Überwachung spanender Fertigungsprozesse auf Basis werkstückeigener Informationen. Simulationsgestützte Arbeitsplanung innerhalb der gentelligenten Produktion., 1. Kolloquium "Genetik und Intelligenz - Neue Wege in der Produktionstechnik", 19. April 2007, Hannover Messe, CC-Convention Center, SFB 653: Gentelligente Bauteile im Lebenszyklus, "Nutzung vererbbarer, bauteilinhärenter Informationen in der Produktionstechnik", Leibniz Universität Hannover, S. 45-50, 2007.
-
(2006): Level Curve Based Geometry Representation for Cutting Force Predicition., Annals of DAAAM for 2006 & Proceedings of the 17th International DAAAM Symposium, 8-11th November 2006, Vienna, Austria, S. 367-368.
Berichte
-
(2013): Neue Möglichkeiten der Materialanalyse – die Niedersächsische Technische Hochschule erweitert ihre Laborkapazitäten im CFK Nord, Innovation Report, Ausgabe 1-2013, S. 27-29.
-
(2008): Auf dem Weg zur virtuellen Nullserienfertigung - ein zentraler Funktionsbereich zukunftsweisender Produktentstehungsprozesse., Jahresbericht 2007, Berichte aus dem PZH, ISBN: 978-3-939026-84-6, S. 37.
Zeitschriften/Aufsätze
-
(2024): Leichtbau in der Landmaschinentechnik-CFK-Chassis für Feldhäcksler, ATZ, 17. Jahrgang (2024), 01/2024, S. 32-36.
ISSN: 2524-8782 (Print) - 2524-8790 (Online) -
(2023): Automatisierte Preform-Fertigung, VDI-Z. Bd. 165 (2023) Nr. 5, S. 51-53.
-
(2021): Schneidmodul für die adaptive Schnittwinkeleinstellung - Automatisierte Integration von Metalleinsätzen in Faserverbundstrukturen, VDI-Z, 163 (2021) Nr. 4, S. 52-55.
-
(2021): Herstellung von thermoplastischen Leichtbaustrukturen, VDI-Z BD. 163 (2021), NR. 11-12, S. 83-85.
-
(2019): Flexible Produktion individualisierter CFK-Strukturen, lightweight.design, 12 (2019) 6, S. 58-63.
-
(2019): Design und Herstellung unkonventionell versteifter Flugzeugstrukturen, ATZ extra, Sonderheft für die VDI-FVT 2019/2020, Ausgabe Dezember 2019, S. 46-48.
-
(2018): Dreidimensionale Faserverstärkung in additiv gefertigten Kunststoffbauteilen, VDI-Z, 160 (2018), Nr. 6, S. 67-70.
-
(2017): Erhöhung der Prozesssicherheit von Automated-Fiber-Placement-Prozessen, Ingenieurspiegel 1/2017, 29-31 Seiten.
-
(2016): Bahnplanung für Automated-Fiber-Placement-Prozesse , Lightweight Design, Ausgabe 4 (2016), S. 26 - 30.
-
(2016): Automated path planning and thermographic monitoring for automated fibre placement , JEC Composites Magazine, No. 104 (April - Mai 2016), S. 44 - 46.
-
(2016): Entwicklung eines mehrlagigen Inserts für dünnwandige Hochleistungs-CFK-Strukturen, Lightweight Design, Ausgabe 1 (2016), S. 22 - 27.
-
(2014): Klebrigkeit optimieren und Prozesssicherheit erhöhen - Neue Methode misst Anhaftungsverhalten von CFK-Materialien, TI-Magazin, Ausgabe 2/2014, S. 9.
-
(2013): Bewertung mehrstufiger CFK-Fertigungsprozesse - Analyse der Zusammenhänge zwischen Formwerkzeugkosten und Bauteilqualität bei der Herstellung von CFK-Bauteilen, ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, Jahrg. 108 (2013) 11, S. 855-859.
-
(2011): Weiterer CFK-Forschung-Baustein für Europas Leichtbaustandort Nr. 1. , phi - Produktionstechik Hannover informiert, 12 (2011) 2, S. 4-5.
-
(2007): Die gentelligente Produktion - Zukunftsweisend Fertigen. Simulationsunterstützte Planung und Überwachung spanender Fertigungsprozesse., ZWF-Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (2007) 10, S. 626-629, 2007.
Patentschriften
-
(2019): Krafteinleitungselement, Offenlegungsschrift, Deutsches Patent- und Markenamt, DE 10 2017 119 940 A1, Offenlegungstag: 28.02.2019.
Doktorarbeiten
-
(2011): Einflussgrößensensitive Simulation und Überwachung von Fräsprozessen. , Berichte aus dem IFW, Band 03/2011, 220 S., ISBN 978-3-941416-90-1, PZH Produktionstechnisches Zentrum GmbH.