M. Sc. Marcel Wichmann

Dr.-Ing. Marcel Wichmann
Management
Address
An der Universität 2
30823 Garbsen
Building
Room
210
Dr.-Ing. Marcel Wichmann
Management
Address
An der Universität 2
30823 Garbsen
Building
Room
210

Short bio

Marcel Wichmann is a research assistant and group leader with six years of experience working at the Institute of Production Engineering and Machine Tools of the Leibniz University Hannover. Marcel is specialized on planning of manufacturing processes in production systems. His team investigates planning systems that enable an autonomous and resource efficient manufacturing by using digitalization approaches and process simulations.

 

Publications

Journals (reviewed)

  • Denkena, B., Wichmann, M., Eggers, M.: (2024): Radiopacity Enhancements in Polymeric Implant Biomaterials: A Comprehensive Literature ReviewACS Biomaterials Sci. Eng., 10 (2024) 3, S.1323 - 1334.
    DOI: https://doi.org/10.1021/acsbiomaterials.3c01667
  • Denkena, B., Wichmann, M., Heide, K. M., Wiesener, F., Nguyen, H. N.: (2023): Automated process planning in milling of hybrid componentsProduction Engineering (2023), published online 10. January 2023, 10 Seiten.
    DOI: https://doi.org/10.1007/s11740-022-01180-5
  • Denkena, B., Wichmann, M., Settnik, S. J., Surmann, J.: (2023): Automatisierte AngebotskalkulationZWF (2023), Band 118, Nr. 1-2, S. 79-83.
    DOI: 10.1515/zwf-2023-1002
    ISSN: 0947-0085
  • Denkena, B., Wichmann, M., Kettelmann, S.: (2023): Prozesskettenplanung unter UnsicherheitWT Werkstattstechnik Vol. 113 (2023) Nr. 4, S. 146-152.
    DOI: doi.org/10.37544/1436–4980–2023–04–46
  • Denkena, B., Heide, K.M., Malek, T., Wichmann, M., Brouwer, D.: (2023): Wirtschaftliche Regeneration defekter FormwerkzeugeVDI-Z, 165 (11-12), 2023, S. 30-33.
    DOI: http://dx.doi.org/10.37544/0042-1766-2023-11-12-30
  • Denkena, B., Breidenstein, B., Maier, H.J., Prasanthan, V., Fricke, L.V., Zender, F., Nguyen, H.N., Zwoch, S., Wichmann, M., Barton, S.: (2023): A process‑reliable tailoring of subsurface properties during cryogenic turning using dynamic process controlProduction Engineering, Published Online: 20 December, 19 Seiten.
    DOI: https://doi.org/10.1007/s11740-023-01244-0
  • Wichmann, M., Eden, M., Zvegincev, D., Wiesener, F., Bergmann, B., Schmidt, A.: (2023): Modeling the wetting behavior of grinding wheelsThe International Journal of Advanced Manufacturing Technology, Published Online 28. July 2023, 7 Seiten.
    DOI: https://doi.org/10.1007/s00170-023-12002-y
  • Denkena, B., Wichmann, M., Heide, K. M., Räker, R.: (2022): Laser Scanning Based Object Detection to Realize Digital Blank Shadows for Autonomous Process Planning in MachiningJournal of Manufacturing and Materials Processing (2022), 6, 1, 16 Seiten.
    DOI: https://doi.org/10.3390/jmmp6010001
  • Denkena, B., Wichmann, M., Kettelmann, S., Matthies, J., Reuter, L.: (2022): Ecological Planning of Manufacturing Process Chainssustainability (2022), Vol. 14, Nr. 5, 17 Seiten.
    DOI: https://doi.org/10.3390/su14052681
  • Denkena, B., Wichmann, M., Reuter, L.: (2022): Kostenvorteile durch adaptive PrüfplanungZWF (2022), Band 117, Nr. 4, S. 178-181.
  • Denkena, B., Breidenstein, B., Wichmann, M., Nguyen, H. N., Fricke, L. V., Barton, S., Maier, H. J.: (2022): Funktionsorientierte Stellgrößenauslegung beim DrehenWT Werkstattstechnik Bd. 112 (2022), Nr. 11-12, S. 767-772.
    DOI: doi.org/10.37544/1436-4980-2022-11-12-41
  • Denkena, B., Wichmann, M., Arnold, D.: (2022): Erfasste Betriebsdaten und ihre QualitätZWF, Vol. 117 (2022), Nr. 12, S. 847-850.
    DOI: 10.1515/zwf-2022-1161
    ISSN: 0947-0085
  • Denkena, B., Wichmann, M., Huuk, J.: (2022): Digitale Werkstückmodelle in der ProzessplanungWT WerkstattsTechnik, Bd. 112 (2022), Nr. 11-12, S. 762-766.
    DOI: doi.org/10.37644/1436-4980-2022-11-12-36
  • Denkena, B., Dittrich, M.-A., Stamm, S., Wichmann, M., Wilmsmeier, S.: (2021): Gentelligent processes in biologically inspired manufacturingCIRP Journal of Manufacturing Science and Technology, Vol. 32 (2021), S. 1-15.
    DOI: 10.1016/j.cirpj.2020.09.015
  • Denkena, B., Dittrich, M.-A., Wichmann, M., Friebe, S.: (2021): Ressourceneffizientes Umschleifen verschlissener VHM-WerkzeugeWT WerkstattsTechnik Bd. 111 (2021) Nr. 6, S.430-434.
    DOI: 10.37544/1436-4980-2021-06-74
  • D’Agostino, N., Billmeyer, J., Denkena, B., Glockner, P., Lindecke, P. N. J., Michael, J., Riedel, T. A., Sittig, D., Waldschmidt, J., Wichmann, M.: (2021): Integration additiver Herstellverfahren in die industrielle Prozess-, Fertigungs- und IT-KetteFrauenhofer IAPT (2021), 144 Seiten.
    DOI: 10.24406/IAPT-N-637938
  • Denkena, B., Dittrich, M.-A., Böß, V., Wichmann, M., Friebe, S.: (2019): Self‑optimizing process planning for helical flute grindingProduction Engineering Research and Development (WGP), published online: 7 June 2019, 8 Seiten.
    DOI: 10.1007/s11740-019-00908-0
  • Dittrich, M.-A., Böß, V., Wichmann, M., Denkena, B.: (2019): Simulation-based compensation of deflection errors in helical flute grindingCIRP Journal of Manufacturing Science and Technology, published online: 27 November 2019, 7 Seiten.
    DOI: 10.1016/j.cirpj.2019.11.002
  • Denkena, B., Dittrich, M.-A., Uhlich, F., Wichmann, M., Mücke, M.: (2018): Process parallel simulation of workpiece temperatures using sensory workpiecesCIRP Journal of Manufacturing Science and Technology, Vol. 21 (2018), S. 140-149.
    DOI: 10.1016/j.cirpj.2018.01.004

Conferences (reviewed)

  • Reuter, L., Denkena, B., Wichmann, M.: (2024): Adaptive inspection planning using a digital twin for quality assuranceProcedia CIRP 120 (2023) 3-8, 56th CIRP Conference on Manufacturing Systems, S. 3-8.
    DOI: 10.1016/j.procir.2023.08.002
  • Denkena, B., Wichmann, M., Eggers, M., Hurschler, C., Ettinger, M., Emonde, C: (2024): Manufacturing of microcavities by milling for X-ray identification of orthopedic implantsIntegrated Systems in Medical Technologies (ISMT), Conference Proceedings, 2023, 14.-15. September 2023, Erlangen, Germany, 6 Seiten.
  • Denkena, B., Bergmann, B., Wichmann, M., Handrup, M., Katzsch, D., Pillkahn, P., Reuter, L., Schmidt, C., Stelljes, F.: (2023): Resource-efficient process chains for the production of high-performance powertrain components in the automotive industryManufacturing Driving Circular Economy, Proceedings of the 18th Global conference on Sustainable Manufacturing (2023), 05.-07. October 2022, Berlin, Germany, 8 Seiten.
    DOI: https://doi.org/10.1007/978-3-031-28839-5
  • Wiesener, F., Bergmann, B., Wichmann, M., Eden, M., Freudenberg, T., Schmidt, A.: (2023): Modeling of heat transfer in tool grinding for multiscale simulations19th CIRP Conference on Modeling of Machining Operations, Procedia CIRP 117 (2023), 31. May - 02. June 2023, Karlsruhe, Germany, S. 269–274.
    DOI: 10.1016/j.procir.2023.03.046
  • Denkena, B., Wichmann, M., Noske, H., Stoppel, D.: (2023): Boundary conditions for the application of machine learning based monitoring systems for supervised anomaly detection in machining16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘22, Italy, Procedia CIRP 118 (2023), S. 519–524.
  • Breidenstein, B., Wichmann, M., Voelker, H.: (2023): Marker-free identification of turned, ground and deep rolled workpieces using wavelet transformation16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘22, Italy, Procedia CIRP 118 (2023), S. 1120–1125.
  • Denkena, B., Wichmann, M., Wulf, M.: (2023): Clustering of Learning Sub-models for Quality Prediction in a Resource-Efficient Tool Grinding ProcessProceedings of the 13th Congress of the German Academic Association for Production Technology (WGP), Freudenstadt, November 2023, Production at the Leading Edge of Technology, S. 94-103.
    DOI: https://doi.org/10.1007/978-3-031-47394-4_10
  • Friebe, S., Denkena, B., Wichmann, M.: (2023): Fully automated tool path planning for turbine blade repair56th CIRP Conference on Manufacturing Systems, CIRP CMS ‘23, South Africa, Procedia CIRP 120 (2023), S. 9–14.
    DOI: 10.1016/j.procir.2023.08.003
  • Denkena, B., Wichmann, M., Pillkahn, P.: (2022): Effect of mechanical finishing on residual stresses and application behavior of wire arc additive manufactured aluminum components6th CIRP Conference on Surface Integrity, Procedia CIRP 108 (2022), 08.-10. June 2022, Lyon, France, S. 135–140.
    DOI: 10.1016/j.procir.2022.03.026
  • Denkena, B., Breidenstein, B., Wichmann, M., Nordmeyer, H., Reuter, L., Voelker, H.: (2022): Marker-free identification of milled surfaces by analyzing stochastic and kinematic surface features by means of wavelet transformation6th CIRP Conference on Surface Integrity, Procedia CIRP 108 (2022), 8th and 10th of June 2022, Lyon, France, S. 264–269.
    DOI: 10.1016/j.procir.2022.03.046
  • Denkena, B., Breidenstein, B., Dittrich, M.-A., Wichmann, M., Nguyen, H. N., Fricke, L. V., Zaremba, D., Barton S.: (2022): Setting of deformation-induced martensite content in cryogenic external longitudinal turning6th CIRP Conference on Surface Integrity, Procedia CIRP 108 (2022), 08.-10. June 2022, Lyon, France, S.
    DOI: 10.1016/j.procir.2022.03.030
  • Denkena, B., Wichmann, M., Wulf, M.: (2022): Optimierte Prozessplanung durch digitale Zwillinge für das WerkzeugschleifenSchweizer Schleif-Symposium (2022), 06.-07. September 2022, Zürich, Schweiz, 10 Seiten.
  • Dittrich, M.-A., Denkena, B., Wichmann, M.: (2021): Parametric grinding wheel model for material removal simulation of tool grinding processes18th CIRP Conference on Modeling of Machining Operations, Procedia CIRP 102 (2021), June 15-17, 2021, Ljubljana, Slovenia, S. 381-386.
    DOI: 10.1016/j.procir.2021.09.065
  • Waldschmidt, J., Lindecke, P., Wichmann, M., Denkena, B., Emmelmann, C.: (2020): Improved Machining of Additive Manufactured Workpieces Using a Systematic Clamping Concept and Automated Process PlanningFraunhofer Direct Digital Manufacturing Conference (DDMC2020), March 2020, Berlin, 7 Seiten.
  • Denkena, B., Dittrich, M.-A., Uhlich, F., Wichmann, M.: (2019): Approaches for an energy and resource efficient manufacturing in the aircraft industry26th CIRP Life Cycle Engineering (LCE) Conference, Procedia CIRP 80 (2019), S. 180-185.

Conferences

  • Denkena, B., Wichmann, M., Reuter, L., Schlenker, F.: (2022): Realizing digital twins in the aircraft industry by using simulation-based soft sensors22nd Machining Innovations Conference for Aerospace Industry 2022 (MIC 2022), 30. November - 1. December 2022, Hannover, Germany, S. 72-79.

Journals

  • Denkena, B., Wichmann, M., Wulf, M.: (2023): Sensorfreie Kraftmessung beim WerkzeugschleifenVDI-Z, Bd. 165 (2023), Nr. 4, S. 56-58.
  • Breidenstein, B., Wichmann, M., Tack, E., Voelker, H.: (2023): Transparenz in der FertigungslinieQZ Qualität und Zuverlässigkeit, Vol. 68 (2023), Nr. 5, S. 74-77.
  • Denkena, B., Wichmann, M., Settnik, S., Surmann, J.: (2023): Arbeitsplanung automatisierenVDI-Z, 165 (2023) Nr. 9, S. 81-83.
  • Denkena, B., Wichmann, M., Voelker, H.: (2023): Multikriterielle Personaleinsatzplanung in der ProduktionZukunft. Digital Zeitschrift, Digitalisierung von der Idee zur Umsetzung, Ausgabe 1/2023, S. 34-37.
  • Denkena, B., Wichmann, M., Wulf, M.: (2023): Wie Maschinen von uns lernen könnenWGP Newsletter 2/2023, https://wgp.de/de, 6 Seiten.
  • Denkena, B., Wichmann, M., Pillkahn, P., Gläsner, T., Wenserski, J., Soffner, W.: (2022): Additive Prozesse in der automobilen SerieIndustrieanzeiger (2022), Nr. 4, S. 38-41.
  • Denkena, B., Wichmann, M., Kaiser, S., Winkler, M.: (2022): Mit teilautonomer Fertigungszelle MDR-Anforderungen erfüllenDeviceMed (2022), Jahrgang 2018, Nr. 1-2, S. 62-63.
    ISSN: 1860-9414
  • Malek, T., Winkler, M., Denkena, B., Wichmann, M.: (2022): Energieeffiziente ProzessplanungVDI-Z BD. 164 (2022), Nr. 4, S. 38-41.
  • Denkena, B., Wichmann, M., Wulf, M.: (2022): Revolutionäres Werkzeugschleifen, dank digitalem ZwillingDiamond Business, Vol. 82 (2022) Nr. 3, S. 26-29.
  • Wichmann, M., Breidenstein, B., Voelker, H.: (2022): Markierungsfreier Plagiatschutz für spanend gefertigt TeileMM Maschinenmarkt (2022), Nr. 8, S. 56-59.
  • Reuter, L., Denkena, B., Wichmann, M.: (2022): Ökologische FertigungsplanungVDI-Z, BD. 164 (2022), Nr. 10, S.26-28.
  • Denkena, B., Wichmann, M., Räker, R.: (2022): Adaptive Entgratung unter Einfluss von FormfehlernMittelstand-Digital Magazin (2022) Nr. 2, S. 42-45.
  • Denkena, B., Malek, T., Winkler, M., Wichmann M.: (2022): Controlling Coolant Pressure Brings Enormous Energy SavingsOpen Mind The Cam Force (2022), online erschienen am 24. Oktober 2022, 3 Seiten.
  • Denkena, B., Wichmann, M., Friebe, S., Heide, K., M.: (2022): Fräs- und Formwerkzeuge nachhaltig wiederaufbereitenMaschinenbau, Vol. 2 (2022), Nr. 6, S. 30-33.
  • Wichmann, M.: (2021): RESSOURCENEFFIZIENTE WIEDERVERWERTUNG VERSCHLISSENER FRÄSWERKZEUGEForum Schneidwerkzeug- und Schleiftechnik, 33 (2020) 4, S. 62-63.
  • Stürenburg, L., Denkena, B., Lindauer, M., Wichmann, M.: (2021): Maschinelles Lernen in der ProzessplanungVDI-Z 163 (2021) Nr. 11-12, S. 26-29.
  • Wichmann, M., Denkena, B., Dittrich, M.-A., Friebe, S.: (2020): Ressourceneffizientes Umschleifen von VHM-Fräsern - Neues Verfahren zur Regeneration verschlissener FräswerkzeugeVDI-Z BD., 162 (2020) Nr. 9, S. 45-47.
  • Denkena, B., Mainka, J., Dittrich, M.-A., Wichmann, M.: (2019): Automatische Vorschubanpassung unter Berücksichtigung des Werkzeugverschleißes - Simulationsunterstütztes Assistenzsystem für die ProzessplanungVDI-Z BD., 161 (2019) Nr. 12, S. 50-52.

Lectures

  • Wichemann, M., Bergmann, B., Wiesener, F.: (2023): Multiscale material removal simulation for tool grindingCIRP General Assembly, Winter Meetings (2023), 22.-24. February 2023, Paris, France, 10 Seiten.
  • Denkena, B. Wichmann, M., Pillkahn, P.: (2023): Einfluss des Festwalzens auf den Eigenspannungszustand und das Einsatzverhalten additiv gefertigter KomponentenFrühjahrssitzung FA Eigenspannungen (2023) 28. März 2023, Berlin, Deutschland, 24 Seiten.
  • Wiesener, F., Bergmann, B., Wichmann, M., Eden, M., Freundenberg, T., Schmidt, A.: (2023): Modeling of heat transfer in tool grinding for multiscale simulations19th CIRP Conference on Modeling of Machining Operations, Procedia CIRP 117 (2023), 31. May - 02. June 2023, Karlsruhe, Germany, 25 Seiten.
  • Denkena, B., Wichmann, M., Settnik, S.: (2023): AI-driven collaborative assistance systems in production planningCIRP General Assembly, Dublin, Ireland, Aug. 20-26, 2023, 8 Seiten.
  • Denkena, B., Wichmann, M., Noske, H., Stoppel, D.: (2022): Boundary conditions for the application of machine learning based monitoring systems for supervised anomaly detection in machiningCIRP ICM (2022), 16th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, 13.-15. July 2022, virtual conference, 9 Seiten.