Publikationen – Institut für Fertigungstechnik und Werkzeugmaschinen

Hier finden Sie die Dissertationen des IFW

Zu den Dissertationen

Hier finden Sie die Patente des IFW

Zu den Patenten

… 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 …

Anzahl der gefundenen Publikationen: 4782

Denkena, B., Bergmann, B., Buhl, H., Claßen, M., Teige, C., Klemme, H.: (2021): Virtuelle Spannplanung minimiert Ausschuss und Vorbereitungskosten, WB - Werkstatt und Betrieb, Onlineausgabe (Werkstatt-Betrieb.de), 28.05.2021, 10 Seiten (Verweis auf die dazugehörige Printausgabe, 154 (2021) 4, S. 53.) | Datei |

Zeitschriften/Aufsätze

Carlet, M., Hoffmann, D. C., Kruppe, N. C., Brögelmann, T., Bobzin, K., Beblein, S., Krödel, A., Breidenstein, B.: (2021): Qualification of PVD Coatings for Machining Using a Planing Test Setup, Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), September 2021, Dresden, S.301-309. | Datei |
DOI: https://doi.org/10.1007/978-3-030-78424-9_34

Konferenz (reviewed)

Denkena, B., Dittrich, M.-A., Huuk, J.: (2021): Simulation-based surface roughness modelling in end milling, 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘20, Procedia CIRP 99 (2021), 15-17 July 2020, Virtual Conference, S. 151-156. | Datei |
DOI: 10.1016/j.procir.2021.03.096

Konferenz (reviewed)

Breidenstein, B., Vogel, N., Behrens, H., Dietrich, M., Andersson, J. M.: (2021): Locally Resolved Residual Stress Measurements in (Al,Ti)N Coatings Using Raman Spectroscopy, Tribology in Industry (2021), 7 Seiten. | Datei |
DOI: 10.24874/ti.1144.06.21.08

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Bergmann, B., Klemme, H., Beyer, R.-E., Blunk, H.: (2021): Topology optimization of highly stressed machine tool components using the SLM process, Proceedings of the 21st international conference of the european society for precision engineering and nanotechnology (euspen's), June 7th - 10th June 2021, Virtual Conference, Copenhagen, DK, S. 499-502. | Datei | Beschreibung: Additive manufacturing (AM) processes have become increasingly important in recent years. Their application enables the manufacturing of individual, functional components using minimal material. In particular, AM processes are used for the manufacturing of lightweight structures in the aerospace industry. Apart from rare exceptions, the use of additively manufactured components in machine tools is not widespread. However, their functional lightweight design offers high potential for increasing productivity of machine tools. This potential is particularly high when components are frequently accelerated due to the possibility of reducing moments of inertia. This paper presents a concept of a topologically optimized, rotating, and mechanically high stressed lathe clamping system using the SLM (Selective Laser Melting) method. The topology optimization is performed numerically with the simulation software ANSYS. The additive materials applied are a stainless martensitic chrome-nickel steel (AISI 630) and an aluminum-silicon alloy (EN AC-43000). First, strength-relevant material characteristics are determined experimentally. The effects of different hardening processes on the material characteristics are predicted. These material properties are required for the parameterization of the clamping system simulation model. The modelling approach is described in the following. The simulation results of the non-optimized clamping system serve as a reference for evaluating the properties of the optimized system. The simulation model is then used to perform a mass-based topology optimization of four components of the clamping system with high moments of inertia. The components are evaluated simulatively with regard to their yield strength. As a result of the topology optimization, it is found that the moments of inertia of the components are reduced by up to 72%. Due to the functional, lightweight design of the clamping system, significant reductions in machining and non-productive time of up to 19% are possible.

Konferenz (reviewed)

Denkena, B., Bergmann, B., Ahlborn, P., Fuchs, J.: (2021): Design and optimization of a novel 2-DOF synchronous linear rotary drive, Proceedings of the 21st international conference of the european society for precision engineering and nanotechnology (euspen's), June 7th - 10th June 2021, Virtual Conference, Copenhagen, DK, 4 Seiten. | Datei |

Konferenz (reviewed)

Denkena, B., Bergmann, B., Teige, C.: (2021): Die Zukunft der Spanntechnik gestalten - Das IFW Hannover entwickelt im Projekt „TensorMill“ ein cyberphysisches Spannsystem, mav, 6/2021, S. 42-45. | Datei |

Zeitschriften/Aufsätze

Kaiser, S.: (2021): Teilautonome Fertigungszelle für individuelle Implantate, NC Fertigung, online, 15.06.2021, 4 Seiten. | Datei |

Zeitschriften/Aufsätze

Böß, V., Denkena, B., Dittrich, M.-A., Malek, T., Friebe, S.: (2021): Dexel‐Based Simulation of Directed Energy Deposition Additive Manufacturing, Journal of Manufacturing and Materials Processing, Vol. 5 (2021) 1, S. 1-12. | Datei |
DOI: 10.3390/jmmp5010009

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Dittrich, M.-A., Nguyen, H. N., Bild, K.: (2021): Self‑optimizing process planning of multi‑step polishing processes, Production Engineering Research and Development (WGP), Volume 15 (2021), Juni 2021, S. 563-571. | Datei |
DOI: 10.1007/s11740-021-01042-6

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Dittrich, M.-A., Heide, K. M.; (2021): Optimised process planning for re-contouring of repair-welded tool moulds by using a specific force model, 9th CIRP Conference on High Performance Cutting (HPC 2020), Procedia CIRP 101 (2021), 24th - 26th May 2021, Virtual Conference, S. 46-49. | Datei |
DOI: 10.1016/j.procir.2021.02.008

Konferenz (reviewed)

Sleiman, K., Malek, T., Hohnholz, A., Dittrich, M.-A., Jäschke, P., Kaierle, S., Denkena, B., Overmeyer, L.: (2021): Investigation on the temperature dependent morphology of deposited fibers for laser based glass additive manufacturing, Engineered Transparency (2021), Glass in Architecture and Structural Engineering John Wiley & Sons, Inc. Berlin (2021), 10 Seiten. | Datei |

Zeitschriften/Aufsätze (reviewed)

Dittrich, M.-A., Fohlmeister, S.: (2021): A deep q‑learning‑based optimization of the inventory control in a linear process chain, Production Engineering Research and Development (WGP), 15 (2021) 1, S. 35-43. | Datei |
DOI: 10.1007/s11740-020-01000-8

Zeitschriften/Aufsätze (reviewed)

Duarte, F.J., Magalhães, F.C., Abrão A.M., Denkena B., Breidenstein B., Meyer K., Maiß, O.: (2021): OTIMIZAÇÃO DA TENSÃO RESIDUAL E DA RUGOSIDADE SUPERFICIAL DO AÇO AISI 52100 SUBMETIDO AO PROCESSO DE ROLETEAMENTO POR ESFERAS, 11º Congresso Brasileiro de Engenharia de Fabricação, 24 a 26 de maio de 2021, Curitiba, PR, Brasil, 10 Seiten. | Datei |

Konferenz (reviewed)

Klauer, K., Altherr, N., Eifler, M., Kirsch, B., Böß, V., Seewig, J., Aurich, J. C.: (2021): Kinematic simulation to investigate the influence of the cutting edge topography when ball end micro milling, 18th CIRP Conference on Modeling of Machining Operations, Procedia CIRP 102 (2021), June 15-17, 2021, Ljubljana, Slovenia, S. 109-114. | Datei |
DOI: 10.1016/j.procir.2021.09.019

Konferenz (reviewed)

Klages, N., Gerken, J. F.: (2021): Entwicklung und Erforschung eines mechatronischen Werkzeugsystems zur Kompensation des Mittenverlaufs beim BTA-Tiefbohren, FGW - Forschungsgemeinschaft Werkzeuge und Werkstoffe e. V. (2021, online), 8 Seiten. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Klemme, H., Beyer, R.E., Blunk, H.: (2021): Additive Produktionsmethoden optimieren Maschinen, MM – Maschinenmarkt, 127 (2021) 1, S. 50-53. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Reimer, S., Schmidt, A.: (2021): Integrierte Kraftmessung macht Zerspanung fühlbar, MM – Maschinenmarkt, 127 (2021) 1, S. 48-49.

Zeitschriften/Aufsätze

Denkena, B., Bergmann, B., Kono, K., Ishiguro, R., Klemme, H.: (2021): CHARACTERIZATION OF HEAT CONDUCTIVITY OF ECCENTRICALLY ROTATING HEAT PIPES USED FOR COOLING OF MOTOR SPINDLES, MM Science Journal (Special Issue on ICTIMT 2021), July 2021, S. 4698-4705. | Datei |
DOI: 10.17973/MMSJ.2021_07_2021078

Zeitschriften/Aufsätze (reviewed)

Wichmann, M.: (2021): RESSOURCENEFFIZIENTE WIEDERVERWERTUNG VERSCHLISSENER FRÄSWERKZEUGE, Forum Schneidwerkzeug- und Schleiftechnik, 33 (2020) 4, S. 62-63. | Datei |

Zeitschriften/Aufsätze

Vortrag

… 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 …

Anzahl der gefundenen Publikationen: 685

Denkena, B., Breidenstein, B.: (2011): Cohesive Damage of PVD-Coated Cuting Tools - A Result of the Residual Stress Distribution., 9th International Conference THE "A" Coatings in Manufacturing Engineering, October 3rd, 2011, Thessaloniki, 23 Seiten.

Vortrag

Varahram, A., Srisupattarawanit, T., Breidenstein, B., Hassel, Th., Schiefer, F., Denkena, B., Ostermeyer, G.-P., Bach, F.W.: (2011): Design of Folded Tubulars for Expandable Casing Applications., Celle Drilling 2011, 13.09.2011, Celle, 23 Seiten.

Vortrag

Denkena, B., Köhler, J., Grove, T.: (2011): Machining induced influence on the subsurface of milled aerospace parts., New manufacturing technologies in aerospace industry : proceedings / Machining Innovations Conference, September 23rd 2011 in Hannover at the EMO, S. 274-283.

Vortrag

Denkena, B., Hahmann, D.: (2011): Grinding of Steel-Ceramic-Composites., Fachmesse EMO Hannover 2011, September 21th, Hannover, 16 Seiten.

Vortrag

Denkena, B., Hahmann, D.: (2011): Grinding of Microstructures., Fachmesse EMO Hannover 2011, September 20th, Hannover, 16 Seiten.

Vortrag

Denkena, B., Mörke, T.: (2011): Data storage by means of micro patterned surfaces., Fachmesse EMO Hannover 2011, 23. September, Hannover, 11 Seiten.

Vortrag

Denkena, B., Köhler, J., Ermisch, A.: (2011): Wire Cutting Tool Concepts for Steel Machining., 14th International Symposium of Advances in Abrasive Technology (ISAAT 2011), September 20th, Stuttgart, 14 Seiten.

Vortrag

Denkena, B., Meyer, R., Stiffel, J.-H.: (2011): Innovative Cutting Edge Geometry for Hard Turning., Fachmesse EMO Hannover 2011, September 22nd, 17 Seiten.

Vortrag

Friederichs, J.: (2011): Planar feed drive for machine tools., PZH Forum EMO, September 22nd, 2011, 10 Seiten.

Vortrag

Denkena, B., Köhler, J., Kästner, J., Hahmann, D.: (2011): Grinding of Steel-Ceramic-Composites., 14th International Symposium of Advances in Abrasive Technology (ISAAT 2011), September 20th, 2011, Stuttgart, 15 Seiten.

Vortrag

Hülsemeyer, L.: (2011): Efficient and value oriented Machine Tools., Fachmesse EMO Hannover 2011, September 23rd, Hannover, 9 Seiten.

Vortrag

Eikötter, M.: (2011): Digitale Fabrik., 2. AGILITA Meilensteintreffen, 17. März 2011, Varel, 78 Seiten.

Vortrag

Denkena, B., Dege, J.H.: (2011): Process Force Prediction in Orbital Drilling of Ti-64., 9th International Conference on Advanced Manufacturing Systems and Technology (AMST'11), June 16th, 2011, Mali Losinj, 14 Seiten.

Vortrag

Charlin, F., Dannenberg, M.: (2011): Integrative Planung und Auslegung fertigungstechnischer Prozessketten., Fachgespräch zwischen Industrie und Wissenschaft (Industrieworkshop), 18. August 2011, Fridingen, 21 Seiten.

Vortrag

Köhler, J., van der Meer, M., Turger, A.: (2011): Grinding and Polishing of Ceramic Knee Implants. , 61th CIRP General Assembly, August 26th, 2011, Budapest, Hungary, 24 Seiten.

Vortrag

Neugebauer, R., Denkena, B.: (2011): Velocity Effects in Metal Forming and Machining Processes., 61th CIRP General Assembly, August 22, 2011, Budapest, Hungary, 33 Seiten.

Vortrag

Denkena, B., Möhring, H.-C., Bickel, W.: (2011): Integrated active damping of main spindles., 61th CIRP General Assembly, August 26th, 2011, Budapest, Hungary, 16 Seiten.

Vortrag

Möhring, H.-C., Gümmer, Olaf, Fischer, R.: (2011): Active error compensation in contour-controlled grinding., 61th CIRP General Assembly, August 21-27, 2011, Budapest, Hungary, 32 Seiten.

Vortrag

Denkena, B., Bassett, E.: (2011): Effects of the cutting edge microgeometry on tool wear and its thermo-mechanical load. , 61th CIRP General Assembly, August 23th, 2011, Budapest, Hungary, 30 Seiten.

Vortrag

Eikötter, M.: (2011): Life-cycle based technology planning and assessment of machine tools within the aviation industry., 44th CIRP Conference on Manufacturing Systems, June 1st, 2011, Madison, 22 Seiten.

Vortrag

Publikationen des Instituts für Fertigungstechnik und Werkzeugmaschinen

Vortrag