Publikationen – Institut für Fertigungstechnik und Werkzeugmaschinen

Hier finden Sie die Dissertationen des IFW

Zu den Dissertationen

Hier finden Sie die Patente des IFW

Zu den Patenten

… 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 …

Anzahl der gefundenen Publikationen: 4737

Reichert, L., Krieglsteiner, J., Schmidt, C., Horst, P.: (2018): SIMPLIFIED REPRESENTATION OF COMPLEX STRUCTURAL COMPONENTS FOR FINITE-ELEMENT-ANALYSIS, ECCM18 - 18th European Conference on Composite Materials, Athens, Greece, 24-28th June 2018, 8 Seiten. | Datei |

Konferenz

Herwig, A., Schmidt, C., Horst, P.: (2018): NUMERICAL INVESTIGATION OF A LAYERED HYBRID LOAD INTRODUCTION ELEMENT FOR THIN-WALLED CFRP STRUCTURES, ECCM18 - 18th European Conference on Composite Materials, Athens, Greece, 24-28th June 2018, 8 Seiten. | Datei |

Konferenz

Schmidt, C., Behr, M., Herwig, A., Serna, J., Denkena, B., Horst, P., Meiners, D.: (2018): Dreidimensionale Faserverstärkung in additiv gefertigten Kunststoffbauteilen, VDI-Z, 160 (2018), Nr. 6, S. 67-70. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Grove, T., Bouabid, A.: (2018): Wie die richtige Schleifscheibenbindung aussieht, Produktion, Technik und Wirtschaft für die deutsche Industrie, Oktober 2018, 2 Seiten. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Grove, T., Harmes, J.: (2018): Electro contact discharge dressing of wire sawing tools, Proceedings of the 21st International Symposium on Advances in Abrasive Technology, ISAAT 2018, October 14-17, 2018, Ryerson University, Toronto, Canada, 7 Seiten. | Datei |

Konferenz (reviewed)

Denkena, B., Bergmann, B., Fuchs, J.: (2018): Magnetisch gelagerter Kreuztisch, VDI-Z, 160 (2018), Nr. 3, S. 62-65. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Dittrich, M.-A., Henning, S., Lindecke, P.: (2018): Investigations on a standardized process chain and support structure related rework procedures of SLM manufactured components, 18th Machining Innovations Conference for Aerospace Industry (MIC 2018), Procedia Manufacturing 18 (2018), S. 50-57. | Datei |

Konferenz (reviewed)

Denkena, B., Bergmann, B., Böhse, F., Reiners, J., Königsberg, J., Ponick, B.: (2018): Stator-Integrated Damping of Chatter Vibrations for Induction Motor Spindles, International Conference on Electrical Machines and Systems (ICEMS 2018), 07.- 10. Oktober 2018, Jeju, Korea, S. 99 - 103. | Datei |

Konferenz (reviewed)

Taubert, J., Rehe, M., Müller-Polyzou, R.: (2018): Application of camera controlled laser projection systems for manual mounting tasks, Dritte Transdisziplinäre Konferenz "Technische Unterstützungssysteme, die die Menschen wirklich wollen", Hrsg. R. Weidner und A. Karafillidis, Konferenzband, Hamburg 2018, S. 67-76. | Datei |

Konferenz (reviewed)

Denkena, B., Dittrich, M.-A., Uhlich, F., Wichmann, M., Mücke, M.: (2018): Process parallel simulation of workpiece temperatures using sensory workpieces, CIRP Journal of Manufacturing Science and Technology, Vol. 21 (2018), S. 140-149. | Datei |
DOI: 10.1016/j.cirpj.2018.01.004

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Rehe, M., Wagener, C.: (2018): Energy consumption analysis of modules for CPS retrofitting, 4th International Conference on System-Integrated Intelligence, Procedia Manufacturing 24 (2018), S. 48-53. | Datei |

Konferenz (reviewed)

Denkena, B., Grove, T., Schmidt, C.: (2018): Machining of Micro Dimples for Friction Reduction in Cylinder Liners, 6th CIRP Global Web Conference “Envisaging the future manufacturing, design, technologies and systems in innovation era”, Procedia CIRP 78 (2018), S. 318-322. | Datei |

Konferenz (reviewed)

Denkena, B., Bergmann, B., Breidenstein, B., Prasanthan, V., Witt, M.: (2018): Analysis of potentials to improve the machining of hybrid workpieces, Production Engineering Research and Development, published online: 19th December 2018, 9 Seiten. | Datei |
DOI: 10.1007/s11740-018-00870-3

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Krödel, A., Shanib, M., Kuhlemann, P.: (2018): HLProKet - Hochleistungsprozesskette in der Großserienfertigung, Berichte aus dem IFW, Band 11/2018, Hrsg. B. Denkena, 122 S.
ISBN: 978-3-95900-226-4

Bücher

Denkena, B., Grove, T., Suntharakumaran, V.: (2018): Chip formation in machining metal bonded grinding layers, 6th CIRP Global Web Conference “Envisaging the future manufacturing, design, technologies and systems in innovation era”, Procedia CIRP 78 (2018), S. 55-60. | Datei |

Konferenz (reviewed)

Denkena, B., Grove, T., Maiß, O., Krödel, A., Schwab, H., Kühn, U.: (2018): Cutting mechanism and surface integrity in milling of Ti-5553 processed by selective laser melting†, Journal of Mechanical Science and Technology, Vol. 32 (2018) 10, S. 4883 - 4892. | Datei | Beschreibung: Titanium alloys are of significant importance in several high performance applications such as aerospace components or medical implants. Advances in additive technologies lead to an increase of additively built workpieces, offering new possibilities regarding functional integration and lightweight structures. Several authors have shown that microstructural, mechanical and thermal material properties differ significantly from those of cast alloys. Although additively produced parts are near net-shape, most of them are machined after the building process, to achieve the requirements regarding surface finish and dimensional accuracy. Titanium is generally known as a hard-to-cut material due to its thermo-mechanical properties. Although there is a profound knowledge about the machinability of conventionally cast and wrought titanium alloys, there is a lack of understanding regarding the machining of additively built titanium. In this paper, the machinability of an additively built Ti-5Al-5V-5Mo-3Cr alloy (Ti-5553) is analyzed regarding chip formation, cutting forces and tool wear. Three different generation methods, conventional wrought, selective laser melting and selective laser melting with in-process (insitu) heat treatment are investigated. It is shown that the machinability differs significantly compared to a conventional wrought alloy, which is linked to decreased contact length on the tool rake face and higher mechanical tool load (up to + 23 % force increase). Highest tool load is found for titanium alloy, which is built using selective laser melting and in-process heat treatment. Furthermore, the Surface integrity after machining is analyzed regarding hardness, roughness and residual stresses. Hereby, high compressive residual stresses for additively built titanium with in-process heat treatment are obtained due to the higher mechanical tool load. Therefore, it could be shown that the generation method (e.g. selective laser melting) needs to be considered for the later process design in finish machining.

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Grove, T., Krödel, A.: (2018): Influence of pulsed laser ablation on the surface integrity of PCBN cutting tool materials, The International Journal of Advanced Manufacturing Technology, published online: 23 November 2018, 12 Seiten. | Datei |
DOI: 10.1007/s00170-018-3032-4

Zeitschriften/Aufsätze (reviewed)

Denkena, B., Grove, T., Krödel, A.: (2018): Laserpräparation von Schneidkantenmikrogeometrien an pCBN-Werkzeugen, Diamond Business, Ausgabe 4/2018, S. 58-64. | Datei |

Zeitschriften/Aufsätze

Denkena, B., Schmidt, C., Werner, S.: (2018): Continuous Draping of Double Curved Geometries – A Geometrical Approach to Describe an Automated Layup Process of Fabrics on Complex Surface , SAMPE Europe Conference 2018 Southampton, 12.09.2018, Southampton, Vereinigtes Königreich, 8 Seiten. | Datei |

Konferenz (reviewed)

Denkena, B., Dittrich, M.-A., Stobrawa, S., Jenkner, I.: (2018): Simulation-based personnel planning considering individual competences of employee, Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), "Advances in Production Research", November 19-20, 2018, Aachen, Hrsg. Schmitt, R., Schuh, G., S. 613-623. | Datei |
DOI: 10/1007/978-3-030-03451-1_60

Konferenz (reviewed)

Vortrag

… 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Anzahl der gefundenen Publikationen: 683

Denkena, B., Radons, G., Blümel, P.: (2006): From Conditiion Monitoring to Wear Prognosis and Predictive Maintenance. , XVII Workshop on Supervising and Diagnostics of Machining Systems, 13. March 2006, Karpacz, Poland, 24 Seiten.

Vortrag

Huke, P.: (2006): Einsatz von Laserstrahlung zur Verbesserung der Bauteilqualität von Karosserieblechen. Prozess: Laserstrahlumformen., World Laser Summer School 2006, 28. Juni 2006, Hannover, 13 Seiten.

Vortrag

Publikationen des Instituts für Fertigungstechnik und Werkzeugmaschinen

Vortrag